A series of ZIF-derived Fe-N codoped carbon materials with a well-defined morphology, high surface area, tunable sizes and porous nanoframe structure was successfully prepared by synthesizing Fe-doped ZIF-8 through the assembly of Zn ions with 2-methylimidazole in the presence of iron(III) acetylacetonate, followed by pyrolysis at a high temperature and in an Ar atmosphere. The prepared optimum catalyst materials exhibited excellent activity for the oxygen reduction reaction (ORR) and outstanding durability in both acidic and alkaline solutions. We found that Fe doping during the ZIF-8 synthesis stage was crucial to achieve the materials' well-defined morphology, tunable size, good particle dispersion, and high performance. XPS revealed that Fe doping greatly enhanced the fractions of graphitic-N and pyridinic-N and decreased the fraction of oxidized-N. We suggest that the porosity and high surface area of the nanoframe structure originated from the metal-organic frameworks, the high dispersion of Fe in the nanoframe, and the enhanced proportions of active N species, all of which were responsible for the materials' significantly enhanced ORR performance.

A metalorganic gaseous doping approach for constructing nitrogen‐doped carbon polyhedron catalysts embedded with single Fe atoms is reported. The resulting catalysts are characterized using scanning transmission electron microscopy, X‐ray photoelectron spectroscopy, and X‐ray absorption spectroscopy; for the optimal sample, calculated densities of Fe–Nx sites and active N sites reach 1.75812 × 1013 and 1.93693 × 1014 sites cm‐2, respectively. Its oxygen reduction reaction half‐wave potential (0.864 V) is 50 mV higher than that of 20 wt% Pt/C catalyst in an alkaline medium and comparable to the latter (0.78 V vs 0.84 V) in an acidic medium, along with outstanding durability. More importantly, when used as a hydrogen–oxygen polymer electrolyte membrane fuel cell (PEMFC) cathode catalyst with a catalyst loading as low as 1 mg cm‐2 (compared with a conventional loading of 4 mg cm‐2), it exhibits a current density of 1100 mA cm‐2 at 0.6 V and 637 mA cm‐2 at 0.7 V, with a power density of 775 mW cm‐2, or 0.775 kW g–1 of catalyst. In a hydrogen–air PEMFC, current density reaches 650 mA cm‐2 at 0.6 V and 350 mA cm‐2 at 0.7 V, and the maximum power density is 463 mW cm‐2, which makes it a promising candidate for cathode catalyst toward high‐performance PEMFCs.

Electrocatalytic carbon dioxide reduction reaction (CO2RR) holds significant potential to promote carbon neutrality. However, the selectivity toward multicarbon products in CO2RR is still too low to meet practical applications. Here the authors report the delicate synthesis of three kinds of Ag–Cu Janus nanostructures with {100} facets (JNS‐100) for highly selective tandem electrocatalytic reduction of CO2 to multicarbon products. By controlling the surfactant and reduction kinetics of Cu precursor, the confined growth of Cu with {100} facets on one of the six equal faces of Ag nanocubes is realized. Compared with Cu nanocubes, Ag65–Cu35 JNS‐100 demonstrates much superior selectivity for both ethylene and multicarbon products in CO2RR at less negative potentials. Density functional theory calculations reveal that the compensating electronic structure and carbon monoxide spillover in Ag65–Cu35 JNS‐100 contribute to the enhanced CO2RR performance. This study provides an effective strategy to design advanced tandem catalysts toward the extensive application of CO2RR.

Developing efficient non-precious-metal catalysts to accelerate the sluggish oxygen reduction reaction (ORR) is highly desired but remains a great challenge. Herein, using 2D bimetallic Zn/Fe-MOF as the precursor and g-C3N4 as the nitrogen source and stabilizer, porous carbon nanosheets doped with large amounts of single/paired Fe atoms (3.89 wt %) and N (10.28 wt %) are successfully prepared. It is found that the addition of g-C3N4 plays a key role in achieving a high loading of Fe single/paired atoms, and the 2D nanosheet structure gives the materials a high surface area and highly porous structure, resulting in outstanding ORR catalytic activity in both alkaline and acidic solutions. Our optimal sample achieved half-wave potentials in alkaline and acid media of up to 0.86 and 0.79 V (vs reversible hydrogen electrode (RHE)), respectively, values 20 mV higher than a commercial Pt/C catalyst in an alkaline medium and only 60 mV lower than Pt/C in an acidic medium. Moreover, its ORR durability was superior to that of commercial Pt/C in both electrolytes. We found that almost all the doped Fe in the sample existed as single or paired atoms coordinated with N. This work may provide an effective strategy for preparing high-performance catalysts bearing single/paired atoms by using MOFs as precursors.

Efficient, low‐cost catalysts are desirable for the sluggish oxygen reduction reaction (ORR). Herein, UIO‐66‐NH2‐derived multi‐element (Fe, S, N) co‐doped porous carbon catalyst is reported, Fe/N/S‐PC, with an octahedral morphology, a well‐defined mesoporous structure, and highly dispersed doping elements, synthesized by a double‐solvent diffusion‐pyrolysis method (DSDPM). The morphology of the UIO‐66‐NH2 precursor is perfectly inherited by the derived carbon material, resulting in a high surface area, a well‐defined mesoporous structure, and atomic‐level dispersion of the doping elements. Fe/N/S‐PC demonstrates outstanding catalytic activity and durability for the ORR in both alkaline and acidic solutions. In 0.1 m KOH, its half‐potential reaches 0.87 V (vs reversible hydrogen electrode (RHE)), 30 mV more positive than that of a 20 wt% Pt/C catalyst. In 0.1 m HClO4, it reaches 0.785 V (vs RHE), only 65 mV less than that of Pt/C. The catalyst also exhibits excellent performance in acidic hydrogen/oxygen proton exchange membrane fuel cells. A membrane electrode assembly (MEA) with the catalyst as the cathode reaches 700 mA·cm‐2 at 0.6 V and a maximum power density of 553 mW·cm‐2, ranking it among the best MEAs with a nonprecious metal catalyst as the cathode.

The aprotic Li-CO 2 battery is emerging as a promising energy storage technology with the capability of CO 2 fixation and conversion. However, its practical applications are still impeded by the large overpotential. Herein, the general synthesis of a series of ultrathin 2D Ru-M (M = Co, Ni, and Cu) nanosheets by a facile one-pot solvothermal method is reported. As a proofof-concept application, the representative RuCo nanosheets are used as the cathode catalysts for Li-CO 2 batteries, which demonstrate a low charge voltage of 3.74 V, a small overpotential of 0.94 V, and hence a high energy efficiency of 75%. Ex/in situ studies and density functional theory calculations reveal that the excellent catalytic performance of RuCo nanosheets originates from the enhanced adsorption toward Li and CO 2 during discharge as well as the elevated electron interaction with Li 2 CO 3 during charge by the in-plane RuCo alloy structure. This work indicates the feasibility of boosting the electrochemical performance of Li-CO 2 batteries by in-plane metal alloy sites of ultrathin 2D alloy nanomaterials.

The development of effective bifunctional catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is significant for energy conversion systems, such as Li-air batteries, fuel cells, and water splitting technologies. Herein, a Chlorella-derived catalyst with a nestlike framework, composed of bamboolike nanotubes that encapsulate cobalt nanoparticles, has been prepared through a facile pyrolysis process. It achieves perfect bifunctional catalysis both in ORR and OER on a single catalyst. For our optimal catalyst Co/M-Chlorella-900, its ORR half-wave potential is positively shifted by 40 mV compared to that of a commercial Pt/C catalyst, and the overpotential at 10 mA cm for the OER is 23 mV lower than that of a commercial IrO/C catalyst in an alkaline medium. This superior bifunctional catalytic performance is benefited from the simultaneous increase of pyridinic N sites for ORR and graphitic N sites for OER. In addition, N-doped carbon-encapsulated Co nanoparticles improve both ORR and OER performance by forming new active centers. The unique nestlike carbon nanotube framework not only afforded highly dense ORR and OER active sites but also promoted the electron and mass transfer. Our catalyst also displays notable durability during the ORR and OER, making it promising for use in ORR/OER-related energy conversion systems.

No abstract