This research was supported by European Commission Horizon 2020 Programme through project under G. A. number 810321, named Twinning coordination action for spreading excellence in Aerial Robotics-AeRoTwin [1] and through project under G. A. number 820434, named ENergy aware BIM Cloud Platform in a COst-effective Building REnovation Context-ENCORE [2] ABSTRACT This paper presents a LiDAR-equipped unmanned aerial vehicle (UAV) performing semiautonomous wind-turbine blade inspection which includes traversing to the blade tip and back, while keeping constant relative distance and heading to the blade plane. Plane detection is performed applying the RANSAC method on a subset of the gathered pointcloud. Utilizing the relative distance to the inferred plane as well as its normal vector, the UAV is able to maintain a constant distance and heading towards the plane while moving in parallel with it. The proposed procedure performs successful wind-turbine blade inspections with minimal operator involvement. Inspection results include high-resolution blade images as well as a 3D model of the wind-turbine structure. Finally, to show the feasibility of this approach, simulations are performed on a wind-turbine model and experimental results are presented for an outdoor single-blade inspection scenario both on a mock-up setup and a full-scale wind-turbine blade. It is worth noting that the system's adequacy has been fully validated in real conditions on an operational wind farm.

This paper investigates the use of LiDAR SLAM as a pose feedback for autonomous flight. Cartographer, LOAM and hdl graph SLAM are tested for this role. They are first compared offline on a series of datasets to see if they are capable of producing high-quality pose estimations in agile and long-range flight scenarios. The second stage of testing consists of integrating the SLAM algorithms into a cascade PID UAV control system and comparing the control system performance on step excitation signals and helical trajectories. The comparison is based on step response characteristics and several time integral performance criteria as well as the RMS error between planned and executed trajectory.

Periodic bridge inspections are required every several years to determine the state of a bridge. Most commonly, the inspection is performed using specialized trucks allowing human inspectors to review the conditions underneath the bridge, which requires a road closure. The aim of this paper was to use aerial manipulators to mount sensors on the bridge to collect the necessary data, thus eliminating the need for the road closure. To do so, a two-step approach is proposed: an unmanned aerial vehicle (UAV) equipped with a pressurized canister sprays the first glue component onto the target area; afterward, the aerial manipulator detects the precise location of the sprayed area, and mounts the required sensor coated with the second glue component. The visual detection is based on an RGB-D sensor and provides the target position and orientation. A trajectory is then planned based on the detected contact point, and it is executed through the adaptive impedance control capable of achieving and maintaining a desired force reference. Such an approach allows for the two glue components to form a solid bond. The described pipeline is validated in a simulation environment while the visual detection is tested in an experimental environment.

No abstract

In this paper we address the problem of path planning in an unknown environment with an aerial robot. The main goal is to safely follow the planned trajectory by avoiding obstacles. The proposed approach is suitable for aerial vehicles equipped with 3D sensors, such as LiDARs. It performs obstacle avoidance in real time and on an on-board computer. We present a novel algorithm based on the conventional Artificial Potential Field (APF) that corrects the planned trajectory to avoid obstacles. To this end, our modified algorithm uses a rotation-based component to avoid local minima. The smooth trajectory following, achieved with the MPC tracker, allows us to quickly change and re-plan the UAV trajectory. Comparative experiments in simulation have shown that our approach solves local minima problems in trajectory planning and generates more efficient paths to avoid potential collisions with static obstacles compared to the original APF method.