No abstract

Greater charge and a higher degradation rate of hydrocarbons in soil are obtained using a multi-anode bioelectrochemical system.

A high-performance zinc oxide/tin dioxide (ZnO/SnO2) humidity sensor was developed using a simple solvothermal method. The sensing mechanism of the ZnO/SnO2 humidity sensor was evaluated by analyzing its complex impedance spectra. The experimental results prove that the ZnO/SnO2 composite material has a larger specific surface area than pure SnO2, which allows the composite material surface to adsorb more water to enhance the response of the ZnO/SnO2 humidity sensor. ZnO can also contribute to the generation of oxygen-rich vacancies on the ZnO/SnO2 composite material surface, allowing it to adsorb a large amount of water and rapidly decompose water molecules into conductive ions to increase the response and recovery speed of the ZnO/SnO2 humidity sensor. These characteristics allowed the Z/S-2 humidity sensor to achieve a higher response (1,225,361%), better linearity, smaller hysteresis (6.6%), faster response and recovery speeds (35 and 8 s, respectively), and long-term stability at 11–95% relative humidity. The successful preparation of the ZnO/SnO2 composite material also provides a new direction for the design of SnO2-based resistance sensors with high humidity-sensing performance.

No abstract

No abstract