In this study, an investigation is undertaken to determine the effect of gate design parameters on the on-state characteristics (threshold voltage and gate turn-on voltage) of pGaN/AlGaN/GaN high electron mobility transistors (HEMTs). Design parameters considered are pGaN doping and gate metal work function. The analysis considers the effects of variations on these parameters using a TCAD model matched with experimental results. A better understanding of the underlying physics governing the operation of these devices is achieved with a view to enable better optimization of such gate designs.

No abstract

Similarly to the unipolar SiC Schottky diodes, AlGaN/GaN Schottky devices have been suggested to have a negligible reverse recovery current during turn-off and can therefore be switched at very high frequencies with low power losses [1-2]. This study aims to investigate this claim by comparing the reverse recovery characteristic of an AlGaN/GaN diode with that of a SiC diode and a fast recovery Si P-N diode for the same current (4 A) and voltage rating (700 V). TCAD models of a SiC Schottky diode and an AlGaN/GaN diode have been developed and calibrated against fabricated devices for a better physical understanding of the experimentally observed results. The analysis is based on the trade-off between on-state and reverse recovery parameters at both room and high temperatures. Experimental and TCAD results show that while the AlGaN/GaN heterostructure Schottky diode is expected to provide a significant improvement in switching performance when compared to the conventional bipolar Si P-N diodes, the SiC diode offers a more favourable trade-off between on-state and reverse recovery.

Abstract:With Gallium Nitride (GaN) device technology for power electronics applications being ramped up for volume production, an increasing amount of research is now focused on the performance of GaN power devices in circuits. In this study, an enhancement mode GaN high electron mobility transistor (HEMT) is switched in a clamped inductive switching configuration with the aim of investigating the source of oscillatory effects observed. These arise as a result of the increased switching speed capability of GaN devices compared to their silicon counterparts. The study identifies the two major mechanisms (Miller capacitance charge and parasitic common source inductance) that can lead to ringing behaviour during turn-off and considers the effect of temperature on the latter. Furthermore, the experimental results are backed by SPICE modelling to evaluate the contribution of different circuit components to oscillations. The study concludes with good design techniques that can suppress the effects discussed.

No abstract