Abstract-Various isolation improvement techniques for MIMO WLAN card bus applications consisted of three closely spaced loop antennas are presented and investigated both numerically and experimentally in this paper. The proposed techniques are easily implemented and proven effective to achieve high isolation among the antennas which is a must for MIMO terminals to receive uncorrelated signals with good system throughputs.

No abstract

[1] The radiation characteristics of ellipsoidal reflector antennas in the near zone of antenna aperture are investigated using Physical Optics (PO) approximations. This antenna has potential applications in the near-field communications because its radiation focuses in the near zone. Analytical formulations to predict the radiation efficiency and exhibit field phenomena are developed. Its applications as a RFID reader antenna at 2.4 GHz are demonstrated by numerical simulations and measurements over a realistic implementation of offset reflector fed by a microstrip patch antenna. Both numerical and experimental studies are performed to validate this antenna design.

This paper presents a dual‐band reflectarray antenna which operates at 0.915 and 2.4 GHz to radiate electromagnetic fields focused in the near‐zone of array aperture. The design uses two stacked feed antennas operated at 0.915 and 2.4 GHz, respectively, so that the currently available RFID systems in the market can be simultaneously used in an independent fashion. Numerical investigations on the radiation characteristics of this reflectarray, as well as an experimental validation, are presented to demonstrate its feasibility.

This paper presents the design of reflectarray antennas to radiate an optimum near-field distribution by using the procedure of steepest decent method to synthesize the impressed phases of reflectarray elements. In particular, the closed-form formulations used in the electromagnetic modeling were developed for an efficient design. The design was further implemented to realize a reflectarray of microstrip patch elements, which is illuminated by the radiation of a feed antenna at the 2.4 GHz band in the radio frequency identification applications. Numerical investigations as well as experimental measurements over a prototype are presented to validate the feasibility of the developed models and the implemented antenna structure.