Tin perovskites have emerged as promising alternatives to toxic lead perovskites in next-generation photovoltaics, but their poor environmental stability remains an obstacle towards more competitive performances. Therefore, a full understanding of their decomposition processes is needed to address these stability issues. Herein, we elucidate the degradation mechanism of 2D/3D tin perovskite films based on (PEA)0.2(FA)0.8SnI3 (where PEA is phenylethylammonium and FA is formamidinium). We show that SnI4, a product of the oxygen-induced degradation of tin perovskite, quickly evolves into iodine via the combined action of moisture and oxygen. We identify iodine as a highly aggressive species that can further oxidise the perovskite to more SnI4, establishing a cyclic degradation mechanism. Perovskite stability is then observed to strongly depend on the hole transport layer chosen as the substrate, which is exploited to tackle film degradation. These key insights will enable the future design and optimisation of stable tin-based perovskite optoelectronics.

Hybrid organic lead trihalide perovskites continue to generate significant interest for use in optoelectronic devices such as solar cells and light-emitting devices. However, the toxicity of lead is considered one of the main obstacles to the commercialization of this technology. Although challenging, the replacement of lead by tin is currently the most promising alternative. Herein, we explore a class of low-dimensional, lead-free perovskite materials (2D (PEA)2SnI x Br4–x , where PEA ≡ C6H5CH2CH2NH3 +) with tunable optical properties in the visible region of the spectrum. Specifically, we show that 2D (PEA)2SnI4 perovskite exhibits superior photoluminescence properties to conventional 3D CH3NH3SnI3 and that (PEA)2SnI4 can act as a sensitizer on mesoporous TiO2. We go on to demonstrate visible (∼630 nm) electroluminescence from a device employing a (PEA)2SnI4 emitter sandwiched between ITO/PEDOT:PSS and F8/LiF/Al as hole and electron injection electrodes, respectively. These devices reach a luminance of 0.15 cd/m2 at 4.7 mA/cm2 and an efficacy of 0.029 cd/A at 3.6 V. This proof-of-principle device indicates a viable path to low-dimensional, lead-free perovskite optoelectronics.

The field of photovoltaic research has been lately dominated by the rapid evolution of low-cost and high-efficiency hybrid organic lead halide perovskite solar cells. Despite the considerable progress made in the efficiency of such devices, the achievement of long-term material and device stability remains a challenge. In this Perspective, insights into the role structural defects play in the stability of these perovskite absorbers are examined, highlighting the critical importance of vacancy type defects as the initiation sites for moisture-, oxygen-, and light-induced degradation and the approaches that are emerging to help overcome these issues. In the second part of the Perspective we consider the stability of tin-based perovskites. Here, the Sn 4+ defects that arise upon material degradation are described along with the strategies being developed to enhance stability and decrease their formation. Finally, the discussion is extended to innately more stable layered tin-based perovskites, identifying them as a route to the development of efficient lead-free perovskite solar cells.

Based on our experience on controlling the recombination kinetics in Dye Sensitized Solar Cells (DSSC) through the modification of the mesoporous

Phosphorene nanoribbons (PNRs) have been widely predicted to exhibit a range of superlative functional properties; however, because they have only recently been isolated, these properties are yet to be shown to translate to improved performance in any application. PNRs show particular promise for optoelectronics, given their predicted high exciton binding energies, tunable bandgaps, and ultrahigh hole mobilities. Here, we verify the theorized enhanced hole mobility in both solar cells and spacecharge-limited-current devices, demonstrating the potential for PNRs improving hole extraction in universal optoelectronic applications. Specifically, PNRs are demonstrated to act as an effective charge-selective interlayer by enhancing hole extraction from polycrystalline methylammonium lead iodide (MAPbI 3 ) perovskite to the poly(triarylamine) semiconductor. Introducing PNRs at the hole-transport/MAPbI 3 interface achieves fill factors above 0.83 and efficiencies exceeding 21% for planar p−i−n (inverted) perovskite solar cells (PSCs). Such efficiencies are typically only reported for single-crystalline MAPbI 3 -based inverted PSCs. Methylammonium-free PSCs also benefit from a PNR interlayer, verifying applicability to architectures incorporating mixed perovskite absorber layers. Device photoluminescence and transient absorption spectroscopy are used to demonstrate that the presence of the PNRs drives more effective carrier extraction. Isolation of the PNRs in space-charge-limited-current hole-only devices improves both hole mobility and conductivity, demonstrating applicability beyond PSCs. This work provides primary experimental evidence that the predicted superlative functional properties of PNRs indeed translate to improved optoelectronic performance.

Understanding interfacial charge transfer processes such as trap-mediated recombination and injection into charge transport layers (CTLs) is crucial for the improvement of perovskite solar cells. Herein, we reveal that the chemical binding of charge transport layers to CH3NH3PbI3 defect sites is an integral part of the interfacial charge injection mechanism in both n-i-p and p-i-n architectures. Specifically, we use a mixture of optical and X-ray photoelectron spectroscopy to show that binding interactions occur via Lewis base interactions between electron-donating moieties on hole transport layers and the CH3NH3PbI3 surface. We then correlate the extent of binding with an improvement in the yield and longer lifetime of injected holes with transient absorption spectroscopy. Our results show that passivation-mediated charge transfer has been occurring undetected in some of the most common perovskite configurations and elucidate a key design rule for the chemical structure of next-generation CTLs.

Organic–inorganic halide perovskite materials have emerged as attractive alternatives to conventional solar cells, but device stability remains a concern. Recent research has demonstrated that the formation of superoxide species under exposure of the perovskite to light and oxygen leads to the degradation of CH3NH3PbI3 perovskites. In particular, it has been revealed that iodide vacancies in the perovskite are key sites in facilitating superoxide formation from oxygen. This paper shows that passivation of CH3NH3PbI3 films with an iodide salt, namely phenylethylammonium iodide (PhEtNH3I) can significantly enhance film and device stability under light and oxygen stress, without compromising power conversion efficiency. These observations are consistent with the iodide salt treatment reducing iodide vacancies and therefore lowers the yield of superoxide formation and improves stability. The present study elucidates a pathway to the future design and optimization of perovskite solar cells with greater stability.

Tin monosulfide (SnS) is emerging as a promising absorber material for the development of low cost, solution-processable solar cells. Herein, we present a straightforward , solution-based route for the preparation of tin monosulfide (SnS) films employing a green solvent, namely tetrahydrofuran (THF). We show that the surface coverage and the morphology of the SnS films can be tuned by modification of the precursor solution composition and film deposition conditions. Furthermore, we explore the effect of a PEDOT: interlayer and fabricate solar cells based on the following architecture: FTO/planar-TiO2/mesoporous-TiO2/SnS/P3HT/PEDOT:PSS/Ag. Devices based on this architecture are shown to exhibit power conversion efficiencies (PCEs) of 3.0%, thus demonstrating the potential of our method for the development of low-cost and environmentally friendly solar cells.