Background: The current availability of advanced remote sensing technologies in the field of landslide analysis allows for rapid and easily updatable data acquisitions, improving the traditional capabilities of detection, mapping and monitoring, as well as optimizing fieldwork and investigating hazardous or inaccessible areas, while granting at the same time the safety of the operators. Among Earth Observation (EO) techniques in the last decades optical Very High Resolution (VHR) and Synthetic Aperture Radar (SAR) imagery represent very effective tools for these implementations, since very high spatial resolution can be obtained by means of optical systems, and by the new generations of sensors designed for interferometric applications. Although these spaceborne platforms have revisiting times of few days they still cannot match the spatial detail or time resolution achievable by means of Unmanned Aerial Vehicles (UAV) Digital Photogrammetry (DP), and ground-based devices, such as Ground-Based Interferometric SAR (GB-InSAR), Terrestrial Laser Scanning (TLS) and InfraRed Thermography (IRT), which in the recent years have undergone a significant increase of usage, thanks to their technological development and data quality improvement, fast measurement and processing times, portability and cost-effectiveness. In this paper the potential of the abovementioned techniques and the effectiveness of their synergic use is explored in the field of landslide analysis by analyzing various case studies, characterized by different slope instability processes, spatial scales and risk management phases. Results: Spaceborne optical Very High Resolution (VHR) and SAR data were applied at a basin scale for analysing shallow rapid-moving and slow-moving landslides in the emergency management and post-disaster phases, demonstrating their effectiveness for post-disaster damage assessment, landslide detection and rapid mapping, the definition of states of activity and updating of landslide inventory maps. The potential of UAV-DP for very high resolution periodical checks of instability phenomena was explored at a slope-scale in a selected test site; two shallow landslides were detected and characterized, in terms of areal extension, volume and temporal evolution. The combined use of GB-InSAR, TLS and IRT ground based methods, was applied for the surveying, monitoring and characterization of rock slides, unstable cliffs and translational slides. These applications were evaluated in the framework of successful rapid risk scenario evaluation, long term monitoring and emergency management activities. All of the results were validated by means of field surveying activities.

In this paper, the updating of the landslide inventory of Tuscany region is presented. To achieve this goal, satellite SAR data processed with persistent scatter interferometry (PSI) technique have been used. The updating leads to a consistent reduction of unclassified landslides and to an increasing of active landslides. After the updating, we explored the characteristics of the new inventory, analysing landslide distribution and geomorphological features. Several maps have been elaborated, as sliding index or landslide density map; we also propose a density-area map to highlight areas with different landslide densities and sizes. A frequency-area analysis has been performed, highlighting a classical negative power-law distribution. We also explored landslide frequency for lithology, soil use and several morphological attributes (elevation, slope gradient, slope curvature), considering both all landslides and classified landslide types (flows, falls and slides).

This paper presents the preliminary results of the IPL project 196 BDevelopment and applications of a multi-sensor drone for geohazards monitoring and mapping.^The objective of the project is to test the applicability of a multi-sensor drone for the mapping and monitoring of different types of geohazards. The Department of Earth Sciences of the University of Florence has developed a new type of drone airframe. Several survey campaigns were performed in the village of Ricasoli, in the Upper Arno river Valley (Tuscany, Italy) with the drone equipped with an optical camera to understand the possibility of this rising technology to map and characterize landslides. The aerial images were combined and analyzed using Structure-from-Motion (SfM) software. The collected data allowed an accurate reconstruction and mapping of the detected landslides. Comparative analysis of the obtained DTMs also permitted the detection of some slope portions being prone to failure and to evaluate the area and volume of the involved mass.

No abstract

On 1 October 2009, a high intensity storm hit the Ionian coast of Sicily, SW of Messina, Italy. The Santo Stefano di Briga rain gauge, located 2 km W of the Ionian coast, recorded 225 mm of rain in seven hours. The intense rainfall event triggered abundant slope failures, and resulted in widespread erosion and deposition of debris along ephemeral drainage channels, extensive inundation, and local modifications of the coastline. Landslides occurred in a territory prone to slope failures, due to the local geological and geomorphological settings. Many landslides were related to the presence of roads lacking adequate drainage. Abandoned terraced slopes lacking proper drainage, and unmaintained dry walls were also related to slope failures. Damage was particularly severe in small villages and at several sites along the transportation network. The shallow landslides and the inundation resulted in 37 fatalities, including 31 deaths and six missing persons, and innumerable injured people. After the event, an accurate landslide inventory map was prepared for the Briga and the Giampilieri catchments. The map shows: (i) the distribution of the event landslides triggered by the 1 October 2009 rainfall event; (ii) the distribution of the pre-existing slope failures; and (iii) other geomorphological features related to fluvial processes and slope movements. The landslide inventory map was prepared at 1:10,000 scale through a combination of field surveys and photo-interpretation of pre-event and post-event, stereoscopic and pseudo-stereoscopic, aerial photography. Different types of aerial photographs were analysed visually to prepare the landslide inventory map. The event landslides were mapped through the interpretation of pseudostereoscopic colour photographs taken shortly after the event at 1:3500 scale, combined with digital stereoscopic photographs at approximately 1:4500 scale, taken in November 2009. The pre-event landslides and the associated geomorphological features were mapped using 1:33,000 scale aerial photographs flown in 1954, 1955, and 2005. The event and pre-existing landslides were checked in the field in the period OctoberNovember 2009.

No abstract

No abstract

On the night of 13 December 1982, Ancona experienced the catastrophic reactivation of an old and large landslide located along the coast to the west of the city. The outcomes of past and new geotechnical investigations and the data from the 30 year readings of the monitoring instruments have been integrated to redefine and update the actual location of the sliding surfaces. According to the new analysis, the landslide involves four main sliding surfaces with different extents and depths. The deepest surfaces converge at depth in a shear band and their toes are positioned near or beyond the coast. Numerical and analytical modelling of the landslide has been carried out using the newly derived sliding surface geometries. The numerical modelling has allowed a qualitative assessment of the deformation pattern, confirming the geometry of the sliding surfaces derived from the geotechnical investigations. The stability analyses have been performed applying the limit equilibrium method to quantify the instability conditions of the landside. The analyses have been carried out for five stratigraphic-geotechnical scenarios. All of these scenarios show a stability condition near the limit equilibrium.