RESUMO -O Brasil gera aproximadamente 350 milhões de toneladas de resíduos lignocelulósicos por ano, entre estes estão o bagaço e a palha de cana-de-açúcar. Atualmente a queima do bagaço de cana de açúcar nas caldeiras das indústrias é um processo bem sucedido que torna as usinas autosuficientes em geração de energia, porém tais resíduos podem ser utilizados na produção de etanol. O objetivo deste trabalho foi investigar a produção de etanol 2G a partir do bagaço e palha de cana de açúcar, estudando a eficiência de diferentes tipos de pré-tratamentos: com ácido sulfúrico (H 2 SO 4 ), com hidróxido de sódio (NaOH), orgânico e peróxido de hidrogênio (H 2 O 2 ) em meio básico. Portanto, a partir dos resultados obtidos que entre os pré-tratamentos do bagaço da cana-de-açúcar tanto o realizado com peróxido de hidrogênio, como o realizado com ácido sulfúrico tiveram um rendimento razoável de 60%, enquanto que o pré-tratamento orgânico da palha da cana-de-açúcar foi o mais promissor, com rendimento de 85%. INTRODUÇÃOO bagaço é um subproduto, remanescente da moagem dos colmos da cana-de-açúcar. É obtido na saída do último moinho das usinas e destilarias, e constitui um conjunto de partículas de diferentes tamanhos, que oscilam entre 1 e 25 mm, apresentando um tamanho médio de 20 mm, o qual depende fundamentalmente do número de moagens realizadas e do tamanho dos equipamentos. A morfologia do bagaço se encontra relacionada com a estrutura da cana, onde se encontram fibras exteriores do colmo ou da casca, feixes fibrovasculares e outras formas fibrosas que dão resistência ao colmo vegetal. (MACHADO, 2009) A celulose é a matéria prima mais abundante e está presente na estrutura básica das células de todas as plantas. Ela é um polímero linear e pertence à função química dos hidratos, mais corretamente a dos glicídios. As moléculas de celulose tendem a formar pontes de hidrogênio intramoleculares (entre unidades de glicose da mesma molécula) e intermoleculares (entre as unidades de glicose de moléculas adjacentes). O primeiro tipo de interação é responsável por certa rigidez das cadeias unitárias, e o segundo pela formação da fibra vegetal (NASCIMENTO, 2007).
RESUMO -A grande dependência de fontes de energia não renováveis e poluentes, tem levado a busca de novas rotas para produção de etanol combustível a partir de biomassas residuais de composição lignocelulósica, como por exemplo, palha e sabugo do milho. O objetivo do trabalho foi estudar a influência das condições de hidrólise enzimática na conversão dos açúcares presentes nos resíduos do milho. Inicialmente foi feito o pré-tratamento com H 2 SO 4 , visando à remoção da lignina, hemicelulose e extrativos. Em seguida, foram realizados ensaios de hidrólises enzimáticas, com 16,7 g ⁄ L de substrato, utilizando 1,0 e 2,0 mL da enzima comercial celulase de Aspergillus niger, em tampão acetato com pH 4,5. As amostras foram colocadas em mesa incubadora rotativa, tipo Shaker, à 50ºC durante 48 horas e 72 horas, logo em seguida foi realiza analise dos açúcares redutores (AR) e açúcares redutores totais (ART) para cada ensaio. A melhor condição encontrada para os dois resíduos foi 48 horas de hidrólise e 1,0 mL da enzima comercial, obtendo-se 0,14g de AR ⁄ g de palha hidrolisada e 0,07g de AR por g de sabugo. INTRODUÇÃOO crescimento exacerbado da população e a exploração indiscriminada dos recursos naturais tendem ao seu esgotamento. A busca de novas matrizes energéticas renováveis em substituição aos combustíveis fósseis tem sido importante, visto que, além de serem abundantes, como a celulose, apresentam baixo impacto ambiental. O desenvolvimento agrícola tem resultado no crescimento da quantidade de resíduos que muitas vezes se acumulam tornando-se problema ambiental. O Brasil, por exemplo, produziu em 2007 aproximadamente 400 milhões de toneladas de subprodutos agroflorestais, incluindo os resíduos gerados na indústria de celulose (NUNES et al., 2001), podendo ser utilizado como matéria-prima na obtenção de energia renovável, como a produção de bioetanol.O etanol é utilizado como combustível, em grande escala no Brasil, Estados Unidos e em alguns países europeus. Por promover maior calor de vaporização e deter elevada octanagem, pode ser misturado aos derivados do petróleo, como a gasolina ou usado puro em motores específicos, além de ser um excelente combustível para motores híbridos. Quase todo etanol combustível é produzido por fermentação de sacarose no Brasil ou glicose de milho nos Estados Área temática: Processos Biotecnológicos 1
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.