The present work was done to improve the impact property of isotactic polypropylene (PP), especially at low temperatures, by incorporating ethylene propylene diene monomers (EPDM). This was done by ensuring compatibility between the two polymers with phase modifiers polyethylene grafted with maleic anhydride (PE-g-MA) and initiator dicumyl peroxide (DCP). In addition, attempts were also made to understand the fundamentals of impact toughening as well as fracture toughness, and to correlate the results with that of morphological evidences obtained from scanning electron microscopy (SEM) and X-ray diffraction (XRD) methods. Varying the ratios of all blend composition, mechanical properties were studied. It was observed that as the rubber fraction increased, the impact property as well as fracture toughness increased. All these tests also showed promising results when PE-g-MA was added, leading to more improvement in all the mechanical properties including increase in crystallite size. It had shown plasticization effect on the compositions, which could be further confirmed by differential scanning calorimetry (DSC) compared to the uncompatibilized ones. But when DCP was added, it behaved like an initiator which directly reacted with the PP matrix, decreasing the molecular weight of the blend with decreasing size of the crystallites.
Recycling of thermoplastic elastomers based on poly (phenylene ether) (PPE) was studied in detail. The quaternary blend comprising of styrene-ethylene-butylene-styrene (SEBS)/ethylene vinyl acetate (EVA)/PPE-PS (polystyrene) showed improvement in mechanical properties upon recycling, which was correlated with the formation of crosslinked network in the system. Presence of crosslinked network was confirmed by the gel content analysis. The blend components involved in the crosslinking were evaluated by gel morphology analysis. Fourier transform infrared spectroscopy revealed the chemical composition of the crosslinked gel. Crosslinking mechanism was established based on the reactivity of allylic EVA radical during recycling. Rheological study supported the notion of crosslinking upon recycling that resulted in higher storage modulus (G 0 ) as a manifestation of restrained flow by network formation. On the basis of the earlier data, a reaction mechanism for crosslinking was proposed. Finally, structure-property correlation was developed through morphological, chemical, and rheological analysis to understand the anomalous enhancement in mechanical properties upon recycling. POLYM. ENG. SCI., 48:496-504, 2008. ª
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.