No abstract

Glassy, polydomain azobenzene liquid crystal polymer networks (azo-LCNs) have been synthesized, characterized, and modeled to understand composition dependence on large amplitude, bidirectional bending, and twisting deformation upon irradiation with linearly polarized blue-green (440–514 nm) light. These materials exhibit interesting properties for adaptive structure applications in which the shape of the photoresponsive material can be rapidly reconfigured with light. The basis for the photomechanical output observed in these materials is absorption of actinic light by azobenzene, which upon photoisomerization dictates an internal stress within the local polymer network. The photoinduced evolution of the underlying liquid crystal microstructure is manifested as macroscopic deformation of the glassy polymer film. Accordingly, this work examines the polarization-controlled bidirectional bending of highly concentrated azo-LCN materials and correlates the macroscopic output (observed as bending) to measured blocked stresses upon irradiation with blue-green light of varying polarization. The resulting photomechanical output is highly dependent on the concentration of crosslinked azobenzene mesogens employed in the formulation. Experiments that quantify photomechanical bending and photogenerated stress are compared to a large deformation photomechanical shell model to quantify the effect of polarized light interactions with the material during static and dynamic polarized light induced deformation. The model comparisons illustrate differences in internal photostrain and deformation rates as a function of composition and external mechanical constraints.

No abstract

factor, and the value of C, depends upon the drop size and velocity and the nature of the drop and target surface. For water sprays impacting a dry, lightly dust-laden surface of bituminous coal, the dynamic coverage is about 10 times the static coverage because of the drop flattening upon impact; i.e., adequate dynamic coverage can be achieved without saturating the surface. In a lightly dust-laden surface, the impacting drops essentially completely scavenge the particles in the swept area.

The microstructures of exoskeletons from Homarus americanus (American lobster) and Callinectes sapidus (Atlantic blue crab) were investigated to elucidate the mechanical behavior of such biological composites. Image analyses of the cross-sectioned exoskeletons showed that the two species each have three well-defined regions across the cuticle thickness where the two innermost regions (exocuticle and endocuticle) are load bearing. These regions consist of mineralized chitin fibers aligned in layers, where a gradual rotation of the fiber orientation of the layers results in repeating stacks. The exocuticle and endocuticle of the two species have similar morphology, but different thicknesses, number of layers, and number of stacks. Mechanics-based analyses showed that the morphology of the layered structure corresponds to a nearly isotropic structure. The cuticles are inter-stitched with pore canal fibers, running transversely to the layered structure. Mechanics-based analyses suggested that the pore canal fibers increase the interlaminar strength of the exoskeleton.

The non-toxic and wide bandgap material TiO2 is explored as an n-type buffer layer on p-type Cu(In,Ga)Se2 (CIGS) absorber layer for thin film solar cells. The amorphous TiO2 thin film deposited by atomic layer deposition process at low temperatures shows conformal coverage on the CIGS absorber layer. Solar cells from non-vacuum deposited CIGS absorbers with TiO2 buffer layer result in a high short-circuit current density of 38.9 mA/cm2 as compared to 36.9 mA/cm2 measured in the reference cell with CdS buffer layer, without compromising open-circuit voltage. The significant photocurrent gain, mainly in the UV part of the spectrum, can be attributed to the low parasitic absorption loss in the ultrathin TiO2 layer (~10 nm) with a larger bandgap of 3.4 eV compared to 2.4 eV of the traditionally used CdS. Overall the solar cell conversion efficiency was improved from 9.5% to 9.9% by substituting the CdS by TiO2 on an active cell area of 10.5 mm2. Optimized TiO2/CIGS solar cells show excellent long-term stability. The results imply that TiO2 is a promising buffer layer material for CIGS solar cells, avoiding the toxic CdS buffer layer with added performance advantage.

We explore key mechanical responses of the layered microstructure found in selected parts of the exoskeletons (pronotum, leg and elytron) of P opillia japonica (Japanese beetle). Image analyses of exoskeleton cross-sections reveal four distinct layered regions. The load-bearing inner three regions (exocuticle, mesocuticle, and endocuticle) consist of multiple chitin-protein layers, in which chitin fibers align in parallel. The exocuticle and mesocuticle ~ave a heli~oidal s.truc~re , where the stacking sequence is characterized by a gradual rotatiOn of the fiber onentatwn. The endocuticle has a pseudo-orthogonal structur~, where two orthogonal layers are joined by a thin helicoidal region. The mechamcs-based analyses suggest that, compared with the conventional cross-ply structure, the pseudo-orthogonal configuration reduces the maximum tensile stress over the exoskeleton cross-section and increases the interfacial fracture resistance. The coexistence of the pseudo-orthogonal and helicoidal structures reveals a competition between the in-plane isotropy and the interfacial strength in nature' s design of the biocomposite.

A novel scheme for hybridizing inkjet‐printed thin film Cu(In,Ga)Se2 (CIGS) solar cells with self‐assembled clusters of nanocrystal quantum dots (NQDs), which provides a 10.9% relative enhancement of the photon conversion efficiency (PCE), is demonstrated. A non‐uniform layer of NQD aggregates is deposited between the transparent conductive oxide and a CdS/CIGS p‐n junction using low cost pulsed‐spray deposition. Hybridization significantly improves the external quantum efficiency of the hybrid devices in the absorption range of the NQDs and in the red to near‐IR parts of the spectrum. The low wavelength response enhancement is found to be induced by luminescent down‐shifting (LDS) from the NQD layer, while the increase at longer wavelengths is attributed to internal scattering from NQD aggregates. LDS is demonstrated using time‐resolved spectroscopy, and the morphology of the NQD layer is investigated in fluorescence microscopy and cross‐sectional transmission electron microscopy. The influence of the NQD dose on the PCE of the hybrid devices is investigated and an optimum value is obtained. The low costs and limited material consumptions associated with pulsed‐spray deposition make these flexible hybrid devices promising candidates to help push thin‐film photovoltaic technology towards grid parity.