No abstract

Background The introduction in the orthodontic field of the digital workflow for guided insertion of palatal TADs and the development of the 1-visit protocol led to the reduction of chair time and the possibility of complete customization of designs and materials. Conversely, the reduction of operative steps implicates a lower tolerance of deviations between the planned and the actual position of the miniscrews, particularly when the orthodontic device is fixed on 4 palatal TADs or has a rigid structure. This study aims to analyze the influence of each step of the digital workflow on the deviation of the miniscrews’ axis of insertion in a bicortical sample. The null hypothesis is that there are no significant differences in the deviations among the operative steps. Methods 33 subjects were selected for insertion of bicortical palatal miniscrews with a 1-visit protocol. Digital files were collected at the three stages of the workflow (i.e., digital planning, laboratory prototype, post-insertion impression). A 3D software analysis was performed on a total of 64 miniscrews. After automatic shape recognition of the guiding holes of the digital plan and the scanbodies of the laboratory prototype and post-insertion impression as geometric cylinders, their three-dimensional longitudinal axis was traced and the deviation among them was calculated. Friedman test with Bonferroni correction was performed to assess the significance of the deviations among the three steps, with significance set at p < 0.05. Results The laboratory step has a significantly lower degree of deviations (2.12° ± 1.62) than both the clinical step (6.23° ± 3.75) and the total deviations (5.70° ± 3.42). No significant differences were found between miniscrews inserted on the left or the right side. Conclusions This study suggests that laboratory procedures such as surgical guide production or rapid prototyping don’t play a significant role in the degree of deviations between the planned and the positioned palatal TADs. Conversely, the clinical steps have a bigger influence and need to be carefully evaluated. Despite this difference, there is a cumulative effect of deviations that can lead to the failure of the 1-visit protocol.

Malocclusions and temporomandibular disorders (TMDs) are oral health problems that are spread worldwide. To date, few studies focused on their prevalence and associated risk factors are available. This study aims to define the prevalence and distribution of odontostomatological traits and evaluate specific risk factors in isolated villages in north-eastern Italy, taking advantage of their environmental homogeneity. Nine hundred and forty-four participants aged six to eighty-nine years were enrolled. Thirty-one odontostomatological phenotypes, classified into five domains (airways, bad habits, extraoral and intraoral parameters, TMDs, and teeth), were evaluated. A descriptive statistical analysis was performed; mixed logistic models were used to test the relationships among the traits. According to the study’s findings, Angle’s class I was prevalent (65.3%) followed by class II malocclusion (24.3%); class III and reversed overjet were the least frequent malocclusions (10.4% and 1.8%, respectively). Temporomandibular joint (TMJ) click/noise was prevalent among TMDs (34.7%). The statistically significant (p-value < 0.05) risk factors were ankyloglossia for phonetic issues (OR 1.90) and bruxism for TMJ click/noise (OR 1.70) and pain (OR 2.20). Overall, this work provides a picture of the prevalence of malocclusions and TMDs in a large Italian sample and reveals risk factors to take into account in the development of preventive strategies and treatments.

(1) Background: Self-adhesive systems have been proposed for the orthodontic bonding with the intention to reduce the traditional three-component system. (2) Methods: The sample consisted of 32 extracted intact permanent premolars randomly divided into two groups (n = 16). In Group I the metal brackets were bonded with Transbond XT Primer and Transbond XT Paste. In Group II the metal brackets were bonded with GC Ortho connect. The resin was polymerized for 20 s from two directions (mesial and occlusal) using a Bluephase light-curing unit. The shear bond strength (SBS) was measured using a universal testing machine. Immediately after SBS testing, Raman microspectrometry was performed for each sample to calculate the degree of conversion (DC). (3) Results: There was no statistically significant difference in the SBS between the two groups. A significantly higher DC (p < 0.001) value was recorded in Group II, in which the brackets were bonded with GC. Very weak or no correlation (0.01) was recorded between SBS and DC in Group I and moderate positive correlation was recorded in Group II (0.33). (4) Conclusions: No difference was found in SBS between the conventional and two-step systems used in orthodontics. The two-step system demonstrated higher DC compared to the conventional system. There is a very weak or moderate correlation between DC and SBS.

No abstract