ABSTRAKPerkembangan teknologi telah menunjukkan peningkatan yang cukup signifikan, terutama untuk bidang komunikasi. Hal ini terbukti dengan banyaknya media komunikasi baik itu nirkabel dan kabel. Pada penelitian ini dimanfaatkan cahaya tampak sebagai media dalam sistem komunikasi, dimana selama ini cahaya hanya digunakan sebagai penerangan saja. Visible Light Communication (VLC) adalah sebuah teknologi komunikasi yang memanfaatkan pancaran cahaya tampak dari lampu pada sistem komunikasi. Sistem komunikasi visible light ini terdiri dari pemancar dan penerima. Pemancar terdiri dari Light Emitting Dioda, audio transformator dan baterai, dan pada penerima terdiri dari solar cell dan photodioda, amplifier dan catu daya. Hal-hal yang dapat mempengaruhi hasil output sistem komunikasi adalah jarak, terang cahaya lampu pemancar dan cahaya luar. Pada penelitian ini, komunikasi menggunakan VLC dapat dilakukan pada jarak pengiriman data sebesar 2,5 m dan dengan range frekuensi 600 Hz sampai dengan 45 kHz dimana data dapat disalurkan dengan baik. ABSTRACTTechnological developments have shown a significant increase, especially in the field of communication. This is proved by the many communications media using both wireless and wired. This study utilized the visible light as a medium of communication system, which has been used as an illumination light only. Visible Light Communication (VLC) is a communication technology which utilize visible light emitted from the lamp in the communication system. The visible light communication system consists of a transmitter and receiver. The transmitter consists of a Light Emitting Diode, audio transformer and battery, and the receiver consists of a solar cell and a photodiode, amplifier and power supply. Things that can affect the output of the communication system is the distance, bright light and outdoor light. In the research, the results that obtained from this study is the data transmission distance of 2.5 m and a frequency range of 600 Hz to 45 kHz data can be routed properly.
The authentication, identification, and copyright protection can be obtained by constructing the digital image watermarking technique. Watermark robustness and imperceptibility account for the capability of the hidden watermark to survive the manipulation. The proposed paper is a robust algorithm for digital image watermarking with 3-level discrete wavelet transform (DWT) with some attacks method. The 3-level DWT method was used constants α=0.01 and 0.03 as a function of how depth the watermark inserts to the host image in the insertion and extraction process. The algorithm was evaluated using 8 bits per pixel (bpp) grayscale, 1024x1024 pixels for the host image, and 256x256 pixels for the watermark image. The method is also implemented some experimental with attacks such as gaussian, salt and pepper, blurring, and compression. The algorithm is relatively acceptable of good quality, achieves low-value mean squared error (MSE), high peak signals to noise ratio (PSNR), and structural similarity index metric (SSIM) value approach to 1. It is found that the highest image quality measurements by using α=0.03 with the attacking method of salt and pepper yield MSE=0.01, PSNR=45.6 dB and SSIM=0.95, respectively.
An optical fiber is a high-speed telecommunication transmission medium. Principally, an optical fiber is made of a very fine glass fiber material, which is able to transmit light waves using light reflection method on the surface of the fiber optics core. An underground installation of the fiber optics makes this device robust from external interferences. However, the fiber optic cable performance should always be checked to maintain performance during data transmission process. One way to test fiber optics cable performance is by using an Optical Time -Domain Reflectometer (OTDR) device. This device sends a light wave from one point of the fiber optics cable. The light wave then returns when reaching the other point of the fiber optic cable while carrying some measurement parameters especially the physical length and attenuation of a fiber optic cable. The evaluation of the fiber optics cable performance requires the preparation, installation, and configuration of the OTDR. In this paper, we conducted evaluation on the performances of fiber optics cable. The data generated by the performed evaluation indicated an occurring attenuation on the fiber optics cable along 64.402 km of its lengths.Abstrak-Serat optik merupakan sebuah media transmisi telekomunikasi berkecepatan tinggi. Pada dasarnya serat optik terbuat dari bahan serat kaca yang sangat halus, serat optik mampu mentransmisikan gelombang cahaya dengan metoda pemantulan cahaya pada dinding dari inti serat optik. Instalasi serat optik dengan metoda kabel tanam membuat perangkat ini sangat aman dari gangguan eksternal. Namun performa kabel serat optik harus selalu diperiksa untuk menjaga performa saat proses transmisi data. Salah satu cara yang digunakan untuk menguji performa kabel serat optik adalah menggunakan perangkat Optical Time -Domain Reflectometer (OTDR). Perangkat ini akan mengirimkan gelombang cahaya dari salah satu ujung kabel, kemudian kembali lagi saat mencapai ujung lain dari kabel serat optik tersebut dengan membawa beberapa parameter pengukuran terutama panjang fisik dan redaman dari suatu kabel serat optik. Pada pengujian performa kabel serat optik ini diperlukan tahap persiapan, instalasi, dan konfigurasi dari sebuah OTDR. Data yang dihasilkan dari pengujian berupa panjang fisik yang menunjukkan lokasi terjadinya redaman pada kabel serat optik sepanjang 64,402 Km.
Dalam teknologi masa kini, sebuah sistem terbentuk dari beberapa subsistem. Salah satu bagian subsistem yang sangat penting adalah filter. Filter didefinisikan sebagai proses atau rangkaian yang melewatkan pita frekuensi tertentu yang diinginkan dan meredam pita frekuensi lainnya. Dalam penelitian ini digunakan jenis respon frekuensi Elliptic dan Bessel. Simulasi dilakukan dengan menggunakan software Matlab dengan memasukan frekuensi passband, frekuensi stopband, ripple passband, dan stopband attenuation yang telah dirancang. Dengan frekuensi sampling sebesar 15000 Hz, frekuensi passband sebesar 3000 Hz, frekuensi stopband sebesar 3500 Hz untuk Elliptic dan 5000 Hz untuk Bessel. Setelah simulasi dilakukan implementasi filter dengan parameter yang sama menggunakan DSK TMS320C6713 dengan bantuan software CCS. Parameter pengujian dari implementasi filter adalah respon magnitude, frekuensi cut-off, bandwidth, dan faktor kualitas dengan hasil simulasi yanng tidak menunjukan perbedaan yang signifikan. Memory yang digunakan pada DSK TMS320C6713 sebesar 2782 Bytes dari 16 MB.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.