We report on GCaMP-Rs, a new family of genetically encoded ratiometric calcium indicators that extend the virtues of the GCaMP proteins to ratiometric measurements. We have engineered a tandem construct of calcium-dependent GCaMP and calcium-independent mCherry fluorescent proteins. The tandem design assures that the two proteins localize in the same cellular compartment(s) and facilitates pixelwise ratiometric measurements; however, Förster resonance energy transfer (FRET) between the fluorophores reduces brightness of the sensor by up to half (depending on the GCaMP variant). To eliminate FRET, we introduced a rigid α-helix, the ER/K helix, between GCaMP and mCherry. Avoiding FRET significantly increases the brightness (notably, even at low calcium concentrations), the signal-to-noise ratio, and the dynamic range.

The force-generating mechanism of dynein differs from the forcegenerating mechanisms of other cytoskeletal motors. To examine the structural dynamics of dynein's stepping mechanism in real time, we used polarized total internal reflection fluorescence microscopy with nanometer accuracy localization to track the orientation and position of single motors. By measuring the polarized emission of individual quantum nanorods coupled to the dynein ring, we determined the angular position of the ring and found that it rotates relative to the microtubule (MT) while walking. Surprisingly, the observed rotations were small, averaging only 8.3°, and were only weakly correlated with steps. Measurements at two independent labeling positions on opposite sides of the ring showed similar small rotations. Our results are inconsistent with a classic power-stroke mechanism, and instead support a flexible stalk model in which interhead strain rotates the rings through bending and hinging of the stalk. Mechanical compliances of the stalk and hinge determined based on a 3.3-μs molecular dynamics simulation account for the degree of ring rotation observed experimentally. Together, these observations demonstrate that the stepping mechanism of dynein is fundamentally different from the stepping mechanisms of other well-studied MT motors, because it is characterized by constant small-scale fluctuations of a large but flexible structure fully consistent with the variable stepping pattern observed as dynein moves along the MT.ynein is a molecular motor that walks processively toward the minus end of microtubules (MTs) in an ATP-dependent manner (1-3). Axonemal dyneins drive the motility of eukaryotic cilia and flagella, whereas cytoplasmic dynein is responsible for a wide range of functions within eukaryotic cells, including the retrograde transport of cargo such as autophagosomes in neurons (4), alignment of the mitotic spindle (5, 6), and chromosome segregation during mitosis (7). Disruption of dynein-mediated neuronal transport has been implicated in neurodegeneration (8), and mutations in dynein and dynein-associated proteins can cause a range of diseases, including spinal muscular atrophy (9, 10), lissencephaly (11) and Charcot-Marie-Tooth disease type 2 (reviewed in ref. 12). Despite the importance of dynein function, the mechanism by which dynein walks along the MT is not yet well understood.The motor domains of dynein are formed from six concatenated AAA domains, interrupted by a long, antiparallel, coiled-coil stalk that emerges from AAA4 and terminates in the microtubulebinding domain (MTBD) and the buttress that extends from AAA5 and is thought to stabilize the stalk (13,14). Two motor domains form a dimer via their N-terminal tails (2, 3). ATP binding and hydrolysis drive dynein mechanochemistry; the binding of ATP to AAA1 induces a conformational change leading to dissociation of the MTBD from the MT. Hydrolysis on the dissociated head induces a primed conformation that then rebinds to the MT. The forward step, or power stroke,...

Fluorescence resonance energy transfer (FRET) provides a powerful means to study protein conformational changes. However, the incorporation of an exogenous FRET pair into a protein could lead to undesirable structural perturbations of the native fold. One of the viable strategies to minimizing such perturbations is to use non-natural amino acid based FRET pairs. Previously we have shown that p-cyanophenylalanine (Phe CN ) and tryptophan (Trp) constitute such a FRET pair, useful for monitoring protein folding-unfolding transitions. Herein, we further show that 7-azatryptophan (7AW) and 5-hydroxytryptophan (5HW) can also serve as a FRET acceptor to Phe CN , and the resultant FRET pairs offer certain advantages over Phe CN -Trp. For example, the fluorescence spectrum of 7AW is sufficiently separated from that of Phe CN , making it straightforward to decompose the FRET spectrum into donor and acceptor contributions. Moreover, we show that Phe CN , Trp and 7AW can be used together to form a multi-FRET system, allowing more structural information to be extracted from a single FRET experiment. The applicability of these FRET systems is demonstrated in a series of studies wherein they are employed to monitor the urea-induced unfolding transitions of the villin headpiece subdomain (HP35), a designed ββα motif (BBA5), and the human Pin1 WW domain.

The subdomains of macromolecules often undergo large orientation changes during their catalytic cycles that are essential for their activity. Tracking these rearrangements in real time opens a powerful window into the link between protein structure and functional output. Site-specific labeling of individual molecules with polarized optical probes and measuring their spatial orientation can give insight into the crucial conformational changes, dynamics, and fluctuations of macromolecules. Here we describe the range of single molecule optical technologies that can extract orientation information from these probes, we review the relevant types of probes and labeling techniques, and we highlight the advantages and disadvantages of these technologies for addressing specific inquiries.

Our understanding of molecular motor function has been greatly improved by the development of imaging modalities, which enable real-time observation of their motion at the single-molecule level. Here, we describe the use of a new method, interferometric scattering microscopy, for the investigation of motor protein dynamics by attaching and tracking the motion of metallic nanoparticle labels as small as 20 nm diameter. Using myosin-5, kinesin-1, and dynein as examples, we describe the basic assays, labeling strategies, and principles of data analysis. Our approach is relevant not only for motor protein dynamics but also provides a general tool for single-particle tracking with high spatiotemporal precision, which overcomes the limitations of single-molecule fluorescence methods.

Protein kinases achieve substrate selective phosphorylation through their conformational flexibility and dynamic interaction with the substrate. Designing substrate selective or kinase selective small molecule inhibitors remains a challenge because of a lack of understanding of the dynamic mechanism by which substrates are selected by the kinase. Using a combination of all-atom molecular dynamics simulations and FRET sensors, we have delineated an allosteric mechanism that results in interaction among the DFG motif, G-loop, and activation loop and structurally links the nucleotide and substrate binding interfaces in protein kinase Cα and three other Ser/Thr kinases. ATP-competitive staurosporine analogues engage this allosteric switch region located just outside the ATP binding site to displace substrate binding to varying degrees. These inhibitors function as bitopic ligands by occupying the ATP binding site and interacting with the allosteric switch region. The conserved mechanism identified in this study can be exploited to select and design bitopic inhibitors for kinases.

We developed methods to solubilize, coat, and functionalize with NeutrAvidin elongated semiconductor nanocrystals (quantum nanorods, QRs) for use in single molecule polarized fluorescence microscopy. Three different ligands were compared with regard to efficacy for attaching NeutrAvidin using the “zero-length cross-linker” 1-ethyl-3-[3-(dimethylamino)propyl]-carbodiimide (EDC). Biotin-4-fluorescene (B4F), a fluorophore that is quenched when bound to avidin proteins, was used to quantify biotin binding activity of the NeutrAvidin coated QRs and biotin binding activity of commercially available streptavidin coated quantum dots (QDs). All three coating methods produced QRs with NeutrAvidin coating density comparable to the streptavidin coating density of the commercially available quantum dots (QDs) in the B4F assay. One type of QD available from the supplier (ITK QDs) exhibited ~5-fold higher streptavidin surface density compared to our QRs, whereas the other type of QD (PEG QDs) had 5-fold lower density. The number of streptavidins per QD increased from ~7 streptavidin tetramers for the smallest QDs emitting fluorescence at 525 nm (QD525) to ~20 tetramers for larger, longer wavelength QDs (QD655, QD705, and QD800). QRs coated with NeutrAvidin using mercaptoundecanoicacid (MUA) and QDs coated with streptavidin bound to biotinylated cytoplasmic dynein in single molecule TIRF microscopy assays, whereas Poly(maleic anhydride-alt-1-ocatdecene) (PMAOD) or glutathione (GSH) QRs did not bind cytoplasmic dynein. The coating methods require optimization of conditions and concentrations to balance between substantial NeutrAvidin binding vs tendency of QRs to aggregate and degrade over time.

The eukaryotic kinase domain has multiple intrinsically disordered regions whose conformation dictates kinase activity. Small molecule kinase inhibitors (SMKIs) rely on disrupting the active conformations of these disordered regions to inactivate the kinase. While SMKIs are selected for their ability to cause this disruption, the allosteric effects of conformational changes in disordered regions is limited by a lack of dynamic information provided by traditional structural techniques. In this study, we integrated multiscale molecular dynamics simulations with FRET sensors to characterize a novel allosteric mechanism that is selectively triggered by SMKI binding to the protein kinase Cα domain. The indole maleimide inhibitors BimI and sotrastaurin were found to displace the Gly-rich loop (G-loop) that normally shields the ATP-binding site. Displacement of the G-loop interferes with a newly identified, structurally conserved binding pocket for the C1a domain on the N lobe of the kinase domain. This binding pocket, in conjunction with the N-terminal regulatory sequence, masks a diacylglycerol (DAG) binding site on the C1a domain. SMKI-mediated displacement of the G-loop released C1a and exposed the DAG binding site, enhancing protein kinase Cα translocation both to synthetic lipid bilayers and to live cell membranes in the presence of DAG. Inhibitor chemotype determined the extent of the observed allosteric effects on the kinase domain and correlated with the extent of membrane recruitment. Our findings demonstrate the allosteric effects of SMKIs beyond the confines of kinase catalytic conformation and provide an integrated computational-experimental paradigm to investigate parallel mechanisms in other kinases.