Shielding of a reactor is required for protection of people and environment during normal operation and accidental situations. In the present paper we investigated the shielding parameters viz. mass attenuation coefficients, linear attenuation coefficients, tenth-value layer, effective atomic numbers, kerma relative to air and exposure buildup factors for gamma-ray for ordinary, heavy, and super heavy concretes. Macroscopic effective removal cross-sections for fast neutron had also been calculated. Ordinary concrete is economically suitable for mixture high energy gamma-ray and neutron as it has large weight fraction of low-Z as compared with super heavy concretes to slow down the neutron. Super heavy concretes are superior shielding for both reactor operation and accident situations. The study is useful for optimizing for shielding design and radiation protection in the reactors.

Total mass attenuation coefficients, µm, effective atomic number, Zeff, and effective electron density, Neff, of different gases - carbon dioxide, methane, acetylene, propane, butane, and pentane used in radiation detectors, have been calculated for the photon energy of 1 keV to 100 GeV. Each gas has constant Zeff values between 0.10 to 10 MeV photon energies; however, these values are way far away from ICRU tissue. Carbon dioxide gas shows the closest tissue equivalence in the entire photon energy spectrum. Relative tissue equivalences of the mixtures of gases with respect to ICRU tissue are in the range of 0.998-1.041 for air, argon (4.5%) + methane (95.5%), argon (0.5%) + carbon dioxide (99.5%), and nitrogen (5%) + methane (7%) + carbon dioxide (88%). The gas composition of xenon (0.5%) + carbon dioxide (99.5%) shows 1.605 times higher tissue equivalence compared to the ICRU tissue. The investigated photon interaction parameters are useful for exposure and energy absorption buildup factors calculation and design, and fabrication of gaseous detectors for ambient radiation measurement by the Geiger-Muller detector, ionization chambers and proportional counters

The proximate composition of seeds, physicochemical characteristics, and fatty acid profiles of Ziziphus oenoplia seed oil were determined in this study. The seeds possessed low moisture (4.54%) and high carbohydrate (42.96%) and protein content (40%), making the seed oil suitable for storage and consumption. The saponification value (197.80) of the seed oil makes it a promising source for the soap and shampoo industry. The iodine and saponification values are comparable to those of major edible seed oils such as groundnut and soybean. The high amount of monounsaturated fatty acids (53.41%), especially oleic acid (53.38%), present in the oil makes it a better source for a low-fat diet and may reduce the risk of various heart-related diseases.

The proximate, physicochemical, and fatty acid compositions of seed oil extracted from khat (Catha edulis) were determined. The oil, moisture, crude protein, crude fiber, crude carbohydrate, and ash content in seeds were 35.54, 6.63, 24, 1.01, 30.4 %, and 1.32 g/100 g DW respectively. The free fatty acids, peroxide value, saponification value, and iodine value were 2.98 %, 12.65 meq O2/kg, 190.60 mg KOH/g, and 145 g/100 g oil, respectively. Linolenic acid (C18:3, 50.80 %) and oleic (C18:1, 16.96 %) along with palmitic acid (C16:0, 14.60 %) were the dominant fatty acids. The seed oil of khat can be used in industry for the preparation of liquid soaps and shampoos. Furthermore, high levels of unsaturated fatty acids make it an important source of nutrition especially as an animal product substitute for omega‐3 fatty acids owing to the high content of linolenic acid.