Large-area and high-quality 2D transition metal tellurides are synthesized by the chemical vapor deposition method. The as-grown WTe maintains two different stacking sequences in the bilayer, where the atomic structure of the stacking boundary is revealed by scanning transmission electron microscopy. The low-temperature transport measurements reveal a novel semimetal-to-insulator transition in WTe layers and an enhanced superconductivity in few-layer MoTe .

In this work, we have demonstrated the synthesis of high-quality monolayered α-In2Se3 using physical vapor deposition method under atmospheric pressure. The quality of the In2Se3 atomic layers has been confirmed by complementary characterization technologies such as Raman/photoluminescence spectroscopies and atomic force microscope. The atomically resolved images have been obtained by the annular dark-field scanning transmission electron microscope. The field-effect transistors have been fabricated using the atomically layered In2Se3 and exhibit p-type semiconducting behaviors with the mobility up to 2.5 cm(2)/ Vs. The In2Se3 layers also show a good photoresponsivity of 340A/W, as well as 6 ms response time for the rise and 12 ms for the fall. These results make In2Se3 atomic layers a promising candidate for the optoelectronic and photosensitive device applications.

Organic–inorganic metal halide perovskites have recently demonstrated outstanding efficiencies in photovoltaics as well as highly promising performances for a wide range of optoelectronic applications such as lasing, light emission, optical detectors, and even for radiation detection. Key to the realization of functional perovskite micro/nanosystems on the ubiquitous silicon optoelectronics platform is through sophisticated lithography. Despite the rapid progress made in halide perovskite lasing, direct lithographic patterning of perovskite films to form optical cavities on conventional substrates remains extremely challenging. This study realizes room‐temperature high‐quality factor whispering‐gallery‐mode lasing (Q ≈ 1210) from patterned lead halide perovskite microplatelets fabricated in periodic arrays on silicon substrate with micropatterned BN film as the buffer layer. By varying the size of the platelets, modal selectivity for single mode lasing can be achieved with different cavity sizes or by simply breaking the structural symmetry of the cavity through designing the pattern. Importantly, this work demonstrates a straightforward, versatile bottom‐up scalable strategy to realize high‐quality periodic perovskite arrays with variable cavity sizes for large‐area light‐emitting and optical gain applications.

High-quality organic and inorganic van der Waals (vdW) solids are realized using methylammonium lead halide (CH3 NH3 PbI3 ) as the organic part (organic perovskite) and 2D inorganic monolayers as counterparts. By stacking on various 2D monolayers, the vdW solids exhibit dramatically different light emissions. Futhermore, organic/h-BN vdW solid arrays are patterned for red-light emission.

III–IV layered materials such as indium selenide have excellent photoelectronic properties. However, synthesis of materials in such group, especially with a controlled thickness down to monolayer, still remains challenging. Herein, we demonstrate the successful synthesis of monolayer InSe by physical vapor deposition (PVD) method. The high quality of the sample was confirmed by complementary characterization techniques such as Raman spectroscopy, atomic force microscopy (AFM) and high resolution annular dark field scanning transmission electron microscopy (ADF-STEM). We found the co-existence of different stacking sequence (β- and γ-InSe) in the same flake with a sharp grain boundary in few-layered InSe. Edge reconstruction is also observed in monolayer InSe, which has a distinct atomic structure from the bulk lattice. Moreover, we discovered that the second-harmonic generation (SHG) signal from monolayer InSe shows large optical second-order susceptibility that is 1–2 orders of magnitude higher than MoS2, and even 3 times of the largest value reported in monolayer GaSe. These results make atom-thin InSe a promising candidate for optoelectronic and photosensitive device applications.

Internal magnetic moments induced by magnetic dopants in MoS2 monolayers are shown to serve as a new means to engineer valley Zeeman splitting (VZS). Specifically, successful synthesis of monolayer MoS2 doped with the magnetic element Co is reported, and the magnitude of the valley splitting is engineered by manipulating the dopant concentration. Valley splittings of 3.9, 5.2, and 6.15 meV at 7 T in Co‐doped MoS2 with Co concentrations of 0.8%, 1.7%, and 2.5%, respectively, are achieved as revealed by polarization‐resolved photoluminescence (PL) spectroscopy. Atomic‐resolution electron microscopy studies clearly identify the magnetic sites of Co substitution in the MoS2 lattice, forming two distinct types of configurations, namely isolated single dopants and tridopant clusters. Density functional theory (DFT) and model calculations reveal that the observed enhanced VZS arises from an internal magnetic field induced by the tridopant clusters, which couples to the spin, atomic orbital, and valley magnetic moment of carriers from the conduction and valence bands. The present study demonstrates a new method to control the valley pseudospin via magnetic dopants in layered semiconducting materials, paving the way toward magneto‐optical and spintronic devices.

Organolead halide perovskites (e.g., CH3NH3PbI3) have caught tremendous attention for their excellent optoelectronic properties and applications, especially as the active material for solar cells. Perovskite crystal quality and dimension is crucial for the fabrication of high‐performance optoelectronic and photovoltaic devices. Herein the controlled synthesis of organolead halide perovskite CH3NH3PbI3 nanoplatelets on SiO2/Si substrates is investigated via a convenient two‐step vapor transport deposition technique. The thickness and size of the perovskite can be well‐controlled from few‐layers to hundred nanometers by altering the synthesis time and temperature. Raman characterizations reveal that the evolutions of Raman peaks are sensitive to the thickness. Furthermore, from the time‐resolved photoluminescence measurements, the best optoelectronic performance of the perovskite platelet is attributed with thickness of ≈30 nm to its dominant longest lifetime (≈4.5 ns) of perovskite excitons, which means lower surface traps or defects. This work supplies an alternative to the synthesis of high‐quality organic perovskite and their possible optoelectronic applications with the most suitable materials.

There is an increasing demand for composite resins with both strong antibacterial activity and satisfactory mechanical properties. This study tested the hypothesis that the new antibacterial agent tetrapod-like zinc oxide whisker (T-ZnOw) could simultaneously enhance the antibacterial activity and mechanical properties of a two-component composite resin. The antibacterial activities of the materials were assessed by the broth dilution test and direct contact test. Optical microscopy, scanning electron microscopy, and measurements of the flexural strength, compressive strength, and diametral tensile strength were carried out for mechanical characterization. The results revealed that T-ZnOw provided the resin with strong antibacterial activity and improved mechanical properties in all tested groups. However, the antibacterial activity of the resin with 10% T-ZnOw in the powder component significantly decreased after aging treatment. The incorporation of 5% T-ZnOw into the resin powder was optimal to give appropriate antibacterial activity, long-term antibacterial effectiveness, and mechanical properties.