No abstract

No abstract

Recently, homes consume around 40% of world power and produce 21% of the total greenhouse gas emissions. Thus, the proper management of energy in the domestic sector is a vital element for creating a sustainable environment and cost reduction. In this study, an intelligent home energy management system (HEMS) is developed to control domestic appliances load. The motivation of this work is reduced the electricity cost and power consumption from all the appliances by maintaining the customer's high comfort level using an efficient optimized controller. The domestic household appliances such as heating ventilation and air conditioning (HVAC), electric water heater (EWH) and lighting were modelled and analysed using Simulink/Matlab. The developed models analysed the appliances' energy consumption and cost sceneries during peak, off-peak and both peak and off-peak hours. Fuzzy logic controller (FLC) was developed for the HEMS to perform energy utilization estimation and cost analysis during these periods taking the Malaysian tariff for domestic use into consideration. To improve the FLC outcomes and the membership function constraint, particle swarm optimization (PSO) is developed to ensure an optimal cost and power consumption. The results showed that the developed FLC controller minimized the cost and energy consumption for peak period by 19.72% and 20.34%, 26.71% and 26.67%, 37.5% and 33.33% for HVAC, EWH, and dimmable lamps, respectively. To validate the optimal performance, the obtained results shows that the FLC-PSO can control the home appliances more significantly compared to FLC only. In this regard, the FLC-PSO based optimum scheduled controller for the HEMS minimized power and cost by 36.17%-36.54%, 54.54%-55.76%, and 62.5%-58% per day for HVAC, EWH, and light, respectively. In sum, the PSO shows good performance to reduce the cost and power consumption toward efficient HEMS. Thus, the developed fuzzy-based heuristic optimized controller of HEMS is beneficial towards sustainable energy utilization. INDEX TERMS Home energy management, cost of energy, fuzzy logic controller, particle swarm optimization, home appliances, building energy, energy saving.

The lack of control in voltage overshoot, transient response, and steady state error are major issues that are frequently encountered in a grid-connected photovoltaic (PV) system, resulting in poor power quality performance and damages to the overall power system. This paper presents the performance of a control strategy for an inverter in a three-phase grid-connected PV system. The system consists of a PV panel, a boost converter, a DC link, an inverter, and a resistor-inductor (RL) filter and is connected to the utility grid through a voltage source inverter. The main objective of the proposed strategy is to improve the power quality performance of the three-phase grid-connected inverter system by optimising the proportional-integral (PI) controller. Such a strategy aims to reduce the DC link input voltage fluctuation, decrease the harmonics, and stabilise the output current, voltage, frequency, and power flow. The particle swarm optimisation (PSO) technique was implemented to tune the PI controller parameters by minimising the error of the voltage regulator and current controller schemes in the inverter system. The system model and control strategies were implemented using MATLAB/Simulink environment (Version 2020A) Simscape-Power system toolbox. Results show that the proposed strategy outperformed other reported research works with total harmonic distortion (THD) at a grid voltage and current of 0.29% and 2.72%, respectively, and a transient response time of 0.1853s. Compared to conventional systems, the PI controller with PSO-based optimization provides less voltage overshoot by 11.1% while reducing the time to reach equilibrium state by 32.6%. The consideration of additional input parameters and the optimization of input parameters were identified to be the two main factors that contribute to the significant improvements in power quality control. Therefore, the proposed strategy effectively enhances the power quality of the utility grid, and such an enhancement contributes to the efficient and smooth integration of the PV system.

No abstract

No abstract

This work comprehensively demonstrates the performance analysis of Fuzzy Logic Controller (FLC) with Particle Swarm Optimization (PSO) Maximum Power Point Tracker (MPPT) algorithm on a stand-alone Photovoltaic (PV) applications systems. A PV panel, DC-DC Boost converter and resistive load was utilized as PV system. Three different MPPT algorithms were implemented in the converter. The result obtained from the converter was analyzed and compared to find the best algorithm to be used to identify the point in which maximum power can be achieve in a PV system. The objective is to reduce the time taken for the tracking of maximum power point of PV application system and minimize output power oscillation. The simulation was done by using MATLAB/Simulink with DC-DC Boost converter. The result shows that FLC method with PSO has achieved the fastest response time to track MPP and provide minimum oscillation compared to conventional P&O and FLC techniques.

No abstract