Balancing interfacial stability and Li+ transfer kinetics through surface engineering is a key challenge in developing high-performance battery materials. Although conformal coating enabled by atomic layer deposition (ALD) has shown great promise in controlling impedance increase upon cycling by minimizing side reactions at the electrode–electrolyte interface, the coating layer itself usually exhibits poor Li+ conductivity and impedes surface charge transfer. In this work, we have shown that by carefully controlling postannealing temperature of an ultrathin ZrO2 film prepared by ALD, Zr4+ surface doping could be achieved for Ni-rich layered oxides to accelerate the charge transfer yet provide sufficient protection. Using single-crystal LiNi0.6Mn0.2Co0.2O2 as a model material, we have shown that surface Zr4+ doping combined with ZrO2 coating can enhance both the cycle performance and rate capability during high-voltage operation. Surface doping via controllable postannealing of ALD surface coating layer reveals an attractive path toward developing stable and Li+-conductive interfaces for single-crystal battery materials.

No abstract

Electrochromic energy storage devices (EESDs) are incorporating electrochromic and energy storage functions, which can visually display energy storage levels in real-time to promote the next generation of transparent battery development. However, their performances are still limited for practical applications. Herein, a self-powered EESD based on complex niobium tungsten oxide is designed using aqueous Zn 2+ and hybrid Zn 2+ /M n+ (M n+ = Al 3+ , Mg 2+ , and K + ) electrolytes. The results reveal that the use of Zn 2+ /Al 3+ hybrid electrolyte achieves superior electrochromic performances including a short self-coloring time, high optical contrast, and excellent cyclic stability. Furthermore, it is also found that the self-coloring process is accompanied by a high discharged capacity of niobium tungsten oxide, with high optical modulation in the Zn 2+ /Al 3+ hybrid electrolyte. The detailed mechanism on the performances of EESD using various electrolytes is systematically studied. This work provides a simple and effective strategy for an aqueous and self-powered EESD with high optical contrast and good cycle stability.

No abstract

Thin films with effective ion sieving ability are highly desired in energy storage and conversion devices, including batteries and fuel cells. However, it remains challenging to design and fabricate cost-effective and easy-to-process ultrathin films for this purpose. Here, we report a 300 nm-thick functional layer based on porous organic cages (POCs), a new class of porous molecular materials, for fast and selective ion transport. This solution processable material allows for the design of thin films with controllable thickness and tunable porosity by tailoring cage chemistry for selective ion separation. In the prototype, the functional layer assembled by CC3 can selectively sieve Li+ ions and efficiently suppress undesired polysulfides with minimal sacrifice for the system’s total energy density. Separators modified with POC thin films enable batteries with good cycle performance and rate capability and offer an attractive path toward the development of future high-energy-density energy storage devices.