Copper (Cu) ions have a variety of advantageous biological functionalities, such as proangiogenic and bactericidal activities. Given the intrinsic biodegradability and biocompatibility, silicate-based mesoporous bioactive glass nanoparticles (MBGNs) are considered as promising platforms for the delivery of Cu ions. However, effective incorporation of Cu into MBGNs still faces challenges, e.g., particle aggregation, the formation of insoluble crystalline Cu-based nanoparticles, and a low loading amount of Cu. We report a novel method to synthesize chemically homogenous and highly dispersed Cu-containing MBGNs (Cu-MBGNs) with tunable Cu concentration by using ascorbic acid/Cu complexes as the precursor of Cu in a microemulsion-assisted sol-gel approach. Cu-MBGNs exhibited a sphere-like shape with a particle size between 100 and 300 nm while their pore size varied from 2 to 10 nm. The inclusion of Cu, regardless of the incorporated concentration, did not significantly affect the morphology of particles. ICP-AES results indicated that the concentration of Cu in the particles could be conveniently tuned from 0 to ~6 mol% by controlling the amount of ascorbic acid/Cu complexes added, while the formation of crystalline Cu-based nanoparticles was avoided. The amorphous feature of Cu-MBGNs was proved by XRD, while the predominant oxidation state of Cu was evidenced to be Cu 2+ by XPS. The incorporation of Cu did not inhibit the apatite-forming ability (bioactivity) of the particles in contact with simulated body fluid. Cu-MBGNs exhibited the capability of releasing Cu, Si, and Ca ions over time in the physiological fluid. The concentration of released Cu ions could be controlled by selecting specific Cu-MBGNs of different Cu contents. The dissolution products of most Cu-MBGNs at the dosage of 1, 0.1, and 0.01 mg/mL did not exhibit cytotoxicity, while only 7Cu-MBGN was cytotoxic at the dosage of 1 mg/mL. This study provided a feasible strategy to synthesize highly dispersed amorphous Cu-MBGNs with high Cu concentrations for biomedical applications. The particles exhibit great potential as building blocks for developing composite 3D scaffolds, coatings, and drug carriers, particularly when a large amount of particles incorporated may compromise the properties of (polymer) matrix materials while a relatively high concentration of released Cu ions is still required.

No abstract

Pyrolysis of ladder-like silsesquioxanes in oxygen-free atmosphere leads to the formation of silicon oxycarbides (black glasses). Black glasses are materials of amorphous silica structure where some amount of O 2-ions were replaced by C 4-ions. This exchange leads to local increase in bonds density and therefore improvement in mechanical, thermal, and chemical properties. Thanks to this modification, silicon oxycarbide glasses can be used in a variety of applications like: protective coatings and interconnectors in solid oxide fuel cells. Xerogels were prepared by sol-gel method, and ladder-like silsesquioxanes were used as precursors. Samples were burned at 200-1000°C in inert atmosphere. Structural studies in the middle infrared range (MIR) and SEM with EDX confirmed the presence of SiOC bonds in obtained materials. MIR analysis of solid samples together with TG/dTG measurements allowed defining the process for the formation of black glasses.

Black glasses are amorphous materials based on silicon oxycarbide. The use of precursors in the form of ladder‐like silsesquioxanes enables the control of the amount of carbon ions in the glass network by adjusting ratios of T to D structural units in precursors. In this study, four different sols precursors of four different layers of black glasses on titanium substrates were prepared. The materials were analyzed with the use of various spectroscopic and microscopic methods. Formation of continuous and hermetic layers resistant to corrosion was proven. The black glasses layers were examined as materials for biomedical applications. Therefore, preliminary tests of their bioactivity and biocompatibility were performed. The best results were obtained for the material of lower contribution of carbon ions.

No abstract