No abstract

If thoracic attenuation of a porto-azygos shunt is considered, a transdiaphragmatic approach exposes the insertion site for shunt attenuation. This approach is straightforward, without unnecessary abdominal organ manipulation, and since attenuates at the insertion, avoids missing additional contributing branches.

Wood anatomical features may be visible on the microscopic as well as on the macroscopic scale. While the former can often be quantified by detailed wood anatomical analyses, the latter are often treated as qualitative features or as binary variables (present/absent). Macroscopic tree-ring features can be quantified in terms of frequency, intensity, or classified according to their position within a tree ring, like intra-annual density variations (IADFs) in conifers or frost rings in earlywood or latewood. Although some of these tree-ring features, like e.g. missing rings or IADFs are often seen as anomalies, hampering dendrochronologists to perform proper crossdating of tree-ring series, many of these properties are formed under extreme environmental stress or heavy impact, and could mark these extreme events by the manifestation in the wood anatomical structures throughout the lifespan of trees. The described tree-ring features form discrete time-series of extreme events. For example, flood rings may be marked by lunar-shaped earlywood vessels or enlarged latewood vessels in ring-porous oaks. White earlywood rings and light rings indicate reduced cell wall thickness and lignification occurring in very cold years. Frost rings result from cambial cell death during abrupt cooling events in the growing season. Missing rings and IADFs are mainly caused by drought events. Characteristic variations in earlywood vessel size, shape, or number in ring-porous oak species are markers for flood events, defoliation, heat stress, or drought. Traumatic resin ducts may be triggered by a range of biotic or environmental stressors, including wounding, fires or mechanical factors. Reaction wood is indicative of mechanical stress, often related to geomorphic events. In many cases anatomical responses are unspecific and may be caused by different stressors or extreme events. Additionally, the sensitivity of trees to form such features may vary between species, or between life stages within one species. We critically evaluate the indicative value of different wood anatomical tree-ring features for environmental reconstructions.

38This is an Open Access version of the article: Jacob, M., Annys, S., Frankl, A., De Ridder, M., Beeckman, H., Guyassa, E., Nyssen, J., 2015. Tree line dynamics in the tropical African highlands -identifying drivers and dynamics.

Mangroves occur along the coastlines throughout the tropics and sub-tropics, supporting a wide variety of resources and services. In order to understand the responses of future climate change on this ecosystem, we need to know how mangrove species have responded to climate changes in the recent past. This study aims at exploring the climatic influences on the radial growth of Heritiera fomes from a local to global scale. A total of 40 stem discs were collected at breast height position from two different zones with contrasting salinity in the Sundarbans, Bangladesh. All specimens showed distinct tree rings and most of the trees (70%) could be visually and statistically crossdated. Successful crossdating enabled the development of two zone-specific chronologies. The mean radial increment was significantly higher at low salinity (eastern) zone compared to higher salinity (western) zone. The two zone-specific chronologies synchronized significantly, allowing for the construction of a regional chronology. The annual and monsoon precipitation mainly influence the tree growth of H. fomes. The growth response to local precipitation is similar in both zones except June and November in the western zone, while the significant influence is lacking. The large-scale climatic drivers such as sea surface temperature (SST) of equatorial Pacific and Indian Ocean as well as the El Niño-Southern Oscillation (ENSO) revealed no teleconnection with tree growth. The tree rings of this species are thus an indicator for monsoon precipitation variations in Bangladesh. The wider distribution of this species from the South to South East Asian coast presents an outstanding opportunity for developing a large-scale tree-ring network of mangroves.

The phenomenon of distinct, absent or indistinct growth rings is a highly variable feature used for wood identification and a wide range of tree-ring studies. Causes for its variability are not yet fully understood. There is also a lack of consensus within the scientific community about how distinct and indistinct tree rings should be defined and classified. We use a selection of 103 Central African rainforest trees to analyse the anatomy of growth-ring boundaries of 103 Central African rainforest species and assessed the influence of the climate, tree organ and leaf shedding behaviour on growth-ring distinctness and anatomy. We observed a high variability of tree-ring boundaries anatomy and distinctness within and among individuals and species. Although, for some semi-deciduous species, higher incidence of distinct growth rings appears to be related with a more pronounced seasonal climate, no general trends are observed for the assembly of studied species. Growth rings are variable within individuals depending on the considered organ: trunks tend to show more distinct rings than branches. Growth-ring distinctness is difficult to implement as a trait to measure tree performance when only based on abrupt changes in fibre size and cell wall thickness. From the potential growth-ring markers identified in the IAWA list of hardwood features, those applying to vessel and parenchyma density and distended rays appear to be more useful in tropical trees than abruptly flattened latewood fibres or abrupt changes in vessel diameter.

Key message: Pattern recognition has become an important tool to aid in the identification and classification of timber species. In this context, the focus of this work is the classification of wood species using texture characteristics of transverse cross-section images obtained by microscopy. The results show that this approach is robust and promising. Context: Considering the lack of automated methods for wood species classification, machine vision based on pattern recognition might offer a feasible and attractive solution because it is less dependent on expert knowledge, while existing databases containing high-quality microscopy images can be exploited. Aims: This work focuses on the automated classification of 1221 micro-images originating from 77 commercial timber species from the Democratic Republic of Congo. Methods: Microscopic images of transverse cross-sections of all wood species are taken in a standardized way using a magnification of 25x. The images are represented as texture feature vectors extracted using local phase quantization or local binary patterns and classified by a nearest neighbor classifier according to a triplet of labels ( species, genus, family). Results: The classification combining both local phase quantization and linear discriminant analysis results in an average success rate of approximately 88% at species level, 89% at genus level and 90% at family level. The success rate of the classification method is remarkably high. More than 50% of the species are never misclassified or only once. The success rate is increasing from the species, over the genus to the family level. Quite often, pattern recognition results can be explained anatomically. Species with a high success rate show diagnostic features in the images used, whereas species with a low success rate often have distinctive anatomical features at other microscopic magnifications or orientations than those used in our approach. Conclusion: This work demonstrates the potential of a semi-automated classification by resorting to pattern recognition. Semi-automated systems like this could become valuable tools complementing conventional wood identification

High-resolution X-ray computed tomography is a promising technique for research on wood cores and will be explored further on other temperate and tropical species. Further study on limba noir is necessary to reveal the causes of density variations and to determine how resistance drillings can be further refined.