An international study of fire modelling was conducted prior to the Dalmarnock Fire Test One in order to assess the state-of-the-art of fire simulations using a round-robin approach. This test forms part of the Dalmarnock Fire Tests, a series of experiments conducted in 2006 in a high-rise building. The philosophy behind the tests was to provide measurements in a realistic fire scenario involving multiple fuel packages and non-trivial fire growth, and with an instrumentation density suitable for comparison with computational fluid dynamics models. Each of the seven round-robin teams independently simulated the test scenario a priori using a common detailed description of the compartment geometry, fuel packages, ignition source and ventilation conditions. The aim of the exercise was to forecast the fire development as accurately as possible and compare the results. The aim was not to provide an engineering analysis with conservative assumptions or safety factors. Comparison of the modelling results shows a large scatter and considerable disparity among the predictions, and between predictions and experimental measurements. The scatter of the simulations is much larger than the error and variability expected in the experiments. The study emphasises on the inherent difficulty of modelling fire dynamics in complex fire scenarios like Dalmarnock, and shows that the accuracy to predict fire growth (i.e. evolution of the heat released rate) is, in general, poor.

No abstract

SUMMARYGypsum plasterboards are widely used for compartmentation and for retarding the spread of fire in buildings. Although numerous heat transfer studies have been conducted, literature indicates there are extensive differences in the thermal properties used in these studies. Comprehensive experimental and numerical analyses have been conducted to elucidate the leading factor in the ablation of a gypsum board system when it is exposed to the standard fire resistance test. A methodology based on both simultaneous thermal analysis and computational modelling is proposed to understand the behaviour of a gypsum plasterboard when the boundary temperature increases quickly as one side of the wall is subjected to the standard ISO 834. Finally, four different wall assemblies made of a commercial fireproof plasterboard system are exposed to the standard test. The temperature on the unexposed face is examined to validate the computational model of the plasterboard.

No abstract

No abstract