The formation, phase relations, crystal chemistry and physical properties were investigated for the solid solution deriving from binary clathrate with a solubility limit of 8 Zn atoms per formula unit at 800 °C ( is a vacancy). Single-crystal x-ray data throughout the homogeneity region confirm the clathrate type I structure with cubic primitive space group type . Temperature-dependent x-ray spectra as well as heat capacity define a low-lying, almost localized, phonon branch, whereas neutron spectroscopy indicates a phonon mode with significant correlations. The transport properties are strongly determined by the Ge/Zn ratio in the framework of the structure. Increasing Zn content drives the system towards a metal-to-insulator transition; for example, shows metallic behaviour at low temperatures, whilst at high temperatures semiconducting features become obvious. A model based on a gap of the electronic density of states slightly above the Fermi energy was able to explain the temperature dependences of the transport properties. The thermal conductivity exhibits a pronounced low-temperature maximum, dominated by the lattice contribution, while at higher temperatures the electronic part gains weight. Zn-rich compositions reveal attractive Seebeck coefficients approaching −180 µV K−1 at 700 K.

This paper describes a new multiplexed label-free biosensor. The detection technology is based on nanostructured gold-polymer surfaces. These surfaces support surface plasmon resonance modes that can be probed by a miniaturized optical setup. The optical characterization of the sensing chip shows the sensitivity and the limit-of-detection to refractive index changes. Moreover, by studying the progressive adhesion of molecular monolayers of polyelectrolytes, the decay of the plasmonic mode electric field above the surface has been reconstructed. A multiplexed label-free biosensing device is then described and characterized in terms of sensitivity, lateral resolution, and sensitivity to a model biological assay. The sensitivity in imaging mode of the device is of the order of 10-6 refractive index units, while the measured lateral resolution is 6.25 μm within a field of view of several tenths of mm2, making the instrument unique in terms of multiplexing capability. Finally, the proof-of-concept application of the technology as a point-of-care diagnostic tool for an inflammatory marker is demonstrated.

No abstract

This paper describes the electro-optic response of a suspension of disk-like colloids. We have considered aqueous suspensions of Gibbsite platelets and measured the electrically induced birefringence in the broad frequency range 10(2)-10(8) Hz. When simply dispersed in an electrolyte solution, these particles orient with their major axis parallel to the electric field at all frequencies. The spectral dependence of their Kerr coefficient features three regimes: an electrokinetic α-relaxation within the kHz range, a conductive Maxwell-Wagner-O'Konski (MWO) relaxation having characteristic frequency in the 1-10 MHz range, and a nonzero high frequency asymptote. We quantitatively analyze the MWO spectral component and the high-frequency asymptote on the basis of a model developed for oblate particles. This analysis enables us to obtain the relevant particle properties: surface conductivity, zeta potential, and intrinsic Gibbsite birefringence. When the particles are dispersed in a mixture that also contains smaller spherical particles that have a charge of the same sign, their electric birefringence becomes negative at low frequency. This anomalous orientation of the platelets is analogous to that observed in mixtures of prolate and spherical particles, and demonstrates the anomalous birefringence as a universal property of suspensions of nonspherical particles when surrounded by smaller charged particles.

An all-polymer photonic structure constituted by a distributed Bragg reflector topped with an ultrathin fluorescent polymer film has been studied. A Bloch surface wave resonance has been exploited to improve pumping efficiency. A strongly polarization and angle dependent fluorescence signal is found with respect to the light pumping beam and the emitted wavelength. Matching the most favorable condition for the pump coupling and the collection geometry, the signal obtained from the structure appears to be two orders of magnitude larger than the one of the bare emitting film.

In the last decade, biochemical sensors have brought a disruptive breakthrough in analytical chemistry and microbiology due the advent of technologically advanced systems conceived to respond to specific applications. From the design of a multitude of different detection modalities, several classes of sensor have been developed over the years. However, to date they have been hardly used in point-of-care or in-field applications, where cost and portability are of primary concern. In the present review we report on the use of nanostructured organic and hybrid compounds in optoelectronic, electrochemical and plasmonic components as constituting elements of miniaturized and easy-to-integrate biochemical sensors. We show how the targeted design, synthesis and nanostructuring of organic and hybrid materials have enabled enormous progress not only in terms of modulation and optimization of the sensor capabilities and performance when used as active materials, but also in the architecture of the detection schemes when used as structural/packing components. With a particular focus on optoelectronic, chemical and plasmonic components for sensing, we highlight that the new concept of having highly-integrated architectures through a system-engineering approach may enable the full expression of the potential of the sensing systems in real-setting applications in terms of fast-response, high sensitivity and multiplexity at low-cost and ease of portability.

We demonstrate photoluminescence excitation enhancement in an all-polymer flexible onedimensional\ud photonic crystal structure capped with a fluorescent organic ultrathin film. When optical\ud matching conditions between the excitation beam and the Bloch Surface Wave mode supported\ud by the photonic structure are achieved, a ten times enhancement of the photoluminescence is\ud observed. We notice that in these systems luminescence signal reinforcement is achieved by\ud increasing the pump efficiency with no need of spectral resonance to the emission of the chosen fluorophore.\ud All these features make these systems suitable candidates for easy, flexible, and cheap\ud fluorescent sensing

Subwavelength nanostructured surfaces are realized with self-assembled vertically-aligned InAs nanowires, and their functionalities as optical reflectors are investigated. In our system, polarization-resolved specular reflectance displays strong modulations as a function of incident photon energy and angle. An effective-medium model allows one to rationalize the experimental findings in the long wavelength regime, whereas numerical simulations fully reproduce the experimental outcomes in the entire frequency range. The impact of the refractive index of the medium surrounding the nanostructure assembly on the reflectance was estimated. In view of the present results, sensing schemes compatible with microfluidic technologies and routes to innovative nanowire-based optical elements are discussed.