The projected increase in the use of compact fluorescent lamps (CFLs) motivates the development of methods to manage consumer exposure to mercury and its environmental release at the end of lamp life. This work characterizes the time-resolved release of mercury vapor from broken CFLs and from underlying substrates after removal of glass fragments to simulate cleanup. In new lamps, mercury vapor is released gradually in amounts that reach 1.3 mg or 30% of the total lamp inventory after four days. Similar time profiles but smaller amounts are released from spent lamps or from underlying substrates. Nanoscale formulations of S, Se, Cu, Ni, Zn, Ag, and WS2 are evaluated for capture of Hg vapor under these conditions and compared to conventional microscale formulations. Adsorption capacities range over 7 orders of magnitude, from 0.005 (Zn micropowder) to 188 000 μg/g (unstabilized nano-Se), depending on sorbent chemistry and particle size. Nanosynthesis offers clear advantages for most sorbent chemistries. Unstabilized nano-selenium in two forms (dry powder and impregnated cloth) was successfully used in a proof-of-principle test for the in situ, real-time suppression of Hg vapor escape following CFL fracture.

Current orthopedic implants have several problems that include poor osseointegration for extended periods of time, stress shielding and wear debris-associated bone cell death. In addition, numerous patients receive orthopedic implants as a result of bone cancer resection, yet current orthopedic materials were not designed to prevent either the occurrence or reoccurrence of cancer. The objective of this in vitro study was to create a new biomaterial which can both restore bone and prevent cancer growth at the implant-tissue interface. Elemental selenium was chosen as the biologically active agent in this study because of its known chemopreventive and chemotherapeutic properties. It was found that when selenite salts were reduced by glutathione in the presence of an immersed titanium substrate, elemental selenium nucleated and grew into adherent, hemispherical nanoclusters that formed a nanostructured composite surface. Three types of surfaces with different selenium surface densities on titanium were fabricated and confirmed by SEM images, AFM, and XPS profiles. Compared to conventional untreated titanium, a high-density selenium-doped surface inhibited cancerous bone cell proliferation while promoting healthy bone cell functions (including adhesion, proliferation, alkaline phosphatase activity and calcium deposition). These findings showed for the first time the potential of selenium nanoclusters as a chemopreventive titanium orthopedic material coating that can also promote healthy bone cell functions.

No abstract