Successful regeneration of weight-bearing bone defects and criticalsized cartilage defects remains a major challenge in clinical orthopedics. In the past decades, biodegradable polymer materials with biomimetic chemical and physical properties have been rapidly developed as ideal candidates for bone and cartilage tissue engineering scaffolds. Due to their unique advantages over other materials of high specific-surface areas, suitable mechanical strength, and tailorable characteristics, scaffolds made of polymer fibers have been increasingly used for the repair of bone and cartilage defects. This Review summarizes the preparation and compositions of polymer fibers, as well as their characteristics. More importantly, the applications of polymer fiber scaffolds with well-designed structures or unique properties in bone, cartilage, and osteochondral tissue engineering have been comprehensively highlighted. On the whole, such a comprehensive summary affords constructive suggestions for the development of polymer fiber scaffolds in bone and cartilage tissue engineering.

Fiber structures with nanoscale diameters offer many fascinating features, such as excellent mechanical properties and high specific surface areas, making them attractive for many applications. Among a variety of technologies for preparing nanofibers, electrospinning is rapidly evolving into a simple process, which is capable of forming diverse morphologies due to its flexibility, functionality, and simplicity. In such review, more emphasis is put on the construction of polymer nanofiber structures and their potential applications. Other issues of electrospinning device, mechanism, and prospects, are also discussed. Specifically, by carefully regulating the operating condition, modifying needle device, optimizing properties of the polymer solutions, some unique structures of core–shell, side-by-side, multilayer, hollow interior, and high porosity can be obtained. Taken together, these well-organized polymer nanofibers can be of great interest in biomedicine, nutrition, bioengineering, pharmaceutics, and healthcare applications.

Conductivity and alignment of scaffolds are two primary factors influencing the efficacy of nerve repair. Herein, conductive composite fibers composed of poly(ɛ-caprolactone) (PCL) and carbon nanotubes (CNTs) with different orientation degrees are prepared by electrospinning at various rotational speeds (0, 500, 1000, and 2000 rpm), and meanwhile the synergistic promotion mechanism of aligned topography and electrical stimulation on neural regeneration is fully demonstrated. Under an optimized rotational speed of 1000 rpm, the electrospun PCL fiber exhibits orientated structure at macroscopic (mean deviation angle = 2.78°) or microscopic crystal scale (orientation degree = 0.73), decreased contact angle of 99.2°± 4.9°, and sufficient tensile strength in both perpendicular and parallel directions to fiber axis (1.13 ± 0.15 and 5.06 ± 0.98 MPa). CNTs are introduced into the aligned fiber for further improving conductivity (15.69-178.63 S m −1), which is beneficial to the oriented growth of neural cells in vitro as well as the regeneration of injured sciatic nerves in vivo. On the basis of robust cell induction behavior, optimum sciatic nerve function index, and enhanced remyelination/axonal regeneration, such conductive PCL/CNTs composite fiber with optimized fiber alignment may serve as instructive candidates for promoting the scaffold-and cell-based strategies for neural repair.

Multifunctional hydrogels have important applications in various fields such as artificial muscles, wearable devices, soft robotics, and tissue engineering, especially for those with favorable mechanical properties, good low-temperature resistance, and stimuli-responsive capabilities. In the current study, a type of polyacrylamide/sodium alginate/carbon nanotube (PAAm/SA/CNT) double-network (DN) hydrogel was fabricated, which exhibited a high tensile strength of 271.68 ± 6.04 kPa, a favorable conductivity of 1.38 ± 0.17 S·m–1, and a good self-healing ability under heating conditions. In addition, the composite hydrogel exhibited controllable photomechanical deformations under near-infrared irradiation, such as bending, swelling, swimming, and object grasping. To further broaden the applications of the hydrogel in low-temperature environments, calcium chloride (CaCl2) was introduced into such a PAAm/SA/CNT DN hydrogel as an additive. Interestingly, the tensile/compressive strengths as well as elasticity were well-maintained at a temperature as low as −20 °C. In addition, the PAAm/SA/CNT/CaCl2 hydrogel presented excellent conductivity, recoverability, and strain-sensing capability under such extreme conditions. Overall, the investigations conducted in this paper have provided potentially new methods and inspirations for the generation of multifunctional PAAm/SA/CNT/CaCl2 hybrid DN hydrogels toward extended applications.

In article number 1903279, Jin Zhang, Jianlin Zuo, Jun Zou, Jianxun Ding, and co‐workers summarize the advances in the preparation, composition, and characteristics of polymer fibers, as well as their applications in bone and cartilage tissue engineering, and propose potential challenges and opportunities.