The pyrolysis of waste tire has been proposed as an alternative route to its recycling producing residual oils that can be used as fuels. In this work, a physicochemical process to obtain carbonbased dots (CBD) from carbon black (CB L) derivatives of tires is described. For this, the CB L was treated with different acids to produce CB L1 and CB L2 particles suspension. The pH of the suspension was adjusted to 5.6 to precipitate remaining impurities. Afterwards, the supernatant was ultra-centrifuged and the yellow pale solid, the purified CBD obtained by roto evaporation, was characterized by ultraviolet-visible spectrophotometer (UV-Vis), photoluminescence (PL) at 320-380 nm, high-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), energy-dispersive X-ray spectroscopy (EDX), Fourier transform infrared microscopy (µFTIR), and X-ray photoelectron spectroscopy (XPS). This material showed the typical excitation wavelength dependent emission and a PL quantum yield of 19.29% and was constituted by a well-defined spherical shaped and single sheets of "graphene quantum dots" with undefined shape, with potential applications in optoelectronic and fluorescence imaging devices.
Entre os termofixos existentes no mercado, encontra-se o polietileno reticulado (PEX), que é utilizado no encapsulamento de fios de alta tensão. Nesse processo, uma grande quantidade de resíduos é gerada e descartada, onerando a produção e prejudicando o meio ambiente. Desse modo, este trabalho propôs a modificação química do PEX por meio de reações de sulfonação, que consistem na introdução de grupos SO3H em sua estrutura. Estudou-se a influência da pré-irradiação em micro-ondas, do tempo de reação e da concentração de SO3 livre no ácido sulfúrico fumegante por FTIR-ATR, DRX e ICP. Pelos resultados obtidos verificou-se que PEX-SO3H pode ser classificado como uma resina fortemente catiônica. Os melhores resultados foram obtidos com 30 minutos de reação e 65% de SO3 livre sem pré-irradiação em micro-ondas. Apesar da avaliação econômica não ter sido satisfatória, esse estudo abre novas possibilidades para a reciclagem de termofixos.Entre os termofixos existentes no mercado, encontra-se o polietileno reticulado (PEX), que é utilizado no encapsulamento de fios de alta tensão. Nesse processo, uma grande quantidade de resíduos é gerada e descartada, onerando a produção e prejudicando o meio ambiente. Desse modo, este trabalho propôs a modificação química do PEX por meio de reações de sulfonação, que consistem na introdução de grupos SO3H em sua estrutura. Estudou-se a influência da pré-irradiação em micro-ondas, do tempo de reação e da concentração de SO3 livre no ácido sulfúrico fumegante por FTIR-ATR, DRX e ICP. Pelos resultados obtidos verificou-se que PEX-SO3H pode ser classificado como uma resina fortemente catiônica. Os melhores resultados foram obtidos com 30 minutos de reação e 65% de SO3 livre sem pré-irradiação em micro-ondas. Apesar da avaliação econômica não ter sido satisfatória, esse estudo abre novas possibilidades para a reciclagem de termofixos
Investigations regarding alternative methods for producing polymeric materials with hydrophilic properties have increased considerably. In this context, polymeric biomaterials with hemocompatible surface properties have been successfully obtained by grafting hydrophilic monomers onto commercial polymer films by simultaneous irradiation processes. In this study, simultaneous irradiation and grafting were used to produce a copolymer PVC-co-DMAEMA-co-heparin with hemocompatible surface properties. Characterization by FTIR of the graft copolymer indicates that the increase in monomer grafting levels inhibits the bonding sites to heparin. FTIR-PAS analyses of the graft copolymers showed that the highest graft levels were obtained for the irradiated samples containing 45% of monomer. Heparin, however, could only be detected in the irradiated samples containing 30% of DMAEMA. The analysis of the micrographs, on the other hand, showed that increasing the monomer concentration enhances surface roughness of the graft copolymers. Roughness however decreased with heparin addition. It was possible to verify that an excess of surface roughness of the graft copolymers inhibits anticoagulant properties of heparin, triggering thrombus formation. Platelet adhesion, on its turn, was not significantly affected by the presence of heparin when PVC-co-DMAEMA and PVC-co-DMAEMA-co-heparin, obtained from the systems containing 45% of monomer, are compared. The addition of heparin in the systems containing 30% of DMAEMA resulted in fewer thrombogenic surfaces.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.