The present paper theoretically demonstrates coherent thermal emission in the infrared region by exciting magnetic polaritons between metallic gratings and an opaque metallic film, separated by a dielectric spacer. The coupling of the metallic strips and the film induces a magnetic response that is characterized by a negative permeability and positive permittivity. On the other hand, the metallic film intrinsically exhibits a negative permittivity and positive permeability in the near infrared. This artificial structure is equivalent to a pair of single-negative materials. By exciting surface magnetic polaritons, large emissivity peaks can be achieved at the resonance frequencies and are almost independent of the emission angle. The resonance frequency of the magnetic response can be predicted by an analogy to an inductor and capacitor circuit. The proposed structure can be easily constructed using micro/nanofabrication.
Applications utilizing solar energy are being actively developed due to increasing demand for environmentally friendly and sustainable energy solutions. The sun is a source of tremendous energy spanning from ultraviolet to infrared wavelengths, with the maximum energy in the visible range, corresponding to a blackbody temperature of 5780 K. [ 1 ] It is estimated that the amount of solar energy reaching Earth's surface is enough to Effi cient absorption of solar radiation is desired for the renewable energy sector, such as solar thermophotovoltaics and solar thermal applications. In order to minimize thermal re-radiation, wavelength-selective devices are required. Absorbers with structured surfaces are attractive because they derive their electromagnetic properties to a greater extent from their geometry and to a lesser extent from the intrinsic properties of the constituent materials. Thus, they offer greater fl exibility in the design and control of absorber features and can be tailored to suit requirements. This article reviews various classes of patterned structures: photonic crystals, metal-dielectric-metal slab arrays, metamaterials, and nanostructures operating in the visible and infrared wavelength ranges. Operation requirements, design principles and underlying physical phenomena, material and temperature considerations, as well as fabrication methods are discussed. Recent progress in achieving various desirable absorber features, such as broadband and multiband operation, polarization and angle independence, fl exibility, and tunability is presented. Suggestions are also given regarding future research directions.
The capability of manipulating heat flow has promising applications in thermal management and thermal circuits. In this Letter, we report strong thermal rectification effect based on the near-field thermal radiation between silicon dioxide (SiO2) and a phase transition material, vanadium dioxide (VO2), separated by nanometer vacuum gaps under the framework of fluctuational electrodynamics. Strong coupling of surface phonon polaritons between SiO2 and insulating VO2 leads to enhanced near-field radiative transfer, which on the other hand is suppressed when VO2 becomes metallic, resulting in thermal rectification. The rectification factor is close to 1 when vacuum gap is at 1 μm and it increases to almost 2 at sub-20-nm gaps when emitter and receiver temperatures are set to 400 and 300 K, respectively. Replacing bulk SiO2 with a thin film of several nanometers, rectification factor of 3 can be achieved when the vacuum gap is around 100 nm.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.