Torsional forced-oscillation techniques have been used to measure the shear modulus and strain-energy dissipation on cylindrical specimens of a fine-grained granite, Delegate aplite. The specimens were subjected to thermal cycling and associated microcracking under varying conditions of confining pressure P c and argon pore-fluid pressure P f within the low-frequency saturated isobaric regime. Complementary transient-flow studies of in-situ permeability and volumetric measurements of connected crack porosity allowed the modulus measurements to be interpreted in terms of the density and interconnectivity of the thermally generated cracks. The modulus measurements indicate that newly generated thermal cracks are closed by a differential pressure, P c − P f , which ranges from ϳ120 to 160 MPa for temperatures of 300-600°C. This suggests crack aspect ratios on the order of 10 −3 . The covariation of in-situ permeability k and thermal crack density that we infer from the modulus deficit is consistent with percolation theory. There is a well-defined threshold at c ϳ 0.17, beyond which k increases markedly as ͑ − c ͒ , with ϳ 2. At lower crack densities, it is difficult to measure the sensitivity of shear modulus to variations of confining and pore pressures because pore-pressure equilibrium is approached so sluggishly. At temperatures beyond the percolation threshold, the modulus variation is a function of the effective pressure, P eff = P c − nP f , with the value of n increasing toward one with increasing crack connectivity.
Forced torsional oscillation techniques have been used to explore the seismic-frequency shear mode viscoelasticity of specimens of two crustal rocks (Cape Sorell quartzite and Delegate aplite), cycled between room temperature and 700°C under conditions of moderate confining pressure. The anisotropy and intergranular inhomogeneity of thermal expansivity in these materials give rise to large deviatoric stresses, resulting in thermal cracking at temperatures above a pressure-dependent threshold temperature, associated with the onset of very pronounced temperature sensitivity of the shear modulus, in general accord with the predictions of fracture mechanics models. For Delegate aplite in particular, the shear modulus behaves reproducibly during multiple thermal cycles at different confining pressures, consistent with the notion that the thermal cracks are of low aspect ratio (minimum/maximum dimension), and are therefore readily closed by the prevailing confining pressure once the thermal stresses are removed. Marked frequency-dependent dissipation of shear strain energy is observed on heating each rock to temperatures ] 500°C, although the attenuation varies significantly with prior thermal history, probably as a result of progressive dehydration and relaxation of deviatoric stresses. Temperature and pressure dependent crack densities for Delegate aplite have been estimated by comparison of the observed shear moduli with those expected for a crack-free aggregate. In parallel with the forced oscillation tests, measurements have been made of the rate at which (argon) pore pressure equilibrium is re-established following a perturbation. Combination of these results, which provide a proxy for permeability, with the inferred crack densities indicates that the variation of permeability with crack density is well described by a percolation model with a threshold crack density of 0.2.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.