Carbonate reservoirs typically have complex pore structures, so the production wells typically have high production in the early production stage, but they decline rapidly. It is highly challenging to achieve accurate interpretation results. In this paper, a new and practical methodology for production data analysis of fractured and fractured-vuggy carbonate reservoirs is proposed. Firstly, analytical solutions to characterize the different multipore media and simulate transient production behavior of fractured and fractured-vuggy carbonate reservoirs during the transient flow regime are presented. Then, a new function f q D and f ′ q D that related to the dimensionless production rate is introduced, and a series of new decline type curves are drawn to make a clear observation of different flow regimes. In addition, the effects of the storativity ratio, interporosity flow coefficient, skin factor, and dimensionless radial distance of external boundary on production performance are also analyzed. Finally, two example wells from the fractured and fractured-vuggy carbonate reservoirs are used to perform rate decline analysis with both the Blasingame type curves and the new type curves. The validation of the new method is demonstrated in comparison to the results of well test interpretation. The results show that the curves of 1 / f ′ q D vs. t D are ∧ -shaped for dual-porosity reservoirs and M -shaped for triple porosity reservoirs and also indicate that the interpreted parameters such as permeability, skin factor, storativity ratio, and interporosity flow coefficient using new decline type curves are aligned well test interpretation. In correlation with other traditional well test analysis, this approach effectively reduces the multisolution probability of interpretation.
For unconsolidated sanding wells, the interaction between sanding and pressure-dependent permeability as oil is produced from the bottom of the well puts higher challenges on the evaluation and prediction of well performance. Therefore, it is essential to assess the oil well performance considering the synthetic effect of stress-sensitive and produced sand particles. In this paper, a new stress-sensitive factor is proposed to describe the relationship between stress and permeability in the numerical model. Also, based on the rectangular plastic region by the sand migration near the perforation, a quantitative expression of the sanding area for numerical model calculation was established. Combined with a quantitative description of these two key parameters, a sand-producing horizontal well model is established to evaluate production performance. In this model, the area of sand production near the wellbore is considered as the inner area with increased permeability while the outer zone remains the original reservoir. Besides, the model was verified by the production data from the sand-producing horizontal well in the oilfield. Furthermore, sensitivity parameters (such as stress sensitivity, the size of sanding zone, well location, and reservoir boundaries) are used to make the analysis of well productivity, which provides a theoretical basis for petroleum engineers to adjust the development plan for horizontal wells in the weakly consolidated sandstone reservoir.
Fracturing and water flooding have been popular technologies to achieve the effective development of tight oil reservoirs in recent years. However, in the late stage of production, the oil recovery rate declines with a rapid increase in the water cut. Water huff-puff could improve reservoir energy; however, the displacement and imbibition in the micronano pore throat and fracture systems are complex processes with unclear characteristics and position. Therefore, it is urgent to study the coupling mechanisms of oil-water displacement and imbibition in tight oil reservoirs. In this work, based on the phase field method of COMSOL Multiphysics software, we establish a two-dimensional microscopic numerical simulation model of the pore-fracture system, and carry out displacementimbibition simulation programs of different injection media (water and surfactant) and injection methods (displacement, displacement-imbibition). By comparing the saturations and pressure distributions of different simulation programs, we analyze the changes in the oil-water interface, and summarize the action conditions of counter-current imbibition and pore throat limit. Finally, reasonable development suggestions are proposed for tight oil reservoirs.
In this study, we present a hybrid model coupled with two-set nodes Green element method (GEM) and embedded discrete fracture model (EDFM) for capturing the effect of transient flow in inhomogeneous fractured porous media. GEM is an excellent advanced algorithm, which can solve nonlinear problems in heterogeneous media. That is also an obvious advantage of GEM against the original boundary element method (BEM). The novel GEM has double nodes of pressure and flux and it is an improvement of classical GEM, which has a second-order precision and fits for triangle structured grids. In the place of adopting the linear flow approximation for original EDFM, the interflows between local triangle matrix grids and fracture elements are derived using the novel GEM, which has higher accuracy than those in previous EDFMs. Consequently, the modified hybrid model can indeed calculate the pressure and flux distribution of transient flow in multifracture porous media. Three numerical cases are presented to show the practicability of our novel model which include (i) multistage fractured horizontal well, (ii) heterogeneous fractured porous media, and (iii) complex fracture networks (CFNs) in an unconventional reservoir.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.