This paper provides a temporal model of the direct and inverse scattering problem for the propagation of transient ultrasonic waves in a homogeneous isotropic slab of porous material having a rigid frame. This new time domain model of wave propagation takes into account the viscous and thermal losses of the medium as described by the model of Johnson et al. [D. L. Johnson, J. Koplik, and R. Dashen, J. Fluid. Mech. 176, 379 (1987)] and Allard [J. F. Allard (Chapman and Hall, London, 1993)] modified by a fractional calculus based method applied in the time domain. This paper is devoted to the analytical calculus of acoustic field in a slab of porous material. The main result is the derivation of the expression of the scattering operators (reflection and transmission) which are the responses of the medium to an incident acoustic pulse. In this model the reflection operator is the sum of two contributions: the first interface and the bulk of the medium. Experimental and numerical results are given as a validation of our model.
This paper concerns the ultrasonic characterization of human cancellous bone samples by solving the inverse problem using experimental transmitted signals. The ultrasonic propagation in cancellous bone is modeled using the Biot theory modified by the Johnson et al. model for viscous exchange between fluid and structure. The sensitivity of the Young modulus and the Poisson ratio of the skeletal frame is studied showing their effect on the fast and slow wave forms. The inverse problem is solved numerically by the least squares method. Five parameters are inverted: the porosity, tortuosity, viscous characteristic length, Young modulus, and Poisson ratio of the skeletal frame. The minimization of the discrepancy between experiment and theory is made in the time domain. The inverse problem is shown to be well posed, and its solution to be unique. Experimental results for slow and fast waves transmitted through human cancellous bone samples are given and compared with theoretical predictions.
The purpose of this paper is to present a method for the ultrasonic characterization of air-saturated porous media, by solving the inverse problem using only the reflected waves from the first interface to infer the porosity, the tortuosity, and the viscous and thermal characteristic lengths. The solution of the inverse problem relies on the use of different reflected pressure signals obtained under multiple obliquely incident waves, in the time domain. In this paper, the authors propose to solve the inverse problem numerically with a first level Bayesian inference method, summarizing the authors' knowledge on the inferred parameters in the form of posterior probability densities, exploring these densities using a Markov-Chain Monte-Carlo approach. Despite their low sensitivity to the reflection coefficient, it is still possible to extract the knowledge of the viscous and thermal characteristic lengths, allowing the simultaneous determination of all the physical parameters involved in the expression of the reflection operator. To further constrain the problem and guide the inference, the knowledge of a particular incident angle is used at one's advantage in order to more precisely define the thermal length, by effectively yielding a statistical relationship between tortuosity and characteristic length ratio.
For the past couple of years, Plug-in Hybrid Electric Vehicles (PHEVs) demonstrated their ability to significantly reduce petroleum consumptions. However, more than any other vehicle powertrain, their benefits are dependent on the driving cycles from both an aggressiveness and distance point of view. In this paper, two powertrain configurations will be defined. A power split configuration will be used for low battery energy and a series configuration for high battery energy. For each vehicle we will evaluate several control strategies, including electrical dominant and blended, on real world drive cycles. A conventional vehicle will be defined to use as a baseline. The trade-off between fuel displacement and cost will be evaluated for each option.
An acoustic transmissivity method is proposed for measuring flow resistivity of porous materials having rigid frame. Flow resistivity of porous material is defined as the ratio between the pressure difference across a sample and the velocity of flow of air through that sample per unit cube. The proposed method is based on a temporal model of the direct and inverse scattering problem for the diffusion of transient low-frequency waves in a homogeneous isotropic slab of porous material having a rigid frame. The transmission scattering operator for a slab of porous material is derived from the response of the medium to an incident acoustic pulse. The flow resistivity is determined from the solution of the inverse problem. The minimization between experiment and theory is made in the time domain. Tests are performed using industrial plastic foams. Experimental and numerical results, and prospects are discussed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.