Highly flexible porous carbon nanofibers (P-CNFs) were fabricated by electrospining technique combining with metal ion-assistant acid corrosion process. The resultant fibers display high conductivity and outstanding mechanical flexibility, whereas little change in their resistance can be observed under repeatedly bending, even to 180°. Further results indicate that the improved flexibility of P-CNFs can be due to the high graphitization degree caused by Co ions. In view of electrode materials for high-performance supercapacitors, this type of porous nanostructure and high graphitization degree could synergistically facilitate the electrolyte ion diffusion and electron transportation. In the three electrodes testing system, the resultant P-CNFs electrodes can exhibit a specific capacitance of 104.5 F g(-1) (0.2 A g(-1)), high rate capability (remain 56.5% at 10 A g(-1)), and capacitance retention of ∼94% after 2000 cycles. Furthermore, the assembled symmetric supercapacitors showed a high flexibility and can deliver an energy density of 3.22 Wh kg(-1) at power density of 600 W kg(-1). This work might open a way to improve the mechanical properties of carbon fibers and suggests that this type of freestanding P-CNFs be used as effective electrode materials for flexible all-carbon supercapacitors.

The work describes the mechanical performance of a metal rubber particles (MRP) damper design based on an auxetic (negative Poisson's ratio) cellular configuration. The auxetic damper configuration is constituted by an anti-tetrachiral honeycomb, where the cylinders are filled with the MRP material. The MRP samples have been subjected to quasi-static loading to measure the stiffness and loss factor from the static hysteresis curve. A parametric experimental analysis has been carried out to investigate the effect of relative density and filling percentage on the static performance of the MRP, and to identify design guidelines for best use of MRP devices. An experimental assessment of the integrated auxetic-MRP damper concept has been provided through static and dynamic force response techniques.

No abstract

Flue-cured tobacco (Nicotiana tabacum L.) is a major cash crop in Yunnan, China, and the yield, chemical components, and their proportions decide the quality of tobacco leaves. To understand the effects of environmental factors (soil and climatic factors) on the yield and quality of flue-cured tobacco and determine the main regulating factors, we selected three flue-cured tobacco cultivars [K326, Yunyan87 (Yun87), and Honghuadajinyuan (Hongda)] grown in the Honghe Tobacco Zone. Indices related to yield and economic traits, chemical component properties, soil physical and chemical properties, and climatic factors at different planting sites, were evaluated. We used variance analysis, correlation analysis, and redundancy analysis (RDA) in this study. The results showed that the yield and chemical component properties of flue-cured tobacco, except for the number of left leaves and plant total sugar (PTS) content, were significantly correlated with climatic factors. Particularly, the yield increased in drier and sunnier weather. In terms of the carbon supply capacity, PTS, petroleum ether (PPE), and starch contents (PS) were higher under high-altitude and high-latitude climatic conditions, whereas for the nitrogen supply capacity, plant nitrogen (PTN) and nicotine (PN) contents improved under low-altitude and low-latitude climatic conditions. PTS, reducing sugar (PRS), potassium (PTK), chlorine (PCL), and PPE contents were negatively related to soil clay content, soil pH, and soil organic matter, whereas PRS and PTK contents were positively correlated with alkali-hydrolyzed nitrogen (AN). According to RDA, the soil clay, AN, available phosphorus (AP), and soil chlorine content (SCL) strongly affected the quality of flue-cured tobacco. The quality of the K326 and Yun87 cultivars was mostly influenced by moisture, whereas the quality of the Hongda cultivar was mostly affected by temperature. In conclusion, compared with soil properties, climatic factors more significantly affect the yield and quality of Honghe flue-cured tobacco leaves.

DCH (2,3-dicyanohydroquinone), a fluorescent dye, was reported as a novel and powerful (+) MALDI matrix for lipid tissue imaging.