This paper presents a numerical modeling study of one ethanol spray flame from the Delft Spray-in-Hot-Coflow (DSHC) database, which has been used to study Moderate or Intense Low-oxygen Dilution (MILD) combustion of liquid fuels (Correia Rodrigues et al. Combust. Flame 162, 759-773, 2015). A "Lagrangian-Lagrangian" approach is adopted where both the joint velocity-scalar Probability Density Function (PDF) for the continuous phase and the joint PDF of droplet properties are modeled and solved. The evolution of the gas phase composition is described by a Flamelet Generated Manifold (FGM) and the interaction by exchange with the mean (IEM) micro-mixing model. Effects of finite conductivity on droplet heating and evaporation are accounted for. The inlet boundary conditions starting in the dilute spray region are obtained from the available experimental data together with the results of a calculation of the spray including the dense region using ANSYS Fluent 15. A method is developed to determine a good estimation for the initial droplet temperature. The inclusion of the "1/3" rule for droplet evaporation and dispersion models is shown to be very important. The current modeling approach is capable of accurately predicting main properties, including mean velocity, droplet mean diameter and number density. The gas temperature is under-predicted in the region where the enthalpy loss due to droplet evaporation is important. The flame structure analysis reveals the existence of two heat release regions, respectively having the characteristics of a premixed and a diffusion flame. The experimental and modeled temperature PDFs are compared, highlighting the capabilities and limitations of the proposed model.
Abstract:In this paper we report a new development in the numerical model for aluminum-steam combustion. This model is based on the diffusion flame of the continuum regime and the thermal equilibrium between the particle and the flow field, which can be used to calculate the aluminum particle combustion model for two phase calculation conditions. The model prediction is in agreement with the experimental data. A new type of vortex combustor is proposed to increase the efficiency of the combustion of aluminum and steam, and the mathematical model of the two phase reacting flow in this combustor is established. The turbulence effects are modeled using the Reynolds Stress Model (RSM) with Linear Pressure-Strain approach, and the Eddy-Dissipation model is used to simulate the gas phase combustion. Aluminum particles are injected into the vortex combustor, forming a swirling flow around the chamber, whose trajectories are traced using the Discrete Phase Model (DPM). The simulation results show that the vortex combustor can achieve highly efficient combustion of aluminum and steam. The influencing factors, such as the eccentric distance of the inlet of aluminum particles, particle size and steam inlet diameter, etc., are studied.
Increasing evidence reveals that breast cancer stem cells (BCSCs) subtypes with distinct properties are regulated by their abnormal metabolic changes; however, the specific molecular mechanism and its relationship with tumor microenvironment (TME) are not clear. In this study, we explored the mechanism of lactate dehydrogenase A (LDHA), a crucial glycolytic enzyme, in maintaining cancer stemness and BCSCs plasticity, and promoting the interaction of BCSCs with tumor associated macrophages (TAMs). Firstly, the expression of LDHA in breast cancer tissues was much higher than that in adjacent tissues and correlated with the clinical progression and prognosis of breast cancer patients based on The Cancer Genome Atlas (TCGA) data set. Moreover, the orthotopic tumor growth and pulmonary metastasis were remarkable inhibited in mice inoculated with 4T1-shLdha cells. Secondly, the properties of cancer stemness were significantly suppressed in MDA-MB-231-shLDHA or A549-shLDHA cancer cells, including the decrease of ALDH+ cells proportion, the repression of sphere formation and cellular migration, and the reduction of stemness genes (SOX2, OCT4, and NANOG) expression. However, the proportion of ALDH+ cells (epithelial-like BCSCs, E-BCSCs) was increased and the proportion of CD44+ CD24− cells (mesenchyme-like BCSCs, M-BCSCs) was decreased after LDHA silencing, suggesting a regulatory role of LDHA in E-BCSCs/M-BCSCs transformation in mouse breast cancer cells. Thirdly, the expression of epithelial marker E-cadherin, proved to interact with LDHA, was obviously increased in LDHA-silencing cancer cells. The recruitment of TAMs and the secretion of CCL2 were dramatically reduced after LDHA was knocked down in vitro and in vivo. Taken together, LDHA mediates a vicious cycle of mutual promotion between BCSCs plasticity and TAMs infiltration, which may provide an effective treatment strategy by targeting LDHA for breast cancer patients.
BackgroundLymphopenia is a known significant factor for treatment outcome in cancer patients, with underlying risk factor poorly understood in breast cancer. We hypothesize that the effective dose to the circulating immune cells (EDIC) which was related with lymphopenia in lung cancer will also have significant effect for radiation induced lymphopenia (RIL) in patients with breast cancer.Material and MethodsPatients treated with adjuvant radiotherapy (RT) and with complete blood tests within one week from RT end/start (post/preRT) were eligible in this study. Radiation dosimetric factors were collected retrospectively, and EDIC for each patient was calculated based on the doses to lung, heart and total body according to the model description, as previously reported. RIL was defined by the CTCAE5.0 based on postRT peripheral lymphocyte count (PLC). Linear regression was first used to test the correlation between EDIC with post/preRT PLC ratio and postRT PLC, using all these as continuous variables. Normal tissue complication probability (NTCP) was used to develop models that predict the CTCAE graded RIL from EDIC.ResultsA total of 735 patients were eligible. The mean post/preRT PLC ratio was 0.66 (95% CI: 0.64-0.68) and mean EDIC of breast cancer was 1.70Gy (95% CI: 1.64-1.75). Both post/preRT PLC ratio and postRT PLC were significantly correlated with EDIC (P<0.001), with R2 of 0.246. For patients with normal preRT PLC, the post/preRT PLC ratio was better associated with EDIC, and postRT PLC was expressed as PLCpreRT*(0.89−0.16*EDIC). For patients with preRT lymphopenia, postRT PLC was better associated with EDIC and it was 1.1 – 0.17 * EDIC. Using binned EDIC as the dose variable, the bootstrap validated NTCPs fit the data nicely with R2 of 0.93, 0.96, and 0.94 for grade-1, grade-2, and grade-3 RIL, respectively. The corresponding EDIC to induce 50% of grade-1, grade-2 and grade-3 RIL was 1.2, 2.1 and 3.7 Gy, respectively.ConclusionEDIC is a significant factor for RIL in patients with breast cancer, and may be used to compute the risk of lymphopenia in each individual patient with the use of the conventional NTCP modeling. External validation is needed before the EDIC can be used to guide RT plan.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.