To fabricate a hydrophobic coating using the sol-gel method (Pechini), an experimental design using the drying time and chemicals ratio as variables was developed. The coating was deposited on an aluminum substrate (AA6061-T6) treated by acid solution or anodization method. The surface wettability was measured using a goniometric instrument. Coatings were fabricated using different numbers of layers, heating rates, and drying temperatures, and their morphologies were observed using visual analysis and scanning electron microscopy. The use of anodization treatment with a furnace ramp of 1 °C min-1, a drying temperature of 220 °C ± 10 °C, and single-layer application, produced a coating free of visible flaws and apparent damage. The coating was obtained with a 15:1 glycerin:citric acid ratio and sample pre-polymerization in the drying oven for 1 hour at 100 °C resulted in the highest contact angle, 62° ± 2°, which meets the ASTM D-7334-08 standard for a hydrophobic surface.
Os desafios da engenharia industrial na produção de alimentos, energia renovável e na promoção da qualidade de vida das pessoas.""Os desafios da engenharia industrial na produção de alimentos, energia renovável e na promoção da qualidade de vida das pessoas."
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.