RESUMO A incorporação de resíduos de construção e demolição (RCD) como agregados em concretos requer bom conhecimento das propriedades dos materiais envolvidos. O objetivo da presente pesquisa foi caracterizar um produto específico de uma usina de reciclagem de RCD, a Usina de Recicláveis Sólidos Paraná (USIPAR), localizada em Almirante Tamandaré, PR, conhecido comercialmente como bica corrida. O agregado reciclado foi caracterizado quanto à sua granulometria e demais características físicas. A fração miúda do agregado reciclado foi escolhida para substituir o agregado natural. Demais características desta fração foram estudadas, como teor de material pulverulento, massa específica e absorção de água. Foram produzidos concretos com diferentes taxas de substituição (0%, 25%, 50%) de agregado natural por agregado reciclado. As propriedades do concreto foram então avaliadas e verificou-se que o aumento do teor de substituição de agregado natural por agregado reciclado reduziu a trabalhabilidade, a massa específica seca e saturada do concreto e o módulo de elasticidade, bem como aumentou a absorção e o índice de vazios. A massa específica real do concreto não foi influenciada pelo teor de substituição. Com relação às resistências à compressão e à tração, a substituição de agregado natural pelo agregado reciclado levou a um decréscimo na resistência do concreto. O concreto com 50% de teor de substituição obteve uma maior resistência à compressão axial que o concreto com teor de substituição de 25%, e mesma resistência à tração por compressão diametral que o concreto controle.
Current building management standards demand that construction waste management occurs in the planning phase. This paper presents the development of a plug-in as a BIM tool to predict waste generation. As a research strategy, the plug-in was applied to a single-family housing project, the respective construction wastes were predicted in the BIM technology and compared to the literature. Through waste generation indexes, some planning indicators were calculated. The identified wastes were automatically classified, and a management structure was designed. The study showed that the best results are obtained when the construction waste is estimated from Actual Built Volume instead of Apparent Constructed Volume like the traditional models uses. In conclusion, adopting a plug-in do predict construction waste has proved to be advantageous. A specific advantage of the proposed method is that the plug-in user may adopt their waste generation indexes according to the regional and the production team aspects. The adoption of a plug-in made the acquisition and processing of data fast and versatile.
A determinação de esforços axiais e deslocamentos são indispensáveis para a análise e a compreensão de uma treliça. Para tais determinações, há uma constante busca de métodos que possam facilitar e agilizar os cálculos. Através do Método dos Elementos Finitos (MEF), o presente artigo propõe um modelo de planilha eletrônica, desenvolvida no Microsoft Excel®, capaz de calcular os esforços das barras que constituem a treliça plana, bem como os deslocamentos nodais, quando sujeito a forças e restrições de deslocamentos. Afim de não somente apresentar números, de modo didático, o modelo também demonstra graficamente os resultados obtidos utilizando o Visual Basic for Applications (VBA), que é a linguagem de programação do Microsoft Excel®, para ilustrar a estrutura antes e depois da aplicação das forças mostrando os esforços de tração e compressão nas barras e o deslocamento dos nós. O uso da programação no Microsoft Excel® além da facilitar os cálculos, também se faz importante didaticamente, visto que é uma ferramenta capaz de confirmar os resultados que são obtidos via métodos tradicionais, comum nas graduações de engenharia civil e devido a sua fácil curva de aprendizado e a alta disponibilidade do software.
Waste generation is one of the most relevant environmental aspects of the construction industry. About 47 million tons of construction and demolition waste are collected annually by Brazilian municipalities. One of the activities that generates waste is cutting chases on walls for installations. However, there are no waste generation indicators for this activity. Understanding waste generation processes enables managers to prevent them and promote their proper environmental management. This study assessed the generation of waste resulting from the cutting of clay bricks for electrical installations using three tools: milling cutter, marble saw, and cold chisel. The study included data collected from residential construction works and experimental data collected from the construction of real-scale walls. In a laboratory, five different wall configurations were built and the three tools mentioned were used to cut a chase on the walls. The results were statistically analyzed to define a waste generation index (WGI) by linear regression. The type of tool employed had no influence on the waste generation index, which was 26.5 ± 2.6 kg/m2. However, the tools used directly influenced the quality of the service, productivity, and the volume of waste generated. The waste from the milling cutter showed the smallest maximum aggregate size and the largest bulk density, followed by the waste resulting from the marble saw and the cold chisel. The marble saw and cold chisel waste samples had around 78% of their composition in the coarse aggregate grain size range. The milling cutter waste samples were the finest and had on average 60% of their composition in the fine aggregate grain size range. The width of the chases made with the milling cutter were smaller and more consistent than those made with the cold chisel, which showed irregularities and larger dimensions than necessary. From the waste generation indicators obtained in this study, construction managers will be able to choose more appropriate cutting tools and improve their planning and management systems to minimize associated environmental impacts.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.