Lapisan “E” Lapangan “JUY” ini berlokasi di Cekungan Sumatera Selatan.Lapisan “E” Lapangan “JUY” ini telah dikembangkan sejak Desember 1969.Penentuan jenis tenaga dorong atau Drive Mechanism pada Lapisan “E”Lapangan “JUY” dengan menggunakan tiga metode yakni metode kualitatif,Drive Index, dan Ganesh Thakur. Pada perhitungan isi awal minyak di tempat(Original Oil In Place) pada Lapisan “E” Lapangan “JUY” denganmengggunakan Material Balance Havlena – Odeh yang nantinya akandibandingkan dengan data volumetrik yang sudah tersedia. Lapisan “E”Lapangan “JUY” memiliki jenis tenaga dorong berupa Water Drive karenapada hasil analisa jenis tenaga dorong kualitatif nilai Gas Oil Ratio yang relatifkonstan dan nilai Water Cut yang tinggi, pada analisa Drive Index nilai WaterIndex yang lebih dominan, dan pada analisa Ganesh Thakur memiliki skemagrafik yang mirip dengan Water Drive. Nilai perhitungan isi awal minyak ditempat dengan menggunakan metode Material Balance Havlena - Odeh sebesar40 MMSTB. Dari hasil tersebut maka bisa ketahui bahwa perbedaan nilaiantara OOIP volumetrik dan OOIP yang didapatkan dengan menggunakanMaterial Balance Havlena - Odeh adalah sebesar 1% saja. Dengan menggunakansoftware OFM didapatkan hasil berupa forecast produksi yang diketahuisampai Maret 2030. Setelah melakukan forecast produksi, maka bisadidapatkan nilai Estimated Ultimate Recovery (EUR) sebesar 19.7569 MMSTBdan nilai Remaining Reserve (RR) sebesar 275.84 MSTB dengan Recovery Factor(RF) sebesar 49 %.
Parameter reservoir yang paling penting untuk diketahui adalah isi minyakawal ditempat (Original Oil in Place ) yang dapat diproduksikan secaraekonomis. Pengertian isi minyak awal adalah jumlah total minyak mula-mulayang terdapat di dalam suatu reservoir. Perhitungan isi minyak awal pada suatureservoir memerlukan beberapa parameter, yaitu data tekanan, temperatur, faktorvolume formasi gas, faktor volume formasi minyak, faktor volume formasi air,faktor volume formasi dua fasa dan kelarutan gas dalam minyak. Isi minyakawal pada Reservoir “H”adalah sebesar 25 MMSTB yang didapat dariperhitungan menggunakan metode volumetrik. Penelitian ini dilanjutkandengan menentukan jenis tenaga pendorong yang dihitung denganmenggunakan tiga metode yaitu Drive Index, Kualitatif, dan MetodeGanesh Thakur. Setelah menganalisa tenaga dorong dengan k e t i g a metodetersebut dapat disimpulkan bahwa jenis tenaga pendorong pada Reservoir“H” ini adalah solution gas drive.Setelah mengetahui jenis tenaga dorong dariReservoir “H”, setelah itu dapat dilakukan perhitungan isi mimyak awalditempat. Berdasarkan perhitungan dengan Metode Material Balance didapatisi minyak awal ditempat adalah sebesar 25,28 MMSTB yang dimanamempunyai persen kesalahan 1,01% jika dibandingkan dengan isi minyakawal yang dihitung dengan menggunakan metode volumetrik yaitu sebesar25 MMSTB. Perhitungan isi awal minyak yang kedua menggunakan metodeperhitungan M a t e r i a l B a l a n c e S t r a i g h t L i n e Havlena-Odehdidapatkan nilai isi minyak awal (Original Oil in Place) pada Reservoir “H”adalah senilai 25,75 MMSTB,yang dimana mempunyai persen kesalahansebesar 1,02% jika dibandingkan dengan isi minyak awal yang dihitung dengan25MMSTB.
<p>Lingkungan kerja yang aman, sehat dan bebas dari pencemaran adalah hal yang diingini oleh setiap perusahaan. Oleh sebab itu dirasa sangat penting, kami para dosen dari Program Studi Teknik Perminyakan Universitas Trisakti, mengadakan penyuluhan dan pelatihan tentang K3 terhadap para penambang tradisional di Desa Wonocolo, Jawa Timur. Penyuluhan dan pelatihan tersebut bertujuan untuk mengurangi terjadinya kecelakaan dan penyakit akibat kerja sehingga dapat meningkatkan sistem efisiensi dan produktivitas kerja. Perusahaan di Indonesia secara umum termasuk rendah kepeduliannya tentang K3 dibandingkan dengan negara-negara tetangga lain. Indonesia akan sulit menghadapi pasar global dengan kondisi seperti ini, karena akan mengalami ketidakefisienan pemanfaatan tenaga kerja disebabkan oleh produktivitas kerja yang rendah. Masalah-masalah yang telah diuraikan sebelumnya diupayakan untuk didekati dengan menggunakan gambar-gambar maupun alat peraga. Dengan adanya penyuluhan dan pelatihan tentang K3, diharapkan dapat mengurangi resiko kecelakaan dan gangguan kesehatan bagi para penambang maupun masyarakat di sekitarnya.</p>
<div class="WordSection1"><p><em>The purpose of this thesis is to calculate the original oil in place of ENH zone in X field. There are two methods to calculate the original oil in place of ENH zone, which is volumetric method and material balance method. From the calculation of original oil in place of ENH zone using volumetric method is 5.860.310 STB.</em></p><p><em>In Havlena - Odeh straight line material balance method needs the number of water influx. The water influx can be determine using Van-Everdingen Hurst method. The constant number of water influx of ENH zone is 311 BBL/psia. The original oil in place calculation of ENH zone using material balance method is 6.000.000 STB. Decline curve analysis is a method to determine the production performance and estimate ultimate recovery (EUR). By knowing the economic limit rate of ENH zone at 40 BOPD, it can be searched the oil rate and cumulative oil production of ENH zone. The economic limit rate of ENH is reached in March 2019 with recovery factor at 57,95%.</em></p><p><em>Keywords: original oil in place, volumetric, material balance, decline curve analysis</em></p></div>
<p>Dilakukan perhitungan isi awal minyak di tempat atau original oil in place (OOIP) dan recovery factor sebelum dan sesudah injeksi air pada reservoir Alfa. Pada perhitungan OOIP digunakan dua metode, yaitu metode volumetrik dan material balance garis lurus. Sebelum melakukan perhitungan OOIP dengan metode material balance garis lurus, jenis mekanisme pendorong harus terlebih dahulu diketahui untuk menentukan grafik yang digunakan dalam metode material balance garis lurus. Metode penentuan jenis mekanisme pendorong, yaitu metode perhitungan drive index dan Ganesh Thakur,. Sedangkan untuk menghitung recovery factor sebelum dan sesudah injeksi digunakan analisa decline curve yang dilakukan secara dua tahap, yaitu tahap primary recovery dan secondary recovery (injeksi air). Analisa decline curve ditentukan dengan menggunakan status sumur produki aktif yang relatif konstan Jenis exponent decline (b) yang dipilih adalah exponential decline curve, dengan nilai rate of decline (Di) telah otomatis terhitung saat penarikan garis decline dengan software OFM.</p><p> </p><p>Hasil perhitungan OOIP dengan menggunakan metode volumetric adalah sebesar 75.63 MMSTB dan untuk metode material balance garis lurus adalah sebesar 78.5 MMSTB. Sedangkan jenis mekanisme pendorong dari reservoir Alfa adalah solution gas drive.Dan hasil analisa decline curve pada tahap primary recovery menunjukan bahwa reservoir Alfa dapat berproduksi hingga 31 Mei 2012 dengan nilai Estimate Ultimate Recovery sebesar 24514.1 MSTB, dan Recovery Factor sebesar 31.32%. Sedangkan untuk tahap secondary recovery menunjukkan bahwa reservoir Alfa dapat berproduksi hingga 31 Maret 2022 dengan nilai Estimate Ultimate Recovery sebesar 781.314 MSTB, dan Recovery Factor sebesar 1%.</p>
<p>Determination of the initial oil content of a reservoir starts from exploration activities. In the initial stage, the determination of the initial oil reserves is determined. This aims to determine whether the project can be profitable for the company or not. Over time the determination of the initial contents of the oil continues to be carried out to improve the accuracy of calculations using the material balance method.<br />In the reservoir "ADZ" the type of reservoir is an undersaturated reservoir. This is because the initial pressure in 1980 was 2762.74 psia, while the bubble point pressure was 1625.8 psia. Until 2015 this reservoir was still above the bubble point pressure with a pressure of 1783.55 psia, this reservoir also had no gas cap in the initial conditions. The drive mechanism that works on this field is the solution for the gas drive.<br />Calculation of the initial content of oil in this final project uses 4 methods, namely volumetric method, material balance method, straight line, and Mbal software. Using the volumetric method, the initial oil reserves obtained at the place amounted to 174063462 STB, while the calculation of the initial oil reserves in place using the material balance method was 176497285 STB. The percentage difference in the initial content of oil between the methods is <5%.</p>
Quantitative analysis of reservoir properties in a well is determined by transient pressure analysis. Transient pressure according to its type consists of Pressure Build up and Pressure Draw Down. this analysis provides an overview of the characteristics of a reservoir. This analysis includes the process of determining drainage area, shape, heterogeneity, porosity, average pressure, skin, permeability, and distance from a reservoir to boundary or flow discontinuities. This test is to determine the ability of gas production in the PW-02 Well, carried out by using the Modified Isochronal test method. This test aims to determine the productivity of a potential (Absolute Open flow). Transient pressure test on PW-02 Well using the Pressure Build up Test (Type Curve Pressure Derivative) method, it is found that the well model is Vertical well and the reservoir model is Two porosity PSS. While the boundary model obtained is Rectangle. Then, the data obtained in the form of positive skin is 1.46, the permeability is 62.5 mD and the reservoir pressure is 2529.32 psia. Based on the analysis obtained Absolute Open Flow Potential (AOFP) is 117406 mscf/D. While the deliverability test value obtained is 117413 mscf/D with n value of 0.825.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.