We have observed thermal gating, i.e. electrostatic gating induced by hot electrons. The effect occurs in a device consisting of two capacitively coupled quantum dots. The double dot system is coupled to a hot electron reservoir on one side (QD1), while the conductance of the second dot (QD2) is monitored. When a bias across QD2 is applied we observe a current which is strongly dependent on the temperature of the heat reservoir. This current can be either enhanced or suppressed, depending on the relative energetic alignment of the QD levels. Thus, the system can be used to control a charge current by hot electrons.

This article reviews recent thermoelectric experiments on quantum dot (QD) systems. The experiments focus on two types of inter‐dot coupling: tunnel coupling and Coulomb coupling. Tunnel‐coupled QDs allow particles to be exchanged between the attached reservoirs via the QD system. Hence, an applied temperature bias results in a thermovoltage. When being investigated as a function of QD energies, this leads to the thermopower stability diagram. Here, largest thermovoltage is observed in the regions of the triple points. In a QD system which exhibits only capacitive inter‐dot coupling, electron transfer is suppressed. Such a device is studied in a three‐terminal geometry: while one QD connects to the heat reservoir, the other one can exchange electrons with two reservoirs at a lower temperature. When the symmetry of the tunneling coefficients in the cold system is broken, the device becomes an energy harvester: thermal energy is extracted from the heat reservoir and is converted into a directed charge current between the two cold reservoirs. This review illustrates the large potential of multi‐QD devices for thermoelectrics and thermal management at the nanometer‐scale.