The generation of energetic electron bunches by the interaction of a short, ultraintense (I>10(19) W/cm(2)) laser pulse with "grating" targets has been investigated in a regime of ultrahigh pulse-to-prepulse contrast (10(12)). For incidence angles close to the resonant condition for surface plasmon excitation, a strong electron emission was observed within a narrow cone along the target surface, with energy spectra peaking at 5-8 MeV and total charge of ∼100 pC. Both the energy and the number of emitted electrons were strongly enhanced with respect to simple flat targets. The experimental data are closely reproduced by three-dimensional particle-in-cell simulations, which provide evidence for the generation of relativistic surface plasmons and for their role in driving the acceleration process. Besides the possible applications of the scheme as a compact, ultrashort source of MeV electrons, these results are a step forward in the development of high-field plasmonics.
We report on the development of foam-based double-layer targets (DLTs) for laser-driven ion acceleration. Foam layers with a density of a few mg cm −3 and controlled thickness in the 8-36 μm range were grown on μm-thick Al foils by pulsed laser deposition (PLD). The DLTs were experimentally investigated by varying the pulse intensity, laser polarisation and target properties. Comparing DLTs with simple Al foils, we observed a systematic enhancement of the maximum and average energies and number of accelerated ions. Maximum energies up to 30 MeV for protons and 130 MeV for C 6+ ions were detected. Dedicated three-dimensional particle-in-cell (3D-PIC) simulations were performed considering both uniform and clusterassembled foams to interpret the effect of the foam nanostructure on the acceleration process.
The acceleration of dense targets driven by the radiation pressure of high-intensity lasers leads to a Rayleigh-Taylor instability (RTI) with rippling of the interaction surface. Using a simple model it is shown that the self-consistent modulation of the radiation pressure caused by a sinusoidal rippling affects substantially the wave vector spectrum of the RTI, depending on the laser polarization. The plasmonic enhancement of the local field when the rippling period is close to a laser wavelength sets the dominant RTI scale. The nonlinear evolution is investigated by three-dimensional simulations, which show the formation of stable structures with "wallpaper" symmetry.
The development of novel target concepts is crucial to make laser-driven acceleration of ion beams\ud suitable for applications. We tested double-layer targets formed of an ultralow density nanostructured\ud carbon layer (∼7 mg=cm3, 8–12 μm–thick) deposited on a μm–thick solid Al foil. A systematic increase in\ud the total number of the accelerated ions (protons and C6þ) as well as enhancement of both their maximum\ud and average energies was observed with respect to bare solid foil targets. Maximum proton energies up to\ud 30 MeV were recorded. Dedicated three-dimensional particle-in-cell simulations were in remarkable\ud agreement with the experimental results, giving clear indication of the role played by the target\ud nanostructures in the interaction process
The excitation of surface plasmons with ultra-intense (I $ 5 Â 10 19 W/cm 2), high contrast ($10 12) laser pulses on periodically modulated solid targets has been recently demonstrated to produce collimated bunches of energetic electrons along the target surface [Fedeli et al., Phys. Rev. Lett. 116, 015001 (2016)]. Here, we report an extensive experimental and numerical study aimed to a complete characterization of the acceleration mechanism, demonstrating its robustness and promising characteristics for an electron source. By comparing different grating structures, we identify the relevant parameters to optimize the acceleration and obtain bunches of $650 pC of charge at several MeV of energy with blazed gratings.
Ion beam analysis techniques are among the most powerful tools for advanced materials characterization. Despite their growing relevance in a widening number of fields, most ion beam analysis facilities still rely on the oldest accelerator technologies, with severe limitations in terms of portability and flexibility. In this work we thoroughly address the potential of superintense laser-driven proton sources for this application. We develop a complete analytical and numerical framework suitable to describe laser-driven ion beam analysis, exemplifying the approach for Proton Induced X-ray/Gamma-ray emission, a technique of widespread interest. This allows us to propose a realistic design for a compact, versatile ion beam analysis facility based on this novel concept. These results can pave the way for ground-breaking developments in the field of hadron-based advanced materials characterization.
The investigation of superintense laser-driven ion sources and their potential applications offers unique opportunities for multidisciplinary research. Plasma physics can be combined with materials and nuclear science, radiation detection and advanced laser technology, leading to novel research challenges of great fundamental and applicative interest. In this paper we present interesting and comprehensive results on nanostructured low density (near-critical) foam targets for TW and PW-class lasers, obtained in the framework of the European Research Council ENSURE project. Numerical simulations and experimental activities carried out at 100 s TW and PW-class laser facilities have shown that targets consisting of a solid foil coated with a nanostructured low-density (near-critical) foam can lead to an enhancement of the ion acceleration process. This stimulated a thorough numerical investigation of superintense laser-interaction with nanostructured near-critical plasmas. Thanks to a deep understanding of the foam growth process via the pulsed laser deposition technique and to the complementary capabilities of high-power impulse magnetron sputtering, advanced multi-layer targets based on near-critical films with carefully controlled properties (e.g. density gradients over few microns length scales) can now be manufactured, with applications outreaching the field of laser-driven ion acceleration. Additionally, comprehensive numerical and theoretical work has allowed the design of dedicated experiments and a realistic table-top apparatus for laser-driven materials irradiation, ion beam analysis and neutron generation, that exploit a double-layer target to reduce the requirements for the laser system.
Laser-driven ion sources are interesting for many potential applications, from nuclear medicine to material science. A promising strategy to enhance both ion energy and number is given by Double-Layer Targets (DLTs), i.e. micrometric foils coated by a near-critical density layer. Optimization of DLT parameters for a given laser setup requires a deep and thorough understanding of the physics at play. In this work, we investigate the acceleration process with DLTs by combining analytical modeling of pulse propagation and hot electron generation together with Particle-In-Cell (PIC) simulations in two and three dimensions. Model results and predictions are confirmed by PIC simulations—which also provide numerical values to the free model parameters—and compared to experimental findings from the literature. Finally, we analytically find the optimal values for near-critical layer thickness and density as a function of laser parameters; this result should provide useful insights for the design of experiments involving DLTs.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.