In this study the corrosion resistance of Ti30Ta experimental alloy was evaluated when submitted to different deformation rates. Alloys were processed in arc melting, furnace, forged and treated. The samples were machined in accordance with ASTME9-09 standard to carry out compression tests. The influence of deformation was evaluated by optical microscopy and XRD, and Eletrochemical parameters were analyzed in the most severe condition of deformation (22%). Corrosion resistance exhibited the same behavior for two conditions, 22% and without deformation.
ResumoA utilização de implantes metálicos no corpo humano é hoje mais uma alternativa para restaurar partes danificadas melhorando a qualidade de vida. Ciências como a Nanotecnologia, Engenharia Genética e Engenharia de Materiais trabalham em conjunto para o desenvolvimento e avanço no ramo dos biomateriais. A escolha de um biomaterial deve ser criteriosa, e é por essa razão que esse trabalho de caracterização da superfície da liga de Ti-7,5Mo foi realizado. A liga sofreu modificação química da superfície com um recobrimento de um filme uniforme de TiO 2 por meio da oxidação anódica nos potenciais de 10V e 20V. Os resultados foram avaliados com os recursos de microscopia MEV-EDS para análise topográfica do filme, DRX para verificar a presença da fase cristalina do óxido e ângulo de contato para medir a energia superficial do material para aplicação biomédica. Descritores: Nanotubos; Ligas; Oxidação Química. AbstractThe use of metallic implants in the human body is now an alternative for restoring damaged parts of improving the quality of life. Sciences such as Nanotechnology, Genetic Engineering and Materials Engineering work together for the development and advancement in the field of biomaterials. The choice of a biomaterial should be careful, and it is for this reason that work to characterize the surface of the alloy Ti-7,5Mo was conducted. The league has undergone chemical modification of the surface with a coating of a uniform film of TiO 2 by anodizing the potential of 10V and 20V. The results were evaluated with SEM-EDS microscopy resources for topographic analysis of the film, XRD to verify presents the crystalline phase of oxide and Contact Angle measuring the surface energy of the material for biomedical applications. Descriptors: Nanotubes; Alloys; Chemical Oxidation. ResumenEl uso de implantes metálicos en el cuerpo humano es ahora una alternativa para la restauración de las partes dañadas de la mejora de la calidad de vida. Ciencias como la nanotecnología, la ingeniería genética y la Ingeniería de Materiales trabajan en conjunto para el desarrollo y avance en el campo de los biomateriales. La elección de un biomaterial debe tener cuidado, y es por esta razón que el trabajo para caracterizar se llevó a cabo la superficie de la aleación de Ti-7,5Mo. La liga ha sufrido modificación química de la superficie con un recubrimiento de una película uniforme de TiO 2 por anodización el potencial de 10V y 20V. Los resultados se evaluaron con recursos de microscopía SEM-EDS para análisis topográfico de la película, XRD para verificar la presencia de la fase cristalina, del ángulo de contacto y la medición de la energía de superficie del material para aplicaciones biomédicas.
ResumoLigas de titânio são amplamente utilizadas na reparação de tecido ósseo devido suas excelentes propriedades de volume. Neste estudo foram analisado o potencial bactericida de tratamentos de superfície na liga Ti7,5Mo. As amostras foram anodizadas em NH 4 F/H 2 O/glicerol para crescimento de nanotubos de TiO 2 , posteriormente foram cobertas com uma manta de PCL eletrofiado e realizado a incorporação de clorexidina por dois métodos, imersão e gotejamento. A superfície foi analisada por microscopia eletrônica de varredura e medidas de ângulo de contato. O efeito bactericida foi analisado por meio da cultura de C. albicans e S. aureus. A incorporação por imersão apresentou resultados mais satisfatórios.Descritores: Materiais Biocompativeis; Titânio; Ligas; Nanotubos; Propriedades de Superfície. AbstractTitanium alloys are widely used in the repair of bone tissue due to their excellent properties. In this study the bactericidal potential of surface treatments in the Ti7.5Mo alloy was analyzed. The samples were anodized in NH 4 F/H 2 O/glycerol for the growth of TiO 2 nanotubes, later covered with electrolyzed PCL and made the incorporation of chlorhexidine by two methods, immersion and dripping. The surface was analyzed by scanning electron microscopy and contact angle measurements. The bactericidal effect was analyzed by culture of C. albicans and S. aureus. The incorporation by immersion presented more satisfactory results.Descriptors: Biocompatible Biomaterials; Titanium; Alloys; Nanotubes; Surface Properties. ResumenLas aleaciones de titanio son ampliamente utilizadas en la reparación del tejido óseo debido a sus excelentes propiedades. En este estudio se analizó el potencial bactericida de los tratamientos superficiales en la aleación Ti7.5Mo. Las muestras se anodizaron en NH 4 F/H 2 O/glicerol para el crecimiento de nanotubos de TiO 2 , posteriormente se cubrieron con PCL electrolizada e hicieron la incorporación de clorhexidina por dos métodos, inmersión y goteo. La superficie se analizó mediante microscopía electrónica de barrido y mediciones de ángulos de contacto. El efecto bactericida se analizó mediante cultivo de C. albicans y S. aureus. La incorporación por inmersión presentó resultados más satisfactorios.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.