The present work reports the study of different ketoprofen:excipient formulations, in order to determine the effect of the polymer substitution and type of diluent on the drug-release mechanism. Substituted cellulose-methylcellulose, hydroxypropylcellulose and hydroxypropylmethylcellulose were used as polymers, while lactose monohydrate and beta-cyclodextrin were tested as diluents. Distinct test formulations were prepared, containing 57.14% of ketoprofen, 20.00% of polymer, 20.29% of diluent, and 1.71% of talc/0.86% of magnesium stearate as lubricants. The tablets were tested for their drug content, weight variation, hardness, thickness, tensile strength, friability, swelling and release ratio. Polymers MC25 and HPC were found not to be appropriate for the preparation of modified release ketoprofen hydrophilic matrix tablets, while HPMC K15M and K100M showed to be advantageous. The analysis of the release profiles in the light of distinct kinetic models (zero-order, first-order, Higuchi and Korsmeyer-Peppas) led to the conclusion that the type of polymer did not influence the release mechanism of the drug. The mean dissolution time (MDT) was determined, the highest MDT value being obtained for HPMC formulations. Moreover, the drug-release process was found to be slightly influenced by the type of diluent, either lactose or beta-cyclodextrin.

A thorough conformational analysis of ibuprofen [2-(4-isobutylphenyl) propionic acid] was carried by out, using density functional theory (DFT) calculations coupled to optical vibrational spectroscopy (both Raman and FTIR). Eight different geometries were found to be energy minima. The relative orientations of the substituent groups in the ibuprofen molecule, which can be considered as a para-substituted phenyl ring, were verified to hardly affect its conformational stability. The internal rotations converting the calculated conformers of ibuprofen were studied and the intramolecular interactions governing the conformational preferences of the molecule were analyzed by quantitative potential energy deconvolution using Fourier type profiles. The harmonic vibrational frequencies and corresponding intensities were calculated for all the conformers obtained, leading to the assignment of the spectra, and evidencing the sole presence of one of the lowest energy conformers in the solid state. Vibrational spectroscopic proof of intermolecular hydrogen bonds between the carboxylic groups of adjacent ibuprofen molecules, leading to the formation of dimers, was also obtained. ß

A conformational study of ketoprofen was carried out by both density functional theory (DFT) calculations and Raman spectroscopy. Nine different geometries were found to correspond to energy minimum conformations but only one of them was experimentally detected in the condensed phase spectra. Those rotations which interconvert the five most stable conformers were studied and the intramolecular interactions governing the corresponding conformational preferences were assessed. A thorough vibrational analysis was performed, leading to the assignment of both the solid and liquid spectra. Evidence for formation of intermolecular hydrogen bonds between carboxylic groups of adjacent ketoprofen molecules, leading to dimeric entities, was obtained.

Cellulose derivatives are the most frequently used polymers in formulations of pharmaceutical products for controlled drug delivery. The main aim of the present work was to evaluate the effect of different cellulose substitutions on the release rate of ibuprofen (IBP) from hydrophilic matrix tablets. Thus, the release mechanism of IBP with methylcellulose (MC25), hydroxypropylcellulose (HPC), and hydroxypropylmethylcellulose (HPMC K15M or K100M) was studied. In addition, the influence of the diluents lactose monohydrate (LAC) and beta-cyclodextrin (beta-CD) was evaluated. Distinct test formulations were prepared containing: 57.14% of IBP, 20.00% of polymer, 20.29% of diluent, 1.71% of talc lubricants, and 0.86% of magnesium stearate as lubricants. Although non-negligible drug-excipient interactions were detected from DSC studies, these were found not to constitute an incompatibility effect. Tablets were examined for their drug content, weight uniformity, hardness, thickness, tensile strength, friability, porosity, swelling, and dissolution performance. Polymers MC25 and HPC were found to be unsuitable for the preparation of this kind of solid dosage form, while HPMC K15M and K100M showed to be advantageous. Dissolution parameters such as the area under the dissolution curve (AUC), the dissolution efficiency (DE(20 h)), dissolution time (t 50%), and mean dissolution time (MDT) were calculated for all the formulations, and the highest MDT values were obtained with HPMC indicating that a higher value of MDT signifies a higher drug retarding ability of the polymer and vice-versa. The analysis of the drug release data was performed in the light of distinct kinetic mathematical models-Kosmeyer-Peppas, Higuchi, zero-, and first-order. The release process was also found to be slightly influenced by the kind of diluent used.

The influence of cellulose ether derivatives on ibuprofen release from matrix tablets was investigated. Raman spectroscopy and differential scanning calorimetry (DSC) experiments were used, in order to examine the compatibility between the matrix components: both excipients and ibuprofen. While both the DSC and Raman results did not detect any incompatibilities, DSC revealed the existence of some drug:excipient interactions, reflected by variations in the hydration/dehydration processes. Formulations containing mixtures of polymers with both low and high viscosity grades-methylcellulose (MC25) or hydroxypropylcellulose (HPC), and hydroxypropylmethylcellulose (HPMC K100M), respectively--were prepared by a direct compression method (using 20, 25, and 30% of either MC25 or HPC). The tablets were evaluated for their drug content, weight uniformity, hardness, thickness, tensile strength, friability, porosity, surface area, and volume. Parameters such as the mean dissolution time (MDT) and the dissolution efficiency (DE) were calculated in all cases. The solid formulations presently studied demonstrated a predominantly Fickian diffusion release mechanism.

The inclusion complexes of 4-X-benzaldehyde guests (X = F, Cl, Br) in a-, b-and g-cyclodextrins (aCD, bCD and gCD) were prepared and characterized by means of thermogravimetry, differential scanning calorimetry (DSC) and vibrational spectroscopy. The stoichiometry of the inclusion complexes ranges from 2 : 1 to 1 : 2, depending on the cavity size of the host. Sensitive vibrational modes such as C O and ring CH stretching modes were used to monitor the effects of the inclusion process and to assess the preferred inclusion geometry for each host-guest pair. On the whole, the spectral observations suggest that the small aCD cavity imposes important structural restrictions on the guest molecule, while the larger gCD cavity allows 'liquid-type' intermolecular contacts.

The effect of cellulose ether polymer mixtures, containing both hydroxypropylcellulose (HPC) and hydroxypropylmethylcellulose (HPMC K15M or K100M), on ketoprofen (KTP) release from matrix tablets was investigated. In order to evaluate the compatibility between the matrix components, Raman spectroscopy, scanning electron microscopy (SEM), and X-ray powder diffraction (XRPD) experiments were performed. The results evidence the absence of significant intermolecular interactions that could eventually lead to an incompatibility between the drug and the different excipients. Formulations containing mixtures of polymers with both low and high viscosity grades were prepared by a direct compression method, by varying the polymer/polymer (w/w) ratio while keeping the drug amount incorporated in the solid dispersion constant (200 mg). The hardness values of different matrices were found within the range 113.8 to 154.9 N. HPLC analysis showed a drug content recovery between 99.3 and 102.1%, indicating that no KTP degradation occurred during the preparation process. All formulations attained a high hydration degree after the first hour, which is essential to allow the gel layer formation prior to tablet dissolution. Independent-model dissolution parameters such as t(10%) and t(50%) dissolution times, dissolution efficiency (DE), mean dissolution time (MDT), and area under curve (AUC) were calculated for all formulations. Zero-order, first-order, Higuchi, and Korsmeyer-Peppas kinetic models were employed to interpret the dissolution profiles: a predominantly Fickian diffusion release mechanism was obtained - with Korsmeyer-Peppas exponent values ranging from 0.216 to 0.555. The incorporation of HPC was thus found to play an essential role as a release modifier from HPMC containing tablets.

Differential scanning calorimetry (DSC) was used to investigate and detect incompatibilities between drugs such as: ibuprofen (IBU) or ketoprofen (KETO) with cellulose ether derivatives, which are frequently applied on controlled release dosage forms. Binary mixtures concerning methylcellulose (MC25) or hydroxypropylcellulose (HPC) with hydroxypropylmethylcellulose (HPMC) K15M or K100M in different ratios were prepared and evaluated by the appearance, shift, or disappearance of peaks and/or variations in the corresponding DeltaH values. According to the DSC results, binary mixtures between those polymers were found to be compatible, but their mixture with IBU or KETO, promotes a solid-solid interaction mainly with 1:1:1 (w/w) ratio (drug-excipient). However, when the drug:excipient interactions were detected, they were not found to affect the drug bioavailability. DSC was successfully employed to evaluate the compatibility of the drugs with the selected polymers.