Tea contains about 230 chemical bioactive compounds, of which polyphenols represent the most considerable fraction (30% of total dry weight). These compounds have relevant nutritional and pharmacological effects on human health, exerting antioxidant activities against oxidative stress-induced damage. The industrial processes applied in tea production can lead to qualitative and quantitative changes in the phenolic content and composition and in antioxidant properties, thus influencing their potential biological activities. Meanwhile, the procedure for tea preparation may influence the quantity of the extracted phenolic compounds. In this study, the effects of different infusion parameters, such as the water type used for infusion (tap water, distilled water, and natural mineral water), time (3, 5, and 10 min), temperature (T = 80 °C and 100 °C), and pH (ranged between 3 and 9) were considered. The optimal infusion variables resulting from the study were obtained by extracting phenolic compounds at T = 100 °C for 10 min, both for green (916.12–1169.81 mg GAE/g) and black (932.03–1126.62 mg GAE/g) bagged tea samples, respectively.

Biogenic amines are ubiquitous bioactive compounds that are synthesized by living organisms and perform essential functions for their metabolism. In the human diet, their excessive intake can cause food poisoning. In food, especially in alcohol-free beverages, biogenic amines can be synthesized by enzymes, naturally present in raw materials, or by microorganisms, which may be naturally present in the matrix or be added during beverage transformation processes. For this reason, in alcohol-free beverages, biogenic amine amount can be considered, above a certain level, as undesired microorganism activity. Therefore, it is important to evaluate the biogenic amine profile of non-alcoholic beverages in order to monitor food quality and safety. Moreover, biogenic amines can be taken into account by industries in order to monitor production processes and products. This review article provides an overview on the biogenic amine profile of alcohol-free beverages (plant milk, nervine drinks, soft drinks, and fruit juices). Furthermore, the clinical and toxicological effects, the biogenic amines legislation, and biogenic amine synthesis have been evaluated in non-alcoholic beverages.

Coffee is one of the most widely consumed beverages worldwide, mainly due to its organoleptic, and psychoactive properties. Coffee brewing techniques involve the use of different extraction/infusion conditions (i.e., time, temperature, pressure, water/powder ratio, etc.), which can influence the quality of the final product. The study aimed to analyze the effect of four brewing coffee techniques (industrial espresso machine, Moka machine, pod machine, and capsule machine), which are the most used coffee brewing methods in Italy, on the quality and safety of the coffee brews, taking into account the profile of biogenic amines (BAs), total polyphenol content (TPC), total flavonoid content (TFC) and anti-radical activity (DPPH and ABTS assay). Eight coffee powders and brewed beverages from two different brands belonging to the 100% Arabica variety (country of origin Brazil) were analysed. The brewing techniques all resulted in a reduction of both BA content (27–30%), TPC (55–60%), TFC (50–55%), and anti-radical assays (45–50%) in coffee beverages compared to ground coffee samples. The study also showed that Moka is the method that yields the highest TPC (2.71–3.52 mg GAE/g coffee powder) and TFC (8.50–8.60 mg RUT/g coffee powder) content and highest anti-radical capacity in coffee beverages. The multivariate statistical analysis revealed a difference between coffee powder and infusions and coffee infusions obtained by different extraction techniques. Moreover, an analysis of the environmental impacts related to the different coffee preparation methods examined was conducted. This was performed by applying the Life Cycle Assessment (LCA) methodology through SimaPro v.9.2.2. software.

Biogenic amines (BAs) are natural contaminants of wine that originate from decarboxylase microorganisms involved in fermentation processes. The primary relevance of biogenic amines in food could have both toxic effects on consumers’ health (i.e., allergic reactions, nausea, tremors, etc.), if present at high concentrations, and concurrently it can be considered as a remarkable indicator of quality and/or freshness. Therefore, the presence of nine biogenic amines [Tryptamine (TRP), ß-phenylethylamine (ß-PEA), putrescine (PUT), cadaverine (CAD), histamine (HIS), serotonin (SER), tyramine (TYR), spermidine (SPD), and spermine (SPM)] was investigated in red and white wine samples, which differed in the winemaking processes. The qualitative-quantitative determination of BAs was carried out by chromatographic methods (HPLC-UV/Vis and LC-ESI-MS). The analysis showed that both winemaking processes had all the nine BAs considered in the study at different amounts. Data showed that red wines had a higher concentration of PUT (10.52 mg L−1), TYR (7.57 mg L−1), and HIS (6.5 mg L−1), the BAs most involved in food poisoning, compared to white wines, probably related to the different type of fermentation (alcoholic and malolactic).

Summary The green solvents and eco‐extraction methods are gaining increasing interest in chemical analysis for bioactive compounds in food matrices. Deep Eutectic Solvents (DES) developed as a greener and more sustainable alternative to organic solvents, owing to their non‐toxic, highly stable, and biodegradation‐friendly nature. DES application for polyphenols and antioxidant compounds extraction in dark chocolate samples has been evaluated in an integrated study for sustainability assessment, based on multivariate analysis and Life Cycle Assessment (LCA) methodology. A green extraction method based on DES was proposed testing different HBA:HBD pairs (ChCl:Fru, ChCl:Teg, Bet:Fru, and Bet:Teg). DES Bet:Fru resulted in the highest extraction yield in terms of both total polyphenols (0.34–3.37 g GAE/100 g) and flavonoids (1.13–8.32 g RUT/100 g), P < 0.05. Furthermore, the environmental performances of green and conventional solvents (MeOH:H2O, H2O, and MeOH) were evaluated by applying a comparative LCA (c‐LCA). The c‐LCA study highlighted that conventional extraction for polyphenols in dark chocolate was 60% more impactful than DES. DES pairs analysed quantitatively lowest impacted than conventional methods, considering the macro‐categories Human Health (9.99 × 10–8 ÷ 1.54 × 10–7 DALYs), Ecosystem (2.29 × 10–10 ÷ 3.57 × 10–10 species.yr), and Resources (6.57 × 10–3 ÷ 8.96 × 10–3 USD2013).

No abstract

According to the United Nations (2020), since the 1980s, the global overall rate of water use has grown by 1% per year, and it is projected that, by 2050, humanity’s water footprint could exceed 30% of current levels. This situation is in stark contrast to the path toward the Sustainable Development Goals, especially Goal 6, “clean water and sanitation”, which also influences Goal 14, “life below water”, and Goal 15, “life on land”. This is because the availability of water directly affects the food security and production capacity of each Country, and therefore its management is a crucial issue worthy of particular attention. Problems related to water security are particularly evident in the Mediterranean area, which is already facing high environmental challenges. It is an area severely affected by global warming; thus, it is one of the most vulnerable environments to climate change globally. It follows that the improper management of water resources could further worsen an already alarming situation. This research aims to study the main water-related challenges that Mediterranean Countries face, highlighting the significant problems that weaken each Country. In this regard, the indicators relating to Goal 6 were considered, to define each Country’s current state. However, for a correct understanding, the main problems these Countries face were researched through a critical review of the literature (Scopus, Google Scholar, Web of Science). In this way, we were able to underline the effects of human activities on the hydrosphere and the repercussions on various ecosystems, following the drivers-pressures-state-impact-response causal framework. The results suggest that there is still a long way for Mediterranean Countries to progress toward Agenda 2030, as they face problems related to chemical (nitrate, microplastics, heavy metals, pesticides, etc.) and biological (E. coli and other microorganisms) pollution, as well as saline aquifers, absent or obsolete infrastructures, and transboundary basins. Hence, this study aims to provide valuable tools for a better evaluation of water management in Mediterranean Countries.

PurposeHempseed oil is a valuable emerging food product with recognized health positivity due to its composition. The paper aims to propose a multi-methodological chemical profiling of nine organic hempseed oil samples (different brands and prices) from the retail market, followed by multivariate data analysis.Design/methodology/approachFatty acids, tocopherols, squalene, total carotenoids content, phenolic compounds, total phenolic content and anti-radical activity (DPPH• and ABTS•+ assays) were determined through chromatographic and spectrophotometric techniques. Multivariate (explorative and discriminant) analyses were applied to the profiling results to classify samples according to information claimed on the label, i.e. geographical origin (EU vs. non-EU), extraction procedure (cold-pressed vs. not cold-pressed) and price (lower or higher than 10 € per 250 mL).FindingsThe chemical analysis confirmed the 3 to 1 ?-6:?-3 ratio and the excellent content in antioxidant species. However, no specific trend of results can be stressed. PCA (after variables selection) highlighted a natural grouping of samples, so three discriminant analyses were performed: kNN, Naïve Bayes and LDA. The best classification efficiency was reached for the extraction procedure verification (93–100% correct classification), followed by geographical origin (83–94%) and prices (81.6–90%).Originality/valueThe integrated approach of chemical profiling coupled with multivariate analyses allowed the assessment of label information of the analyzed organic hempseed oil samples, despite the wide heterogeneity of the selected samples.