Convoluted interactions occur between droplet size, carrier volume, and other application parameters. Recommendations for optimizing herbicide applications based on droplet size should be based on a site-specific management approach to better account for these interactions. © 2018 Society of Chemical Industry.
Chemical weed control remains a widely used component of integrated weed management strategies because of its cost-effectiveness and rapid removal of crop pests. Additionally, dicamba-plus-glyphosate mixtures are a commonly recommended herbicide combination to combat herbicide resistance, specifically in recently commercially released dicamba-tolerant soybean and cotton. However, increased spray drift concerns and antagonistic interactions require that the application process be optimized to maximize biological efficacy while minimizing environmental contamination potential. Field research was conducted in 2016, 2017, and 2018 across three locations (Mississippi, Nebraska, and North Dakota) for a total of six site-years. The objectives were to characterize the efficacy of a range of droplet sizes [150 µm (Fine) to 900 µm (Ultra Coarse)] using a dicamba-plus-glyphosate mixture and to create novel weed management recommendations utilizing pulse-width modulation (PWM) sprayer technology. Results across pooled site-years indicated that a droplet size of 395 µm (Coarse) maximized weed mortality from a dicamba-plus-glyphosate mixture at 94 L ha–1. However, droplet size could be increased to 620 µm (Extremely Coarse) to maintain 90% of the maximum weed mortality while further mitigating particle drift potential. Although generalized droplet size recommendations could be created across site-years, optimum droplet sizes within each site-year varied considerably and may be dependent on weed species, geographic location, weather conditions, and herbicide resistance(s) present in the field. The precise, site-specific application of a dicamba-plus-glyphosate mixture using the results of this research will allow applicators to more effectively utilize PWM sprayers, reduce particle drift potential, maintain biological efficacy, and reduce the selection pressure for the evolution of herbicide-resistant weeds.
Core Ideas Model fit increased by predicting optimum droplet sizes for site‐specific scenarios. Generally, an Extremely Coarse spray would be recommended for a 2,4‐D choline plus glyphosate application. Site‐specific weed management using PWM sprayers was both manageable and effective. Weed control reductions were observed as droplet size increased at several site‐years. Alternative drift reduction efforts must be identified to avoid weed control losses. ABSTRACT The delivery of an optimum herbicide droplet size using pulse‐width modulation (PWM) sprayers can reduce potential environmental contamination, maintain efficacy, and provide more flexible options for pesticide applicators. Field research was conducted in 2016, 2017, and 2018 across three locations (Mississippi, Nebraska, and North Dakota) for a total of 6 site‐years. The objectives were to evaluate the efficacy of a range of droplet sizes (150 µm [Fine] to 900 µm [Ultra Coarse]) using a 2,4‐D choline plus glyphosate pre‐mixture and to create novel weed management recommendations using PWM sprayer technology. A pooled site‐year generalized additive model explained less than 5% of the model deviance, so a site‐specific analysis was conducted. Across the Mississippi and North Dakota sites, a 900‐µm (Ultra Coarse) droplet size maintained 90% of the maximum weed control. In contrast, at the Nebraska sites, droplet sizes between 565 and 690 µm (Extremely Coarse) were almost exclusively required to maintain 90% of the maximum weed control, likely due to weed leaf architecture. Severe reductions in weed control were observed as droplet size increased at several site‐years. Alternative drift reduction practices must be identified; otherwise, weed control reductions will be observed. This research illustrated that PWM sprayers paired with appropriate nozzle–pressure combinations for 2,4‐D choline plus glyphosate pre‐mixture could be effectively implemented into precision agricultural practices by generating optimum herbicide droplet sizes for site‐specific management plans. To fully optimize spray applications using PWM technology, future research must holistically investigate the influence of application parameters and conditions.
Amaranthus palmeri S. Watson has become a weed of economic importance throughout the South-eastern United States in the last 20 years (Webster and Nichols, 2012) being especially problematic in soyabean (Glycine max L. Merr.) and cotton (Gossypium hirsutum L.) fields (Bensch et al., 2003;Berger et al., 2015). Recently, multiple reports have indicated that this weed species is invading agricultural
Acifluorfen is a nonsystemic PPO-inhibiting herbicide commonly used for POST Palmer amaranth control in soybean, peanut, and rice across the southern United States. Concerns have been raised regarding herbicide selection pressure and particle drift, increasing the need for application practices that optimize herbicide efficacy while mitigating spray drift. Field research was conducted in 2016, 2017, and 2018 in Mississippi and Nebraska to evaluate the influence of a range of spray droplet sizes [150 μm (Fine) to 900 μm (Ultra Coarse)], using acifluorfen to create a novel Palmer amaranth management recommendation using pulse width modulation (PWM) technology. A pooled site-year generalized additive model (GAM) analysis suggested that 150-μm (Fine) droplets should be used to obtain the greatest Palmer amaranth control and dry biomass reduction. Nevertheless, GAM models indicated that only 7.2% of the variability observed in Palmer amaranth control was due to differences in spray droplet size. Therefore, location-specific GAM analyses were performed to account for geographical differences to increase the accuracy of prediction models. GAM models suggested that 250-μm (Medium) droplets optimize acifluorfen efficacy on Palmer amaranth in Dundee, MS, and 310-μm (Medium) droplets could sustain 90% of maximum weed control. Specific models for Beaver City, NE, indicated that 150-μm (Fine) droplets provide maximum Palmer amaranth control, and 340-μm (Medium) droplets could maintain 90% of greatest weed control. For Robinsonville, MS, optimal Palmer amaranth control could be obtained with 370-μm (Coarse) droplets, and 90% maximum control could be sustained with 680 μm (Ultra Coarse) droplets. Differences in optimal droplet size across location could be a result of convoluted interactions between droplet size, weather conditions, population density, plant morphology, and soil fertility levels. Future research should adopt a holistic approach to identify and investigate the influence of environmental and application parameters to optimize droplet size recommendations.
BACKGROUND: Flooding throughout fall and winter months is an effective practice for rice (Oryza sativa L.) straw decomposition, soil seedbank depletion, and waterfowl habitat in Mississippi. Nevertheless, limited research is available regarding the effects of fall-winter flooding and seed burial depth on Palmer amaranth (Amaranthus palmeri S. Wats.) seed germination. The objective of this study was to evaluate the effect of flooding period and seed burial depth on A. palmeri seed damage and germination in three different soil textures in Mississippi. RESULTS: Amaranthus palmeri seed damage was greater when seeds were buried in sandy loam compared to silt loam soil textures. An interaction between flooding period and seed burial depth was present for A. palmeri seed germination. Flooding periods of 1-month (at 0 and 15 cm burial depth) and 2 months (at 0 cm burial depth) provided similar A. palmeri seed germination compared to no-flooding (at 0 cm burial depth). In addition, flooding periods of 3, 4, and 5 months reduced A. palmeri seed germination by 10, 10 and 14 percentage points at 0 cm burial depth, and 36, 40, and 41 percentage points when seeds were buried at 15 cm, respectively, across all soil textures. CONCLUSION: This research demonstrates that flooding for 3, 4, and 5-months throughout fall and winter is an effective cultural practice to increase soil seedbank depletion through reduced germination potential to help manage herbicide-resistant A. palmeri populations in sandy loam, silt, and silt loam soil textures.
Herbicide applications performed with pulse width modulation (PWM) sprayers to deliver specific spray droplet sizes could maintain product efficacy, minimize potential off-target movement, and increase flexibility in field operations. Given the continuous expansion of herbicide-resistant Palmer amaranth populations across the southern and midwestern United States, efficacious and cost-effective means of application are needed to maximize Palmer amaranth control. Experiments were conducted in two locations in Mississippi (2016, 2017, and 2018) and one location in Nebraska (2016 and 2017) for a total of 7 site-years. The objective of this study was to evaluate the influence of a range of spray droplet sizes [150 (Fine) to 900 μm (Ultra Coarse)] on lactofen and acifluorfen efficacy for Palmer amaranth control. The results of this research indicated that spray droplet size did not influence lactofen efficacy on Palmer amaranth. Palmer amaranth control and percent dry-biomass reduction remained consistent with lactofen applied within the aforementioned droplet size range. Therefore, larger spray droplets should be used as part of a drift mitigation approach. In contrast, acifluorfen application with 300-μm (Medium) spray droplets provided the greatest Palmer amaranth control. Although percent biomass reduction was numerically greater with 300-μm (Medium) droplets, results did not differ with respect to spray droplet size, possibly as a result of initial plant injury, causing weight loss, followed by regrowth. Overall, 900-μm (Ultra Coarse) droplets could be used effectively without compromising lactofen efficacy on Palmer amaranth, and 300-μm (Medium) droplets should be used to achieve maximum Palmer amaranth control with acifluorfen.
A chloroacetamide herbicide by application timing factorial experiment was conducted in 2017 and 2018 in Mississippi to investigate chloroacetamide use in a dicamba-based Palmer amaranth management program in cotton production. Herbicides used were S-metolachlor or acetochlor, and application timings were preemergence, preemergence followed by (fb) early postemergence, preemergence fb late postemergence, early postemergence alone, late postemergence alone, and early postemergence fb late postemergence. Dicamba was included in all preemergence applications, and dicamba plus glyphosate was included with all postemergence applications. Differences in cotton and weed response due to chloroacetamide type were minimal, and cotton injury 14 d after LP application was less than 10% for all application timings. Late-season weed control was reduced up to 30 and 53% if chloroacetamide application occurred PRE or LP only, respectively. Late-season weed densities were minimized if multiple applications were used instead of a single application. Cotton height was reduced by up to 23% if a single application was made LP relative to other application timings. Chloroacetamide application at any timing except PRE alone minimized late season weed biomass. Yield was maximized by any treatment involving multiple applications or EP alone whereas applications PRE or LP alone resulted in up to 56 and 27% yield losses, respectively. While no yield loss was reported by delaying the first of sequential applications until EP, foregoing a PRE application is not advisable given the multiple factors that may delay timely POST applications such as inclement weather.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.