No abstract

The feasibility and cost-effectiveness of hydrogen-based microgrids in facilities, such as public buildings and small- and medium-sized enterprises, provided by photovoltaic (PV) plants and characterized by low electric demand during weekends, were investigated in this paper. Starting from the experience of the microgrid being built at the Renewable Energy Facility of Sardegna Ricerche (Italy), which, among various energy production and storage systems, includes a hydrogen storage system, a modeling of the hydrogen-based microgrid was developed. The model was used to analyze the expected performance of the microgrid considering different load profiles and equipment sizes. Finally, the microgrid cost-effectiveness was evaluated using a preliminary economic analysis. The results demonstrate that an effective design can be achieved with a PV system sized for an annual energy production 20% higher than the annual energy requested by the user and a hydrogen generator size 60% of the PV nominal power size. This configuration leads to a self-sufficiency rate of about 80% and, without public grants, a levelized cost of energy comparable with the cost of electricity in Italy can be achieved with a reduction of at least 25–40% of the current initial costs charged for the whole plant, depending on the load profile shape.

No abstract

No abstract

Pt-Co alloys prepared by high energy ball milling synthesis were tested as electrocatalysts for hydrogen fueled Polymer Electrolyte Membrane Fuel Cells (PEMFC). In the present contribution we report on the first results regarding the electrochemical behaviour of two samples of Pt-Co alloys. One sample contains 20 wt.% alloy Pt:Co in the molar ratio 0.25:0.75 and C 80 wt.% and the second one Pt:Co in the molar ratio 0.75:0.25 and C 80 wt.%. The electrochemically active surface (EAS) was determined by cyclic voltammetry data while the electrocatalyst performance in a real cell was obtained by assembling Membrane Electrode Assemblies (MEAs) with the considered sample at the cathode. The results obtained, though indicating a lower performance than all-Pt catalysts, are quite interesting as they point out the importance of the C/Pt, Nafion/Pt and Pt/Co ratios that exert a deep influence onto the cell performance.