No abstract

No abstract

No abstract

No abstract

No abstract

Halloysite nanotubes (HNTs) and intumescent flame retardant (IFR)-filled 80/20 (wt/wt) polypropylene/acrylonitrile–butadiene–styrene (PP/ABS) blend and their composites in the presence of dual compatibilizer have been prepared using twin screw extruder followed by injection molding. There exists the formation of α- and β-form of PP crystals in addition to enhancement in crystallinity of PP phase by an addition of HNTs and IFR in 80/20 (wt/wt) PP/ABS blend and their composites in the presence of dual compatibilizer. In addition, scanning electron microscopy (SEM) reveals the formation of matrix-droplet morphology, and the dispersion of HNTs and IFR in 80/20 (wt/wt) PP/ABS blend and its composites in the presence of dual compatibilizer results in a refinement in matrix-droplet morphology. This has resulted in an enhancement in tensile and impact properties of HNTs- and IFR-filled 80/20 (wt/wt) PP/ABS blend and their composites in the presence of dual compatibilizer. Thermal stability also increases by an addition of HNTs and IFR in 80/20 (wt/wt) PP/ABS blend and their composites in the presence of dual compatibilizer due to formation of intumescent char.

Composite polymer electrolytes were prepared from PEO (polyethylene oxide), lithium perchlorate (LiClO 4 ), and with three different dielectric reinforcements such as lead zirconium titanate (PZT)-12000, barium titanate (BT)-1000, and Alumina (Al 2 O 3 )-6. Differential scanning calorimetry and X-ray diffractometry were employed to reveal the crystalline nature of the electrolytes. The conductivity of the composite polymer electrolytes were measured by impedance spectrometry. Among the three systems, PZT reinforced composite exhibits maximum ionic conductivity of 2.9 3 10 25 S/cm at room temperature. The ionic conductivity of the polymer composites increases with increase in dielectric constant of the reinforcement. The composite with alumina reinforcement displayed strongly modified properties with very weak temperature dependence of conductivity. POLYM. COMPOS.,[36][37][38][39][40][41][42][43][44][45][46]

No abstract