The assembly of semiconductor nanowires and carbon nanotubes into nanoscale devices and circuits could enable diverse applications in nanoelectronics and photonics. Individual semiconducting nanowires have already been configured as field-effect transistors, photodetectors and bio/chemical sensors. More sophisticated light-emitting diodes (LEDs) and complementary and diode logic devices have been realized using both n- and p-type semiconducting nanowires or nanotubes. The n- and p-type materials have been incorporated in these latter devices either by crossing p- and n-type nanowires or by lithographically defining distinct p- and n-type regions in nanotubes, although both strategies limit device complexity. In the planar semiconductor industry, intricate n- and p-type and more generally compositionally modulated (that is, superlattice) structures are used to enable versatile electronic and photonic functions. Here we demonstrate the synthesis of semiconductor nanowire superlattices from group III-V and group IV materials. (The superlattices are created within the nanowires by repeated modulation of the vapour-phase semiconductor reactants during growth of the wires.) Compositionally modulated superlattices consisting of 2 to 21 layers of GaAs and GaP have been prepared. Furthermore, n-Si/p-Si and n-InP/p-InP modulation doped nanowires have been synthesized. Single-nanowire photoluminescence, electrical transport and electroluminescence measurements show the unique photonic and electronic properties of these nanowire superlattices, and suggest potential applications ranging from nano-barcodes to polarized nanoscale LEDs.

With advances in exfoliation and synthetic techniques, atomically thin films of semiconducting transition metal dichalcogenides have recently been isolated and characterized. Their two-dimensional structure, coupled with a direct band gap in the visible portion of the electromagnetic spectrum, suggests suitability for digital electronics and optoelectronics. Toward that end, several classes of high-performance devices have been reported along with significant progress in understanding their physical properties. Here, we present a review of the architecture, operating principles, and physics of electronic and optoelectronic devices based on ultrathin transition metal dichalcogenide semiconductors. By critically assessing and comparing the performance of these devices with competing technologies, the merits and shortcomings of this emerging class of electronic materials are identified, thereby providing a roadmap for future development.

Semiconductor heterostructures with modulated composition and/or doping enable passivation of interfaces and the generation of devices with diverse functions. In this regard, the control of interfaces in nanoscale building blocks with high surface area will be increasingly important in the assembly of electronic and photonic devices. Core-shell heterostructures formed by the growth of crystalline overlayers on nanocrystals offer enhanced emission efficiency, important for various applications. Axial heterostructures have also been formed by a one-dimensional modulation of nanowire composition and doping. However, modulation of the radial composition and doping in nanowire structures has received much less attention than planar and nanocrystal systems. Here we synthesize silicon and germanium core-shell and multishell nanowire heterostructures using a chemical vapour deposition method applicable to a variety of nanoscale materials. Our investigations of the growth of boron-doped silicon shells on intrinsic silicon and silicon-silicon oxide core-shell nanowires indicate that homoepitaxy can be achieved at relatively low temperatures on clean silicon. We also demonstrate the possibility of heteroepitaxial growth of crystalline germanium-silicon and silicon-germanium core-shell structures, in which band-offsets drive hole injection into either germanium core or shell regions. Our synthesis of core-multishell structures, including a high-performance coaxially gated field-effect transistor, indicates the general potential of radial heterostructure growth for the development of nanowire-based devices.

Unencapsulated, exfoliated black phosphorus (BP) flakes are found to chemically degrade upon exposure to ambient conditions. Atomic force microscopy, electrostatic force microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy are employed to characterize the structure and chemistry of the degradation process, suggesting that O2 saturated H2O irreversibly reacts with BP to form oxidized phosphorus species. This interpretation is further supported by the observation that BP degradation occurs more rapidly on hydrophobic octadecyltrichlorosilane self-assembled monolayers and on HSi(111), versus hydrophilic SiO2. For unencapsulated BP field-effect transistors, the ambient degradation causes large increases in threshold voltage after 6 hours in ambient, followed by a ~10 3 decrease in FET current on/off ratio and mobility after 48 hours. Atomic layer deposited AlOx overlayers effectively suppress ambient degradation, allowing encapsulated BP FETs to maintain high on/off ratios of ~10 3 and mobilities of ~100 cm 2 V -1 s -1 for over two weeks in ambient. This work shows that the ambient degradation of BP can be managed effectively when the flakes are sufficiently passivated. In turn, our strategy for enhancing BP environmental stability will accelerate efforts to implement BP in electronic and optoelectronic applications. On increased ambient exposure, the bubble density eventually decreases, evolving into wider and taller bubbles. These bubbles occur in BP, regardless of flake thickness (Fig. S2). In Fig. 2, we therefore use X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy to assess whether chemical modifications, such as the formation of additional chemical bonds or a change in oxidation state, occur in BP upon ambient exposure. Fig. 2A shows P 2p core level XPS spectra of as-exfoliated BP flakes on SiO2 for 0 hrs, 13 hrs, 1, day, 2 days, and 3 days, respectively, of ambient exposure. All spectra are calibrated to the binding energy of adventitious carbon (284.8 eV), and electrostatic charging is compensated using an Ar + flood gun (see Supporting Information for details). At 0 hrs of ambient exposure (black spectrum in Fig. 2A), the exfoliated BP exhibits a single spin-orbit split doublet at ~130 eV, consistent with previous XPS measurements on BP bulk crystals. 27, 28 Note that these spectra do not match those for red phosphorus (~129.8 eV), white phosphorus, or amorphous P-H. 27 A broad, s photoelectronSi satellite from the substrate 300 nm SiO2 appears at ~126.5 eV. After 13 hrs of ambient exposure (maroon spectrum), the full-width at half-maximum (FWHM) for the BP increases, characteristic of some loss of long range order. After 1, 2, and 3 days in ambient (green, navy, and gray spectra, respectively), an additional doublet appears at ~134 eV. This feature is best assigned to phosphate species, 9, 29 although many oxidized phosphorus compounds exhibit peaks near ~134-135 eV. 30, 31 The la...

Miniaturization in electronics through improvements in established "top-down" fabrication techniques is approaching the point where fundamental issues are expected to limit the dramatic increases in computing seen over the past several decades. Here we report a "bottom-up" approach in which functional device elements and element arrays have been assembled from solution through the use of electronically well-defined semiconductor nanowire building blocks. We show that crossed nanowire p-n junctions and junction arrays can be assembled in over 95% yield with controllable electrical characteristics, and in addition, that these junctions can be used to create integrated nanoscale field-effect transistor arrays with nanowires as both the conducting channel and gate electrode. Nanowire junction arrays have been configured as key OR, AND, and NOR logic-gate structures with substantial gain and have been used to implement basic computation.