An early diagnosis is of overwhelming importance for the management and prognosis of mucocutaneous cancer. Actinic cheilitis (AC), defined by the clonal expansion of genomically unstable keratinocytes, is the most common potentially malignant lesion affecting the lips. Squamous cell carcinoma (SCC) is the most frequent oral malignancy, and there is strong evidence that the majority of the SCCs of the lip originate from AC. There is considerable difficulty in discerning between dysplasia and invasive carcinomas solely on a clinical basis. Although dermoscopy has become an essential tool for skin tumor evaluation, reflectance confocal microscopy (RCM) is a non-invasive imaging technology that has proved itself extremely useful in the diagnosis and monitoring of several skin diseases, including AC and SCC. The present study aimed to re-emphasize the usefulness of RCM in the early detection of malignant transformation, using AC and SCC of the lips as working examples. Due to the apparent innocuousness of AC for numerous patients, it is not possible to overstress the importance of a correct and early diagnosis, proper treatment and long-term patient follow-up as being essential for preventing the progression to lip SCC, or for its timely diagnosis.

Squamous cells carcinoma (SCC) is the second most frequent of the keratinocyte-derived malignancies after basal cell carcinoma and is associated with a significant psychosocial and economic burden for both the patient himself and society. Reported risk factors for the malignant transformation of keratinocytes and development of SCC include ultraviolet light exposure, followed by chronic scarring and inflammation, exposure to chemical compounds (arsenic, insecticides, and pesticides), and immune-suppression. Despite various available treatment methods and recent advances in noninvasive or minimal invasive diagnostic techniques, the risk recurrence and metastasis are far from being negligible, even in patients with negative histological margins and lymph nodes. Analyzing normal, dysplastic, and malignant keratinocyte proteome holds special promise for novel biomarker discovery in SCC that could be used in the future for early detection, risk assessment, tumor monitoring, and development of targeted therapeutic strategies.

Superficial basal cell carcinoma (sBCC) is the second most frequent histological type of basal cell carcinoma (BCC), usually requiring a skin biopsy to confirm the diagnosis. It usually appears on the upper trunk and shoulders as erythematous and squamous lesions. Although it has a slow growth and seldom metastasizes, early diagnosis and management are of crucial importance in preventing local invasion and subsequent disfigurement. Dermoscopy is nowadays an indispensable tool for the dermatologist when evaluating skin tumors. Reflectance confocal microscopy (RCM) is a novel imaging technique that allows the non-invasive, in vivo quasi-microscopic morphological and dynamic assessment of superficial skin tumors. Moreover, it offers the advantage of performing infinite repeatable determinations to monitor disease progression and non-surgical treatment for sBCC. Herein, we present three lesions of sBCC evaluated using in vivo and non-invasive imaging techniques, emphasizing the usefulness of combining RCM with dermoscopy for increasing the diagnostic accuracy of sBCC.

Basal cell carcinoma (BCC) is the world's leading skin cancer in terms of frequency at the moment and its incidence continues to rise each year, leading to profound negative psychosocial and economic consequences. UV exposure is the most important environmental factor in the development of BCC in genetically predisposed individuals, this being reflected by the anatomical distribution of lesions mainly on sun-exposed skin areas. Early diagnosis and prompt management are of crucial importance in order to prevent local tissue destruction and subsequent disfigurement. Although various noninvasive or minimal invasive techniques have demonstrated their utility in increasing diagnostic accuracy of BCC and progress has been made in its treatment options, recurrent, aggressive, and metastatic variants of BCC still pose significant challenge for the healthcare system. Analysis of gene expression and proteomic profiling of tumor cells and of tumoral microenvironment in various tissues strongly suggests that certain molecules involved in skin cancer pathogenic pathways might represent novel predictive and prognostic biomarkers in BCC.

(1) Background: The immune microenvironment plays an important role in carcinogenesis and has prognostic potential in many types of cancer. In this study we assess the prognostic character of tumor-infiltrating immune cells CD4+, CD8+ and CD56+ in resectable oral squamous cell carcinoma (OSCC); (2) Methods: We have evaluated the densities of CD4+, CD8+ and CD56+ in two distinct compartments, intratumor and invasion front, in 90 patients with OSCC; (3) Results: Significant differences were found between the tumor compartments for the CD4+ and CD8+ lymphocytes. An improved outcome (OS) was seen in patients with high densities of intratumor CD8+ lymphocytes (p = 0.0086), CD8+ lymphocytes at the front of invasion (p = 0.0011) and for intratumor CD56+ cells (p = 0.0016). Multivariate analysis confirmed the independent prognostic role of CD8+ at the front of invasion (OR = 3.75, CI95% 1.17–12.35, p = 0.026) and for intratumor CD56+ cells (OR = 3.669, CI95% 1.09–15.37, p = 0.035); (4) Conclusions: Tumor-infiltrating CD8+ lymphocytes at the front of invasion and CD56+ in the intratumor compartment display predictive traits in OSCC. A reach immune infiltration with these types of cells is associated with an improved patient outcome.

Background: squamous cell carcinoma (SCC) is the second most common type of malignancy worldwide. Skin and mucosa of the head and neck areas are the most frequently affected. An aggressive behavior in SCC is not easily detected, and despite all efforts, mortality in these types of cancer did not show major improvements during recent decades. In this study, we aim to determine the role of histological features available through standard pathology assessment in SCC and their relation with tumor behavior and patients’ survival. Method: in a group of one hundred patients diagnosed with SCC involving the head and neck areas, we assessed the presence of four histological features (tumor/stroma ratio, immune infiltration at the front of invasion, tumor-budding activity, and tumor necrosis), their correlations with tumor type (mucosal or cutaneous), tumor clinicopathological characteristics, and their prognostic potential. Results: the comparison between histological features in cutaneous versus mucosal SCC reveals no significant differences for any of the four parameters assessed. We found significant correlations between tumor/stroma ratio and lymphatic metastasis (p = 0.0275), perineural invasion (p = 0.0006), and clinical staging (p = 0.0116). Immune infiltration at the front of invasion revealed similar correlations with lymph node involvement (p = 0.002), perineural invasion (p = 0.0138), and clinical staging (p = 0.0043). Tumor budding and tumor necrosis correlated with the size of the tumor (p = 0.0077 and p = 0.0004) and the clinical staging (p = 0.0039 and p = 0.0143). In addition, tumor budding was significantly correlated with perineural invasion (p = 0.0454). In mucosal SCC, patients with improved outcome revealed high values for the tumor/stroma ratio (p = 0.0159) and immune infiltration at the front of invasion (p = 0.0274). However, the multivariate analysis did not confirm their independent prognostic roles. Conclusions: extended histological assessments that include features such as tumor/stroma ratio, immune infiltration at the front of invasion, tumor budding, and tumor necrosis can be an easy, accessible method to collect additional information on tumor aggressiveness in skin and mucosa SCC affecting the head and neck areas.

recipient site had at least 10-mm residual height, but less than 4.3-mm bucco-lingual dimension. Autogenous bone blocks were harvested from the mandibular ramus. In the first group ramus block was used in association with platelet-rich fibrin and in the second in association with pericardium membrane. Implant surgery was performed 4 months after bone graft surgery when a total number of 44 implants were placed. Abutments were placed 4 months after implant surgery followed by final restoration. Ramus bone graft was successful in 100% patients for the first group and in 91.67% patients for the second group. Measurement on cone beam computed tomography revealed an average of 5.35 mm of lateral ridge augmentation for group 1 and 5.099 mm for group 2, achieved 4 months after surgery. All implants placed received fixed prosthetic restorations and are in use. Ramus block grafts can be used to allow optimal implant placement, with favor long-term success. Lateral ridge augmentation using mandibular ramus bone graft in association with platelet-rich fibrin is a more predictable and successful technique.

Background: A maxillofacial prosthesis, an alternative to surgery for the rehabilitation of patients with facial disabilities (congenital or acquired due to malignant disease or trauma), are meant to replace parts of the face or missing areas of bone and soft tissue and restore oral functions such as swallowing, speech and chewing, with the main goal being to improve the quality of life of the patients. The conventional procedures for maxillofacial prosthesis manufacturing involve several complex steps, are very traumatic for the patient and rely on the skills of the maxillofacial team. Computer-aided design and computer-aided manufacturing have opened a new approach to the fabrication of maxillofacial prostheses. Our review aimed to perform an update on the digital design of a maxillofacial prosthesis, emphasizing the available methods of data acquisition for the extraoral, intraoral and complex defects in the maxillofacial region and assessing the software used for data processing and part design. Methods: A search in the PubMed and Scopus databases was done using the predefined MeSH terms. Results: Partially and complete digital workflows were successfully applied for extraoral and intraoral prosthesis manufacturing. Conclusions: To date, the software and interface used to process and design maxillofacial prostheses are expensive, not typical for this purpose and accessible only to very skilled dental professionals or to computer-aided design (CAD) engineers. As the demand for a digital approach to maxillofacial rehabilitation increases, more support from the software designer or manufacturer will be necessary to create user-friendly and accessible modules similar to those used in dental laboratories.