High consumption of freshwater and natural aggregate in concrete production becomes a matter of some concern that has been discussed recent years. An alternative partially or totally replacement for both materials is significant issue to reduce the negative impacts on the environment. Therefore, the aim of this research is to observe explicitly the effect of using seawater as mixing combined with recycled coarse aggregate and other material to make new recycled aggregate concrete (RAC) under compressive load. The experimental laboratory test was conducted to total of thirty cylinders specimens of two to groups of mix design with w/c of 0.45. First was three types of percentage level of recycled coarse aggregate with targeted compressive strength of 25 MPa. The second was two types of mixtures and totally replaced by recycled coarse aggregate with targeted compressive strength of 30 MPa. Some specimens were mixed by seawater and all were placed in the freshwater-curing during some definite period of 7 and 28 days. The results show that the seawater and recycle aggregate were not significant influence to reduce the compression strength for first mix category, while the second mix category was having great influence up to 22% at 28 days. The reduction in compressive strength increases with an increase the targeted compressive load.
Sumber utama pasir berasal dari sungai atau daerah pantai yang memiliki karakteristik yang berbeda-beda, baik kekuatan tekan maupun tampak warna fisiknya. Perlu diketahui perbandingan sifat kekuatan material mortar dengan menggunakan campuran pasir putih (CPP) dan biasa (CPB) sungai masamba dan korelasi keduanya. Penelitian ini dilakukan dengan metode eksperimen laboratorium pada 72 benda uji berbentuk kubus dengan ukuran 15 x 10 x 15 cm yang dibentuk secara manual sesuai proses pembuatannya di lapangan. Benda uji diletakkan di area terbuka untuk proses pengeringan selama variasi waktu 7, 14, 21, 28 hari. Tiga kategori campuran benda uji dibuat yaitu 1PC : 3PS (A), 1PC: 4PS (B), dan 1PC : 5PS (C) pasir untuk dua jenis pasir dengan Faktor Air Semen (FAS) 0.45. Nilai rata-rata hasil pengujian terdiri dari 3 buah sampel uji dari pengujian menggunakan mesin uji kuat tekan. Mutu rencana penelitian ini merujuk pada SNI 03-0349-1989 tentang kategori bata beton untuk pasangan dinding. Hasil pengujian kuat tekan memperlihatkan bahwa kuat tekan bata beton untuk material CPP mencapai maksimum 28 hari pada campuran A dengan nilai sebesar 151.77 kg/cm² sedangkan material CPB pada campuran A dengan nilai 161.10 kg/cm². Korelasi kedua material CPP dan CPB menggambarkan relasi tinggi sebesar R²=0.9738 pada campuran A
Tujuan penelitian ini adalah untuk menginvestigasi kekuatan tekan beton agregat recycle (BAR) terhadap pengaruh rendaman air laut. Total tiga puluh benda uji beton berbentuk silinder dengan ukuran (f150 x 300 mm) diproduksi dari dua jenis campuran yang berbeda. Jenis pertama beton agregat normal (BAN) adalah beton normal terdiri atas campuran semen portland, normal agregat kasar (NAK), pasir sungai dan air tawar. Adapun jens kedua (BAR) adalah beton recycle aggregate yang terdiri dari campuran semen Portland, recycle agregat kasar (RAK), pasir sungai dan air tawar. Adapun rencana target kuat tekan beton benda uji adalah sebesar 250 kg/cm2 dengan nilai faktor air semen (fas) sebesar 0.45. Benda uji yang telah dibentuk kemudian dilakukan proses perendaman air laut secara langsung mulai umur 3, 7, 14, 21, dan 28 hari. Tiba saat waktu pengujian, benda uji dikeluarkan dari tempat perawatan dan selanjutnya diangin-anginkan untuk beberapa saat hingga material mengalami kering permukaan. Selanjutnya, pengujian kuat tekan dilakukan dengan menggunakan mesin kompresi tes sesuai prosedur SNI 1947:2011. Hasil pengujian memperlihatkan bahwa Pengaruh rendaman air laut tidak signifikan menurunkan kuat tekan beton BAR setelah membandingkan nilai kuat tekan beton BAN yang melampaui rencana mutu beton.
AbstrakKorosi elemen-elemen strukuktur jembatan baja karena terekspose ke lingkungan menjadi salah satu masalah serius di seluruh dunia hari ini. Oleh karena itu, tujuan penelitian ini adalah untuk mengevaluasi sisa kapasitas kekuatan korosi pelat baja yang terlihat pada bagian struktur jembatan baja yang mengalami beban tekuk dengan analisis eksperimen laboratorium dan komputasi. Spesimen uji diperoleh dari potongan gelagar jembatan yang telah mengalami korosi karena adanya reaksi kimia dengan lingkungan sekitarnya selama bertahun-tahun dan mereduksi ketebalannya serta membentuk permukaannya menjadi ireguler. Kemudian dibentuk sesuai standar spesimen pengujian Japanese Industrial Standard (JIS No.5, 1995). Sistem scanning 2D juga telah dilakukan pada spesimen uji dengan tujuan memperoleh data grid sumbu x dan y dalam membentuk Finite Elemen Models (FEM). Hasil pengujian yang telah dilakukan dapat disimpulkan bahwa korosi yang terjadi pada pelat baja dapat menurunkan kemampuannya dalam memikul beban tekuk. Juga dipelajari efek dari beberapa parameter yaitu tebal minimum pelat (t min ), permukaan ireguler pelat dan eksentrisitasnya terhadap perilaku tekuk korosi pelat baja. Kemudian, suatu rumusan baru dibuat yang dapat dipergunakan dalam menentukan dan mengevaluasi sisa kekuatan tekuk korosi pelat baja baik tanpa maupun dengan adanya pengaruh eksentrisitasnya.Kata-kata Kunci: Korosi pelat baja, permukaan ireguler, beban tekuk, metode eksperimen, FEA. AbstractCorrosion of structural steel bridge elements due to eksposed to the environment becomes a serious problem in the world today. Therefore, the aim of this research is to evaluate the residual strength of corroded steel plates which are seen in the steel bridge structure elements under buckling load by experimental laboratory and computational analyses. Specimen tests are obtained from a part of the girder bridge that has been corroded due to chemical reactions with it's around environment for years and reduced its thickness through become the irregular surfaces. They were then fabricated based on standard of test specimen of Japanese Industrial Standard (JIS No.5, 1995). 2D scanning system was condacted to specimen test in order to obtain the grid data x and y coordinates to form Finite Element Model (FEM). The test results reveal that corrosion on steel plates is able to reduce the bearing capacity under buckling load. Also effect of some parameter studies such as minimum thickness (t min ), irregular surfaces and the amount of eccentricity to buckling behavior of corroded steel plates was studied here. Then, a new proposal formula is developed that able to be used for deciding and evaluating the residual buckling load of corroded steel plates with or without the effect of an amount of eccentricity.
Tujuan penelitian ini adalah untuk mengevaluasi sisa kapasitas kekuatan korosi pelat baja yang terlihat pada bagian struktur baja yang mengalami beban tekuk agar tetap pada kondisi layak digunakan, hingga perlu pebaikan atau rekonstruksi pada waktu yang tepat. Pelat baja ini diperoleh dari potongan girder jembatan yang mengalami korosi karena adanya reaksi kimia dengan lingkungan sekitarnya selama bertahun-tahun dan mereduksi ketebalannya serta membentuk permukaannya menjadi irreguler. Kemudian, spesimen uji tersebut dibentuk sesuai standar specimen pengujian Japanese Industrial Standard JIS No. 5 dan dianalisis secara eksperimen untuk mengevaluasi sisa kapasitas kekuatannya. Parameter yang diperhitungkan pada pengujian ini yaitu nilai ketebalan minimum, permukaan irregular korosi baja dan eksentrisitasnya. Dari hasil pengujian korosi pelat baja yang mengalami beban tekuk kompresi ini dapat disimpulkan bahwa konfigurasi permukaan dan eksentrisitasnya menurunkan kemampuan korosipelat baja dalam memikul beban.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.