RESUMO -As baixas concentrações de espécies de enxofre, compostos indesejáveis, frequentemente encontrados em correntes de gás natural, proporcionam dificuldades na amostragem e a análises destes. Para o desenvolvimento de processos de separação e purificação de gás natural faz-se necessário o conhecimento e/ou aperfeiçoamento de métodos de amostragem e de análise. Com a finalidade de avaliar e discutir estes problemas relacionados à amostragem de compostos sulfurados, utilizou-se um gás natural sintético com nove compostos de enxofre de concentrações conhecidas que foi analisado em cromatografia gasosa e espectrometria de massas através de três diferentes métodos de amostragem usando um detector FID.
Resumo: Com o intuito de suprir a demanda no setor energético mundial, o gás natural ascende como uma alternativa por ser um combustível fóssil menos poluente quando comparado a outros, como o petróleo e o carvão. Para a utilização do gás natural em indústrias e em outros setores como fonte de energia, são por vezes necessários processos de remoção das impurezas presentes em sua composição, como compostos de enxofre, que proporcionam danos em tubulações e catalisadores. Para o desenvolvimento de processos de separação e purificação de gás natural faz-se necessário o conhecimento e/ou aperfeiçoamento de métodos de amostragem e de análise das baixas concentrações de espécies de enxofre, encontrados em correntes de gás natural. Com a finalidade de avaliar e discutir problemas relacionados à amostragem de compostos sulfurados utilizou-se um gás natural sintético com nove compostos de enxofre de concentrações conhecidas, que foi analisado por cromatografia gasosa e espectrometria de massas usando três diferentes métodos de amostragem: injeção direta através de uma válvula de seis vias, injeção indireta, utilizando uma sample bag como recipiente de amostragem e microextração em fase sólida (SPME) seguido por GC-FID. Os diferentes revestimentos, PDMS 100 µm, DVB/PDMS 65 µm e CAR/PDMS 75 µm, foram utilizados a fim de realizar um estudo comparativo da eficiência de cada fibra. Os limites de detecção encontrados para a fibra de CAR/PDMS, em um intervalo entre 0,106 e 1,560 ppt (v/v), demonstrou a superioridade desta em termos de sensibilidade e reprodutibilidade em relação aos outros revestimentos.
ácido nítrico frente a sete compostos de enxofre presentes em uma amostra de gás natural sintetizada foi avaliado. Os dois métodos de modificação melhoraram a capacidade de adsorção. Após a impregnação com ferro, o composto que obteve maior aumento da capacidade de adsorção foi o tercbutilmercaptana (TBM), e com o carbono ativado oxidado pelo HNO3 foi o metiletilsulfeto (DMS). INTRODUÇÃOCom diversas aplicações na indústria e outros setores, o gás natural é uma importante fonte de energia, além de ser a principal matéria-prima em vários segmentos da indústria química. Entretanto, problemas como o envenenamento de catalisadores, corrosão de equipamentos e entre outros, podem advir de compostos organosulfurados presentes na composição desse combustível fóssil (Malvesti et al., 2009).Com a gradativa necessidade de emissões mais limpas por parte dos órgãos ambientais, novas tecnologias tendo em vista à remoção adicional de enxofre mediante processos de adsorção vêm sendo estudadas. Uma técnica promissora, menos complexa e de alta eficiência, porém o adsorvente utilizado necessita ter elevada área superficial e propriedades texturais que contribuam no desempenho cinético e de equilíbrio de adsorção (Ruthven,1984). O carbono ativado é um dos principais adsorventes empregados em processos adsortivos devido a sua estrutura de poros bem desenvolvida, área superficial e dos grupos funcionais em sua superfície (Cooney, 1999).Estudos recentes analisam métodos de modificação para adaptar e alterar propriedades físicas e químicas na superfície do carbono ativado. Segundo Cui e colaboradores (2008), resultados superiores são obtidos provenientes da modificação de adsorventes. Quer por oxidação, geralmente com um ácido forte, sulfúrico ou nítrico ou por impregnação com cloreto de ferro III. Tais alterações adicionam mais grupos ácidos à superfície e formam locais de adsorção ativos na superfície do carbono, respectivamente, favorecendo reações de oxidação/adsorção.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.