A variety of brush-type chiral stationary phases (CSPs) were developed using superficially porous particles (SPPs). Given their high efficiencies and relatively low back pressures, columns containing these particles were particularly advantageous for ultrafast "chiral" separations in the 4-40 s range. Further, they were used in all mobile phase modes and with high flow rates and pressures to separate over 60 pairs of enantiomers. When operating under these conditions, both instrumentation and column packing must be modified or optimized so as not to limit separation performance and quality. Further, frictional heating results in axial thermal gradients of up to 16 °C and radial temperature gradients up to 8 °C, which can produce interesting secondary effects in enantiomeric separations. It is shown that the kinetic behavior of various CSPs can differ from one another as much as they differ from the well-studied C18 reversed phase media. Three additional interesting aspects of this work are (a) the first kinetic evidence of two different chiral recognition mechanisms, (b) a demonstration of increased efficiencies at higher flow rates for specific separations, and

With increasingly efficient columns, eluite peaks are increasingly narrower. To take full advantage of this, choice of the detector response time and the data acquisition rate a.k.a. detector sampling frequency, have become increasingly important. In this work, we revisit the concept of data sampling from the theorem variously attributed to Whittaker, Nyquist, Kotelnikov, and Shannon. Focusing on time scales relevant to the current practice of high performance liquid chromatography (HPLC) and optical absorbance detection (the most commonly used method), even for very narrow simulated peaks Fourier transformation shows that theoretical minimum sampling frequency is still relatively low (<10 Hz). However, this consideration alone may not be adequate for real chromatograms when an appreciable amount of noise is present. Further, depending on the instrument, the manufacturer's choice of a particular data bunching/integration/response time condition may be integrally coupled to the sampling frequency. In any case, the exact nature of signal filtration often occurs in a manner neither transparent to nor controllable by the user. Using fast chromatography on a state-of-the-art column (38,000 plates), we evaluate the responses produced by different present generation instruments, each with their unique black box digital filters. We show that the common wisdom of sampling 20 points per peak can be inadequate for high efficiency columns and that the sampling frequency and response choices do affect the peak shape. If the sampling frequency is too low or response time is too large, the observed peak shapes will not remain as narrow as they really are - this is especially true for high efficiency and high speed separations. It is shown that both sampling frequency and digital filtering affect the retention time, noise amplitude, peak shape and width in a complex fashion. We show how a square-wave driven light emitting diode source can reveal the nature of the embedded filter. We discuss time uncertainties related to the choice of sampling frequency. Finally, we suggest steps to obtain optimum results from a given system.

No abstract

Sub-second liquid chromatography in very short packed beds is demonstrated as a broad proof of concept for chiral, achiral, and HILIC separations of biologically important molecules. Superficially porous particles (SPP, 2.7 μm) of different surface chemistries, namely, teicoplanin, cyclofructan, silica, and quinine, were packed in 0.5-cm-long columns for separating different classes of compounds. Several issues must be addressed to obtain the maximum performance of 0.5 cm columns with reduced plate heights of 2.6 to 3.0. Modified UHPLC hardware can be used to obtain sub-second separations provided extra-column dispersion is minimized and sufficient data acquisition rates are used. Further, hardware improvements will be needed to take full advantage of faster separations. The utility of power transform, which is already employed in certain chromatography detectors, is shown to be advantageous for sub-second chromatography. This approach could prove to be beneficial in fast screening and two-dimensional liquid chromatography.

No abstract