Inorganic ceramic membranes have attracted much attention due to their advantages of long life, acid and alkali corrosion resistance, and easy cleaning, but they have not been widely used due to the high cost. In order to obtain a ceramic membrane with low cost and good performance, in this paper, loess-based ceramic membrane support was prepared by using loess as raw material, bauxite as aluminum source, dolomite as pore-forming agent and talc as plasticizer. . Response surface optimization was used to determine the optimal addition parameters of ingredients. In addition, the factors affecting the performance of the supports were analyzed in terms of material composition, microscopic morphology, and porosity. The results show that the addition of talc conduced to avoid the negative impact of the pore-forming effect of dolomite on the mechanical strength of the support, and the optimum proportioning parameters are 48.85 wt% of bauxite, 9.93 wt% of dolomite and 8 wt% of talc. Under this condition, the bending strength was 42.24 MPa, the pure water flux was 8323.73 L·m-2·h-1·MPa-1, and the average pore throat radius was 5.15 μm. The performance of the best sample reaches the application performance of porous ceramic supports, which provides a theoretical basis for the wide application of low-cost ceramic membrane supports.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.