Objective: this work presents the results obtained in the development of a seismic velocity inversion model. The reference times recorded on the surface are taken and using the inversion model to obtain the initial reference model (hypocenters and velocities), starting from an unknown model. Methodology: A hypothetical reference model is proposed containing 64 blocks with interval velocity, 16 recording stations on the surface, and 64 earthquakes in the center of each block. With this model, the reference arrival times are generated for each earthquake registered in each station. The inversion model is made up of two parts: the direct model, which allows calculating the arrival times of the signal registered on the surface according to the hypo-central location of the earthquake and the velocity of the P and S wave of the medium; and the inverse model, which estimates a model of the velocity of the environment and hypo-central locations of the earthquakes that are the input variables of the direct model. The direct model was developed with the wave equation, while the inverse model was developed by modifying the generalized inverse matrix by introducing a factor called “damping.” Results: The discretization model is based on the finite difference method.. When estimating the values of velocity and hypo-central location with the inverse algorithm, the propagation of the wave is simulated with the direct model, and they are compared with the data of reference times measured on the surface. Depending on the value of the mean square error, we proceed to modify the mean velocities and hypocenters of the earthquakes. This process is repeated iteratively until the calculated error is less than a tolerance of 2x10-3s2. Conclusions: It was found that the estimated values of velocity and hypo central locations coincide well for regions closer to the surface, while for deep regions the error is greater compared to the hypothetical reference model.
A utilização de técnicas e métodos geofísicos nas geociências, para estudos de superfície e subsuperfície na região amazônica, pode contribuir para o desenvolvimento substancial do conhecimento sobre a geometria e disposição tridimensional das camadas de rocha nos intervalos de rochas localizadas a centenas de metros de profundidade dessa grande área, ainda pouco explorada. A integração de dados de superfície e de subsuperfície, abrange análises geológicas de estruturas em superfície, feições geomorfológicas ainda não identificadas e descritas na área. Neste estudo, o uso de seções sísmicas e de perfis de poço possibilitou a geração de um modelo geológico em profundidade. As evidências geomorfológicas e tectono-estratigráficas descritas na área foram obtidas a partir da avaliação sismoestrutural (falhas e dobras) e as sismoestratigráfica (canais, preenchimentos de canais, barras, vales, erosões e adelgaçamento de camadas). Com base nessas evidências, foi sugerida a ocorrência de feições associadas a cânions de diferente porte e vales, oriundos da reativação rúptil de estruturas preexistentes no embasamento Pré-cambriano. Além disso, também são encontradas evidências de sedimentação resultante da acreção lateral, erosão e adelgaçamento, influenciados por processos de subsidência e isostasia. As sequências sedimentares estabelecidas neste arcabouço são pertencentes a depósitos com idades do Paleógeno até o Quaternário ou recente. Estas evidências podem estar relacionadas com a evolução do Alto do Vaupés, que ocorre devido a falhamentos do paleozóico inferior, que sofreram reativação durante o paleógeno até o recente, com episódios tectonoestratigráficos associados.
Existe poca información y conocimiento geológico de la Cuenca de Urabá. A continuación, se presentan los resultados del estudio tomográfico pseudo-3D (o 2.5D) para la cuenca. Los datos de tipo sismológico (sísmica pasiva) permiten definir una aproximación de la disposición de algunos rasgos geológicos en el subsuelo, por ejemplo, lineamientos y fallas. Así, mediante la diferencia de tiempos de viaje de las ondas (P y S), registrados en campo e implementando un algoritmo de inversión de tomografía sísmica, se desarrolló un modelo para estimar las fuentes sísmicas y la distribución de velocidades en la región, además de evaluar la disposición de las capas de roca en el subsuelo hasta 30 km de profundidad, con las que se hizo posible identificar contrastes de velocidades y una posible extensión de las fallas; caso de la falla de Murindó hacia el norte, y otra falla con orientación transversal, ubicada en el sector de Riosucio.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.