With the growth of the use of carbon fiber-reinforced polymer (CFRP) in various fields, the recovery of carbon fibers from CFRP waste is becoming a significant research direction. In the present work, degrading epoxy resin and recycling carbon fibers from CFRP waste by microwave thermolysis and traditional thermolysis were studied. The carbon fibers were successfully recovered by thermolysis under an oxygen atmosphere in this study. The properties of the recovered carbon fibers were characterized by field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and Raman spectroscopy. The result shows that using microwave thermolysis to recover carbon fibers from CFRP waste is an attractive prospect. Compared to the traditional method, the reaction time was reduced by 56.67%, and the recovery ratio was increased by 15%. Microwave thermolysis is faster, more efficient, requires less energy, and obtains cleaner recovered carbon fibers than those recovered using traditional thermolysis.Processes 2019, 7, 207 2 of 12 including mechanical processes [14,15], chemical methods [4,[16][17][18][19][20], and thermal technology [3,[21][22][23]. However, long carbon fibers are difficult to obtain using a mechanical process, and their mechanical properties are seriously damaged with this technique [24,25]. Liu et al. [13], Yildirir et al. [19], and Hyde et al. [20] have investigated recycling carbon fibers from CFRP using different solvents under subcritical or supercritical conditions. These methods are expensive, difficult to industrialize, and produce large amounts of liquid waste and hazardous gases [1]. Yang et al. [3], López et al. [22], and Ye et al. [23] have studied thermolysis methods of recovering carbon fibers from CFRP. The pyrolysis process is not very economical, producing multiple hazardous gases and depositing char on the carbon fiber surfaces [1,19,25]. Therefore, research to develop new methods of recovering carbon fibers from CFRP has begun.Microwave heating is gradually being used more often in the area of material processing due to its advantages of rapid, uniform, and selective heating [26]. Microwave heating is the process of coupling materials with microwaves, absorbing electromagnetic energy and transforming it into heat within the material volume, in which the heat is generated from the inside to the entire volume [27][28][29]. Therefore, the microwave method can treat uniform samples due to its features of volumetric and internal heating [30,31]. Yingguang Li et al. [32,33] have reported curing of CFRP by microwave energy, and CFRP can absorb microwave energy and be heated effectively. This study provides a great reference for microwave applications in the preparation and recovery of CFRP. Long Jiang et al. [34] reported that microwave irradiation is a flexible, easy-to-control, efficient method to recover high-value carbon fibers, and recovered carbon fibers could be directly used as reinforcement in new polymers (Polypropylene and nyl...
The existence of lead ions seriously affects the quality of many metal products in metallurgical enterprises. Currently, the various methods of lead-ion removal tried by researchers will affect valuable metals in the removal process, thus resulting in low economic efficiency. In this study, a novel metal–organic framework adsorbent (UiO-FHD) which efficiently and selectively captures lead ions is developed by introducing multiple ligands. The maximum adsorption capacity of lead ions is 433.15 mg/g at pH 5. The adsorption process accords with the pseudo-second-order kinetic and the Langmuir isotherm models at room temperature. Thermodynamic experiments indicate that the removal of Pb(II) is facilitated by appropriate temperature reduction. The performance tests indicate that UiO-FHD maintains a high removal rate of 90.35% for Pb(II) after four consecutive adsorption–desorption cycles. The distribution coefficient of lead ions (26.7 L/g) shows that UiO-FHD has excellent selective adsorption for lead ions. It is revealed that the chelation of the sulfhydryl groups and the electrostatic interaction of the hydroxyl groups are the dominant factors to improve the removal rate of Pb(II) by density functional theory calculations. This study clarifies the value of self-designed novel organic ligands in metal–organic framework materials that selectively capture heavy-metal ions.
With the increasing demand for lithium, the shortage of resources has become increasingly apparent. In order to conserve resources and to improve recovery, the extraction of lithium from salt lakes has become mandatory for sustainable development. Porous metal-organic framework (MOF) materials have attracted extensive attention due to their high/tunable porosity, pore function, multiple pore structures/compositions, and open metal sites. Moreover, MOFs combine the advantages of other porous materials and have a wide range of applications, which have received significant interest from the scientific community. Therefore, the selection of MOFs materials, the optimization of preparation methods, and the research of lithium separators are key directions to improve the total yield of lithium resources in salt lakes in China. This study aims to improve the comprehensive utilization of resources after lithium extraction and strengthen the engineering technology research of lithium extraction from salt lakes. This study can help to achieve the goal of efficient, integrated, and sustainable utilization of salt lake resources. An attempt has been made to summarize the types and preparation methods of MOFs materials, as well as the separation mechanism of MOFs nanofiltration membranes, with reference to its application in lithium extraction from salt lake brine. Finally, the future development of MOFs nanofiltration membranes for lithium extraction from salt lakes is also proposed.
In recent years, with the development of science and technology, the strategic position of germanium is becoming more and more important, and the global demand for germanium is also increasing. At present, there is no unified description of the existence form of germanium in solutions. Based on the current mainstream acid leaching process of germanium, this paper studies the existing form and properties of germanium in sulfuric acid solutions. Through the characterization and analysis of Raman, FTIR, and XPS of three concentrations of pure germanium solution, it is clear that germanium mainly exists in the form of H2GeO3 and some Ge4+ in sulfuric acid solution. Through the Tyndall effect and zeta potential, it is determined that H2GeO3 exists in the form of colloid in sulfuric acid solution. With the increase of germanium concentration, H2GeO3 will polymerize in a sulfuric acid solution to form polygermanic acid, and the H2GeO3 colloidal dispersion system becomes more stable. This study clarifies the existing form and properties of germanium in sulfuric acid solution, which is of great significance to the leaching extraction of germanium-containing materials and the development of the germanium industry.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.