Novel potentially biobased aliphatic-aromatic copolyesters poly(butylene succinate-co-butylene furandicarboxylate) (PBSFs) in full composition range were successfully synthesized from 2,5-furandicarboxylic acid (FA), succinic acid (SA), and 1,4-butanediol (BDO) via an esterification and polycondensation process using tetrabutyl titanate (TBT) or TBT/La(acac)(3) as catalyst. The copolyesters were characterized by size exclusion chromatography (SEC), Fourier transform infrared (FTIR), (1)H NMR, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), and their tensile properties were also evaluated. The weight average molecular weight (M(w)) ranges from 39,000 to 89,000 g/mol. The copolyesters are random copolymers whose composition is well controlled by the feed ratio of the diacid monomers. PBSFs have excellent thermal stability. The glass transition temperature (T(g)) increases continuously with φ(BF) and agrees well with the Fox equation. The crystallizability and T(m) decrease with increasing butylene furandicarboxylate (BF) unit content (φ(BF)) from 0 to 40 mol %, but rise again at φ(BF) of 50-100 mol %. Consequently, the tensile modulus and strength decrease, and the elongation at break increases with φ(BF) in the range of 0-40 mol %. At higher φ(BF), the modulus and strength increase and the ultimate elongation decreases. Thus, depending on φ(BF), the structure and properties of PBSFs can be tuned ranging from crystalline polymers possessing good tensile modulus (360-1800 MPa) and strength (20-35 MPa) to nearly amorphous polymer of low T(g) and high elongation (~600%), and therefore they may find applications in thermoplastics as well as elastomers or impact modifiers.
In vitro degradation of seven three-dimensional porous scaffolds composed of PLGA85/15, a very useful poly(D,L-lactide-co-glycolide), was performed in phosphate-buffered saline solution at 37 degrees C up to 26 weeks, and effects of porosity (80-95%) and pore size (50-450 mum) on the degradation of the scaffolds were investigated. A series of quantities were measured during the degradation processes: molecular weight and its distribution of PLGA; compressive strength and modulus; and weight, dimension, and porosity of scaffolds. In all of cases with different pore morphologies, the degradation processes obeyed a three-stage model. Scaffolds with a higher porosity or a smaller pore size degraded more slowly than and thus outlasted those with a lower porosity or a larger pore size. The effects are both attributed to a wall effect and a surface area effect because the scaffolds with lower porosities or larger pores possess thicker pore walls and smaller surface area, which depress the diffusion of acidic degradation products and thus results in a stronger acid-catalyzed hydrolysis. This work suggests that, in designing a tissue-engineering scaffold composed of PLGA and adjusting its degradation rate, the effects of pore morphologies should be taken into consideration in addition to those of chemical composition and condensed state of raw materials.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.